Used Piller Generator – Undervoltage Supply for sale (17,513)

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW Kdodpfxsu Nzwus Aktol voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: like new (used), Year of construction: 2010, operating hours: 57 h, functionality: limited functionality, machine/vehicle number: op aanvraag, overall weight: 4,000 kg, fuel type: diesel, color: white, output frequency: 50 Hz, nominal power (apparent): 165 kVA, continuous power (apparent): 150 kVA, rotational speed (max.): 1,500 rpm, type of cooling: air, Turnkey Emergency Power Container (165 kVA) with AEG UPS System in swap body container. Are you looking for a comprehensive, ready-to-use solution for your business continuity? This heavy-duty emergency power installation offers the ultimate protection against power outages and voltage fluctuations. The entire setup is housed in a high-grade, climate-controlled container. The Installation Includes: 1. SDMO / John Deere Diesel Generator (165 kVA) Output: 165 kVA Stand-by / 150 kVA Continuous (400V). Engine: Reliable John Deere 6068 6-cylinder turbo diesel. Alternator: Leroy Somer LSA 44.2 with R438 AVR (automatic voltage regulator) for an extremely stable sine wave—essential for sensitive electronics. Condition: Recent year of manufacture (2019), excellently maintained. 2. AEG Power Solutions UPS System Provides seamless bridging (0 ms transfer time) in the event of grid failure. Filters electrical noise and protects your equipment against voltage spikes and drops. Kedpfxoy D Ubqe Aktedl Seamless communication with the SDMO generator for extended backup operations. 3. Climate-Controlled Container Housing Air Conditioning: Equipped with an industrial air conditioning system to keep UPS batteries and electronics at optimal operating temperature, regardless of external conditions. Security: Robust, lockable container suitable for direct outdoor placement (saving valuable indoor space). Plug-and-Play: Central connection points for easy integration into your existing infrastructure. Why choose this set? This configuration is specifically designed for critical environments where power loss is not an option, such as data centers, medical facilities, or high-end production lines. The combination of the powerful John Deere engine and the precision of AEG UPS ensures a true "no-break" power supply. Full technical specifications available on request. Price: €34,950 excl. VAT

Year of construction: 1983, condition: good (used), Ventilator Piller RC VII Kdodpfxsghrx Nj Aktjl Motor 11kW DIETZ 5220 1/min

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Kdsdpfoxfrv Eox Aktjl Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Kdjdpfx Ajy Av Rdoktsl Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Kdedpjyl Nntsfx Aktjl

Condition: used, Year of construction: 2006, machine/vehicle number: 20618, Heißfolienprägemaschine / Hot Foil Stamping American Supply HFS Year 2006 - Serial-No. 20618 Prgefläche / Hot Foil Stamping area max. 80 x 150mm Druckleistung / Pressure max. 600Kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kdodpoup Eimsfx Aktjl

Year of construction: 1989, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, radial fan double -Type: 2 E 10 1800 -Engine power: 11 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 62 mm Kodpfxsval Smo Aktedl -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 1150/890/H1280 mm -Weight: 410 kg

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, extraction blower -Manufacturer: Piller, radial fan pressure blower -Motor: ABB Type M2AA90S-2 -Engine power: 1.5 kW / 2870 rpm Kdsdpfx Akevn Nzujtel -Connection input: Ø 115 mm -Connection output: 100 x 60 mm, distributor 2x Ø49 mm / 1x Ø 34 mm -Dimensions: 870/365/H665 mm -Weight: 50 kg

Condition: used, High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower Ksdpechaygsfx Aktodl -Engine power: 0.37 kW -Performance data: not available -Connection input: Ø 65 mm -Connection output: Ø 60 mm -Dimensions: 510/480/H470 mm -Weight: 49 kg

Year of construction: 1972, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, radial fan pressure blower -Type: R08 800 -Engine power: 5.5 kW / 2880 rpm -Volume flow: 12 m³/min -Connection input: Ø 140 mm -Connection output: Ø 75 mm -Protection class: -Dimensions: 1290/470/H1040 mm -Weight: 150 kg Kjdpevcyw Nsfx Aktedl

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period. Kedox U Tgmepfx Aktsdl

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: PILLER/MWM Kedjivql Iepfx Aktjdl -Power: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without controls -Individual components: see photos -Transport dimensions: 6 loading meters -Total weight: 8600 kg

Year of construction: 1996, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Kjdpfx Akjvam Hlstjdl -Manufacturer: Piller, double radial fan. -Type: 2 M 10 1800 -Engine power: 15 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 160 mm -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 900/1150/H1275 mm -Weight: 367 kg

Condition: as good as new (ex-display), Piller Apotrans II 200A-4 pol. Static-Transfer-Switch Kedjigl N Espfx Aktjdl

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Kdsdew U N Daspfx Aktol

Year of construction: 1998, condition: used, functionality: fully functional, (USED) General Cargo Container in Steel, approximate measurements 12 m long x 2.30 m wide x 2.30 m high, Year 1998. Please Inspect. DOES NOT INCLUDE CONTENTS, DELIVERY WILL BE MADE WHEN THE CONTAINER IS EMPTY Kodpfxsy Sirgj Aktjdl (USADO) Contenedor de carga General en Acero, medidas aproximadas 12 m de longitud x 2.30 m de ancho x 2.30 m de altura, Año 1998. Favor de Inspeccionar. NO INCLUYE CONTENIDOS, LA ENTREGA SE REALIZARÁ AL VACÍAR EL CONTENEDOR

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Kdodpjruakgofx Aktsl Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Kdsdpfx Akexaqa Sstol Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Kdsdpfxsxdfaze Aktsl Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Kdedpfx Akjxdfa Ujtsl Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Ksdpfx Asrtrykoktodl Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: new, Year of construction: 2026, machine/vehicle number: YAP92107, fuel type: diesel, motor manufacturer: Caterpillar 3516B, General information Field of application: Construction Weights Empty weight: 14.470 kg Functional Generator capacity: 2.250 kVA Dimensions of cargo space: 593 x 229 x 237 cm CE mark: yes Kjdpfxjy Ttz Us Aktjdl Other information Fuel consumption: 395 Liter per Hour at 90% Load (Prime) Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Production country: DE Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C18A2S400367, fuel type: diesel, motor manufacturer: Caterpillar C18, General information Field of application: Construction Weights Empty weight: 5.952 kg Functional Generator capacity: 715 kVA Dimensions of cargo space: 532 x 192 x 229 cm CE mark: yes Other information Fuel consumption: 73,5 Liter/Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1082 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy Kjdjy Ttpfjpfx Aktjdl - Tank

Condition: like new (used), Year of construction: 2011, operating hours: 370 h, functionality: fully functional, continuous power (apparent): 500 kVA, rotational speed (max.): 1,500 rpm, Tecno-Gen diesel generator powered by an FTP IVECO CUSOR 13 diesel engine. Coupled to a Brushless MeccAlte alternator. Power: 417/500 kVA, 400 volts, 50 Hz, 1500 rpm. Equipped with a tropicalized, water-cooled radiator mounted on the engine. All components are housed in a soundproof and waterproof enclosure. Kedpfx Akoy Tqblotjdl Control panel and day tank are integrated. Built in 2011, with only 370 operating hours. This emergency backup generator set, which has been very well maintained and is in excellent condition, is now available.