Used Pim Bulgaria Fermenter With An Electrical Stir for sale (43,486)

Condition: used, Year of construction: 2004, functionality: fully functional, total height: 5,000 mm, total width: 3,100 mm, Grape fermenter with a capacity of 15 cubic meters (15 000 liters), in very good condition. It has a water jacket and an agitator with an electric motor. There are 4 units available, the price is for one piece. If you purchase more than one unit, price can be negotiated. TECHNICAL DATA: Volume: 15 m³ (15000 liters); Type: Vertical; Material: Stainless steel, food grade; Diameter: 3100 mm; Height of the body with legs: 5000 mm; Year of production: 2004; Manufacturer: PIM-Haskovo With electric motor and agitator, Power: 4.1 kW, Electrical supply: 380/220V, 50Hz, IP54 protection Built-in thermostat and temperature control panel with a water jacket. Godpfoy It Ukjx Afusbu

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Gedpfjyyygkjx Afujbu Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. Gbedpfx Afjxhfl Eouou This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Gbedpoxhfqnjfx Afueu Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: used, This listing is for the Hanna HI190M Magnetic Stirrer The unit is in full working condition and is ready for immediate use The Hanna HI190M is a compact and durable magnetic stirrer designed for efficient mixing in constrained lab spaces. Key Features Compact & Lightweight Design The device measures approximately 120 × 120 × 45 mm (4.8 × 4.8 × 1.8 in) and weighs between 610 g (12 V DC version) and 640 g (115 V version) Its small footprint helps free up valuable bench space Speedsafe™ Safety Mechanism This smart system prevents dangerous overspeed when the stir bar is suddenly removed, using an opto-sensor and a frequency-voltage converter to monitor and limit speed Adjustable Speed Range Offers stirring speeds from 100 to 1000 RPM, providing precise control over mixing Gsdpfsxv Dvxsx Afuobu Durable Housing The ABS plastic casing resists many chemical spills, enhancing longevity and safety Power Indicator LED A handy LED lets you know at a glance that the unit is powered on and operating Fuse & Grounding Protection The 115 V and 230 V versions include a replaceable fuse for short-circuit protection, and the case is grounded for additional safety

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 700013, Manufacturer: PIM Ltd., Bulgaria Machine Type: Milk Homogenizer Serial Number: 7008.013 Capacity: 5000 L/h Gbodsyxayuspfx Afusu Year of Manufacture: 2019 Construction: Stainless Steel Application: Milk and dairy product homogenization Certification: CE Marked

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3029098, total width: 1,100 mm, total length: 2,500 mm, total height: 2,000 mm, Equipment: type plate available, Manufacturer: PIM Ltd. Country: Bulgaria Machine type: Cheese formation machine Capacity: 600 kg/h Year: 2019 Serial number: 3029.098 Material: Stainless steel Application: Dairy processing / cheese production Applications Suitable for: White cheese production Feta type cheese Dairy processing plants Cheese forming and molding Gjdpfxsyxkpge Afuobu

Condition: used, mileage: 807,000 km, power: 338 kW (459.55 HP), first registration: 07/2005, fuel type: diesel, axle configuration: 6x4, wheelbase: 4,580 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, total length: 81,000 mm, total width: 2,550 mm, Year of construction: 2005, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, = Additional Options and Accessories = - Leaf spring suspension - Power take-off (PTO) - Radio/CD player - Sleeper cab - Sun visor = Additional Information = Front axle: Steerable Number of cylinders: 6 Engine displacement: 12,130 cc Unladen weight: 14,080 kg Payload: 11,920 kg Gross vehicle weight (GVW): 26,000 kg Crane: Palfinger / Epsilon SRX 47, year of manufacture 2004 Damage: None Gsdpjzvclxjfx Afuebu

Condition: used, Year of construction: 2021, Bystronic BySmart Fiber 10kW Fiber Laser Cutting Machine (2021) Well-maintained Bystronic BySmart Fiber 10kW laser cutting machine available for sale. The machine was manufactured in 2021 and has only 3,900 cutting hours with approximately 12,000 operating hours. The machine is currently in production and can be inspected under power by appointment. Gjdpfx Aezzbx Uofusbu The BySmart Fiber series combines high productivity, precision cutting quality and user-friendly operation, making it suitable for a wide range of sheet metal processing applications. Manufacturer: Bystronic Model: BySmart Fiber 10kW Year of Manufacture: 2021 Laser Source: Fiber Laser Laser Power: 10 kW Operating Hours: 12,000 h Cutting Hours: 3,900 h Power Supply: 3 x 400V / 50Hz Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Bystronic Model: BySmart Fiber 10kW Year of Manufacture: 2021 Cutting Hours: 3,900 h Laser Power: 10 kW Operating Hours: 12,000 h Laser Source: Fiber Laser

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992, OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Gsdpfx Afoy Emnxeuobu

Condition: used, mileage: 807,000 km, power: 338 kW (459.55 HP), first registration: 07/2005, fuel type: diesel, tire size: 385/65 r 22.5, axle configuration: 6x4, wheelbase: 4,580 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 81,000 mm, total width: 2,550 mm, Year of construction: 2005, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, parking heater, = Additional Options and Accessories = - Leaf spring suspension - Power Take-Off (PTO) - Radio/CD player - Sleeper cab - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,130 cc Axle Configuration Suspension: Leaf spring suspension Front axle: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 1: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inside: 75%; Tire tread depth left outside: 75%; Tire tread depth right inside: 75%; Tire tread depth right outside: 75%; Reduction: single reduction Rear axle 2: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inside: 75%; Tire tread depth left outside: 75%; Tire tread depth right inside: 75%; Tire tread depth right outside: 75%; Reduction: single reduction Weights Unladen weight: 14,080 kg Payload: 11,920 kg GVWR: 26,000 kg Gbodpezvcvksfx Afuou Functional Crane: Palfinger / Epsilon SRX 47, year of manufacture 2004 Condition Damage: none

Condition: used, Year of construction: 2018, REF: MM6441 Gbjdpfx Aoza T Sljfusu Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Gbodpfoza U Nfox Afusu Bending Length 4250 mm

Condition: used, Year of construction: 2022, Excellent ByStar 4020 fiber laser with 15kW laser output and ByTrans Extented automation. Including nozzle changer, Mixgas and outdoor version of dust extraction. Viewing possible upon appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Working dimensions: 4000 x 2000 mm Gbodsy Erfvjpfx Afuou Laser output: 15000W Automation: ByTrans Extended Power on hours: 5734h Cutting hours: 1570h

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph = Additional options and accessories = - Originally painted - Tool box = Remarks = BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. Gbsdpfx Afex D A R Dsueu • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 Gjdpezuygqofx Afuobu • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB6700-300/2.7 IRC5, load capacity: 300 kg, arm reach: 2,700 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Gbedewqqtvjpfx Afueu Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Excellent basic condition. This robot will be professionally cleaned but not repainted. Brand: ABB Type: IRB6700-300/2.7 Controller: IRC5 Payload: 300 kg Reach: 2.7 m Comes with an ABB Lean ID (see document): The IRB 6700 LeanID ensures flexible operation and minimizes downtime (due to cable wear), providing better process efficiency and reducing manual handling. In short, IRB 6700 LeanID delivers a strong return on investment. Optional: We can deliver the robot with an ABB IRBTx004 track (up to 32 meters if needed). Complete with the 7th axis drive unit installed in the robot controller, motor, cable chain, grease pump, fully functional and operational. About: Our daily, reliable business is the delivery of refurbished A-brand robots: ABB, KUKA, FANUC, and YASKAWA. Established in 2002. We ship worldwide.

Condition: good (used), functionality: fully functional, Year of construction: 2008, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Gbsdpfx Afsz Dumzeusu Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc. Gbjdpfoz N R U Hjx Afueu

Year of construction: 2018, condition: used, Multivac R270CD with skin pack and MAP pack. Overhauled in 2018, this machine came out of production week 37 2024. Machine comes with several moulds, spares and with 3 vacuum pumps incl. - Booster pump - Busch R5 360m3/h - Busch R5 100m3/h Only 668 production hours, everything build in. Good to go for production. Dimensions from all the tooling is in the photo album Gbedpfx Aeuk Sp Njfusu

Condition: used, IKA EURO ST-D with 2 Paddles and H-Stand Reliable IKA EURO ST-D overhead stirrer, offered complete with 2 stirring paddles and an H-stand. Ideal for laboratory mixing applications that require stable and consistent stirring performance. The unit is supplied with all the essential accessories needed for immediate use. Included: IKA EURO ST-D overhead stirrer 2 stirring paddles Gedpfszh Rhrjx Afujbu H-stand Suitable for: General laboratory mixing Research and development Chemical and pharmaceutical lab work Condition: Used Availability: Ready for immediate delivery

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) Gsdpfx Afoxb U Txsujbu 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: ready for operation (used), Year of construction: 1983, Offset printing machine ULTRAMAN VII AGS/1983 Maximum sheet size 1120x1600 mm Minimum sheet size 600x800 mm Printing on 5 color groups + 1 dispersion varnish group IR drying alcohol dampening and cooling Quick action plate clamps Gbedpfx Afsy U Ufdeueu The machine is in good working condition.

Condition: reconditioned (used), functionality: fully functional, Spiralmixer Diosna SPV 240 AF with 2 bowls - 240kg dough, - after recondition With Diosna bowl lift Gbsdpfxex H Tr He Afuju

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Godpfxszdnpxe Afuebu Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).