Used Point-Rolling Machine for sale (71,982)

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Wire diameter range: up to 500 N/mm² 22 - 7,0 mm up to 1.000 N/mm² 21 - 8,0 mm Pjdpjyak Eiofx Afuora over 1.000 N/mm² 20 - 8,0 mm Number of kalibers: 10

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, Wire diameter range: 16 - 5,0 mm Number of kalibers: 10 Prjdpfxeyc Hpvo Afusa

Year of construction: 1991, condition: ready for operation (used), A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible. Psdpfx Afjyvuu Uousra

Condition: used, Thread rolling machine UPWS 25. Prjdpfx Afszd Rf Neuoa

Condition: used, Year of construction: 1981, thread length: 100 mm, overall weight: 4,310 kg, screw diameter: 12 mm, production capacity: 260 unit/h, Equipped with Vibratory Bowl & Stand Pedpfx Afozt Tc Nsuera

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES Podpofgl Aqefx Afuora WITH 5 TONES OF TOOLS MADE IN ITALY

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, paper width (max.): 1,800 mm, Unwind diameter: 1,000 mm Rewind diameter: 800 mm Max. speed: 400 m/min Friction shafts for 3 and 6 inch Hydraulic lift at the unwind station Splicing table Web edge control Tidland knife holders, 20 pieces Semi-automatic knife setting system from Tidland Recipe management Prjdsywl D Nepfx Afuoa Laser positioning We will also dismantle and load the machine onto a truck or sea container at our own expense.

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2022, We are offering this used KÖNIG ECO TWIN roll production line, manufactured in 2007. Model: ECO TWIN Type: 800-(DB800)-K6-SCHN6/B-(DA) Serial number: 07.0.0782 Year of manufacture: 2007 Power: 8 kW Frequency: 50 Hz Rated voltage: 3 × 400 + N V Rated current: 15 A The system has been fitted with new belts and is in perfect, fully functional condition. Prsdpfx Afoznm S Hsusa It was used by us solely as a backup system and was therefore only used very rarely. We acquired and overhauled the system approximately two years ago. The system is immediately available and can be collected directly after arrangement. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Podpfx Aey Tbf Iofuera Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Psdpfsxwqdrjx Afusra

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Machinetype: thread rolling machine - flat die Prjdpfxjwi Tc Rj Afuea Info: vibratory feeder Make: HILGELAND Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm output pieces/min: 100 Location: In our warehouse

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I Pedpfow Edmfsx Afujra 6/5 row Range: 33 - 95 grams Year of construction: 2011 Very well maintained Diagrams available + Hopper with oil system + Spreading belts Please note: the power unit is missing. (New price of the power unit approx. €10,000) However, it is possible to connect this Rex directly to a proofer that does have a power unit. Transport can be arranged. Inspection possible on-site. Price: €35,000,- EXW If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: used, Year of construction: 1963, total length: 2,000 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 1.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: H2111 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1550 - Transport dimensions: 2000mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Prodpezhw Dtjfx Afuea VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs Pjdpfxjw Hpzwj Afujra

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts Podjzwuu Uspfx Afuora 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE Certified Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC Control Panel Reference F24 €9,500 (including transport) Pjdpjzb Imasfx Afusra

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 10842, We are offering this pre-owned sheet metal rolling machine Chr. Häusler VRM-hy 3000x15, year of manufacture 1992. Prjdpfx Afox Sqc Tsuoa Model: VRM-hy 3000×15 Serial number: WO 10842 Year of manufacture: 1992 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 1980, 2500 mm x 340 Ømm top roller Rolling capacity: 2500 x 23 mm (5 x top roller diameter) Podpoyz Acwefx Afusra Max. sheet thickness: 2500 x 15 mm Equipped with top crane and side support

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 10 h, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, roller diameter: 130 mm, roller length: 2,050 mm, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 1,500 kg, total length: 3,200 mm, total width: 750 mm, total height: 1,000 mm, power: 2.2 kW (2.99 HP), Equipment: cone bending device, foot remote control, swiveling upper roller, For sale is a high-quality 3-roller sheet metal rolling machine, Sahinler IRM 2050 x 130, with an electric drive. The machine was only purchased for one project and has approximately 10 operating hours. Technically and visually, it is in almost new condition. Particularly practical: The machine is equipped with heavy-duty rollers, making it mobile and allowing for flexible movement within the workshop. Technical data: Manufacturer: Sahinler Type: IRM 2050 x 130 Year of manufacture: 2022 Operating hours: approx. 10 h Usable sheet metal length: 2,050 mm Maximum sheet metal thickness: 3 mm Roller diameter: 130 mm Drive power: 2.2 kW Weight: approx. 1,500 kg Dimensions (L x W x H): 3,200 x 750 x 1,000 mm Podpfx Aszdnfmsfuera Equipment: 3-roller design Asymmetrical roller arrangement with pre-bending function 2 driven rollers with brake motor Swiveling top roller forward Forward and reverse operation Conical rounding by tilting the rear roller Mobile control panel Mobile thanks to retrofitted heavy-duty rollers The machine is ready for immediate use and can be inspected by arrangement. If you are interested or have any questions, please do not hesitate to contact me.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Biko 3128 – Plate Rolling Machine (2011) High-quality 3-roll plate bending machine for professional metal fabrication. Well maintained and ready for work. Technical Specifications Model: Biko 3128 Year of manufacture: 2011 Rolling type: 3-roll, initial pinch Max. plate width: 3100 mm Max. bending capacity: 28 mm (depending on material grade) Top roll diameter: To be confirmed Side roll diameter: To be confirmed Motor power: To be confirmed Control system: Hydraulic, with adjustable side rolls Cone bending capability: Yes Machine construction: Heavy-duty welded frame Safety: Emergency stop & foot pedal control Condition Machine is in very good working condition Regular service history Test run possible Included Prjdpfx Afex Dx Hzeuoa Foot pedal Hydraulic adjustments Dimensions & Weight (Confirm exact values with seller) Length: 5.0 m Width: 1.8 m Height: 1.6 m Weight: 12,000 kg

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Podopwbvkopfx Afujra

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, – Capacity 1050 × 1.8 mm – Bending capacity 1050 × 1.5 mm – Roll diameter 70 mm – Minimum bending diameter 105 mm – Conical rolling – Swing-out upper roll – Brake motor Prodpfxeyrn Ixe Afusa – Foot control – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t Psdpfx Afeztfxisujra

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, number of digital displays: 1, Equipment: cone bending device, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1050 x 1.8 mm Pedpfxsyp E Sij Afujra – Bending capacity 1050 x 1.5 mm – Roll diameter 70 mm – Electrically adjustable rear roll – Digital display – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Foot control – Emergency stop – Documentation – 400V

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, *Description:* For sale: motorized 3-roll bending machine, brand *SAY-MAK*, model *SIR 1270 x 68*. *Specifications:* - *Year*: 2019 - Serial No.: 6375291 - *Usable width*: 1270 mm - *Steel capacity*: 1.2 mm / Stainless steel 0.8 mm - *Minimum diameter*: 68 mm Prjdpfxszr Rdhj Afuoa - *Motorized*: Yes, with foot pedal for forward/reverse operation - *Electrical cabinet*: 380V Three-phase - 0.75 kW - Emergency stop - *Weight*: 350 kg - *Condition*: Very good condition, 2019 machine Ideal for sheet metal work, ventilation, zinc work, and stainless steel applications. Compact and precise machine. Robust Turkish brand, spare parts available.