Used Pointer 380 Sl for sale (7,076)

Condition: good (used), three-jaw chuck diameter: 380 mm, through hole: 100 mm, Metal cutting Tooling Hsdszdii Iopfx Aqgofn POINTER - 380 SL MACH-ID 2995 Make: POINTER Type: 380 SL Diameter: 380mm 3 Chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: Hfedpfjzgcy Djx Aqgen ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, SmartLift SL-380 Indoor. Used, in good working condition. Hjdezz Spwopfx Aqgofn

Condition: excellent (used), For sale: an industrial submersible pump with a 7.5 kW three-phase motor, equipped with a power cable with a power plug and a flanged discharge connection. Data read from the nameplate: Motor power: 7.5 kW Supply voltage: 380 V Rated current: 17 A Rotational speed: 2850 rpm Performance range: 0–160 m³/h Hodpfx Aoz Sphmjqgofn Head range: 35–0 m Power factor cos φ: 0.92 Insulation class: F Serial number: 8353767 The maximum flow rate and maximum head refer to different operating points of the pump. Equipment and construction: Metal housing. Lower suction basket. Base for vertical positioning. Lifting eye. Flanged discharge connection. Power cable with power plug. Condition: used, visible signs of wear, scratches, and corrosion on the discharge connection. The visual condition is shown in the photos.

Condition: used, mileage: 120,000 km, first registration: 10/1984, fuel type: gasoline, color: grey, gearing type: automatic, number of seats: 2, Equipment: ABS, air conditioning, central locking, Mercedes Benz 380 SL/Cabrio EX USA vehicle Newly restored New fenders/trunk lid etc.. Hfedpfoudgm Iex Aqgjn Alloy wheels Air condition Hardtop etc.....

Condition: excellent (used), Otto Hohner FAVORIT carton stapler 380 V year 1980 Hjdpoz Sndfofx Aqgsfn

Condition: excellent (used), For sale: robust BT2 bench drill of industrial manufacture – a classic, very durable design from the era of the former GDR (East Germany). ✅ Condition: ✔️ Used ✔️ Fully operational ✔️ Shows normal signs of use (scuffs, scratches – visible in the photos) ✔️ Complete machine 🔩 Technical specifications: Model: BT2 Power supply: 380V / 3 phase / 50 Hz Power: approx. 1.1 kW Manufacturer: VEB Werkzeugmaschinenfabrik Saalfeld (GDR) Weight: approx. 180 kg Speed adjustment + manual feed ⚙️ Features: Hodpfxsz Smpms Aqgofn Very robust, heavy construction Stable operation – ideal for workshop and production use Easy to operate and service Exceptionally durable "workhorse" machine 📦 Included: ✔️ BT2 bench drill ✔️ Worktable ✔️ Drill chuck 🌍 Country of origin: 🇩🇪 Germany (East Germany) ℹ️ Additional information: On-site inspection available Perfect for workshop, metalworking, or production Transport possible (pallet / shipment)

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Hedpfxjz Sznce Aqgofn Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: good (used), machine/vehicle number: 0159, Year of construction: 2017, Cummins QSL9 380 from Uniktruck Hfsdpfx Aqeyuhf Aegen

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 unit of Flexor 380 2C, used, factory-reconditioned Machine speed max. 300 m/min Hjdpfx Aqsz Sriqegjfn Web width max. 380 mm Web width min. 190 mm Unwind diameter max. 800 mm Unwind shaft, pneumatic, D 76 mm Punching unit with re-register – 2 units Punching width max. 380 mm Magnetic cylinder, circumference min. 10” (80T) Magnetic cylinder, circumference max. 24” (192T) Matrix strip unwinding, max. D 600 mm Slitting unit with 7 blade holders 1 Rewinder, max. D 550 mm Spindle, D 76 mm Year of manufacture 2015 Accessories (optional): Used magnetic cylinders: 80, 87, 92, 94, 95, 98, 96, 100, 102, 104, 106, 112, 116, 120, 132, 136, 138

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “GMP Qtopic-380 Auto” laminating machine Item for Sale: 1 x GMP Qtopic-380 Auto We can easily configure the machine to meet your specific needs. Please feel free to contact us! Condition: This listing is for a used machine, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order Packaging and Shipping: Hfedozmtkmjpfx Aqgjn You are welcome to view the unit during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2006, Ref:11130 . 2006 Perfecta SL-10P Pile Lift Comprising; Perfecta SL-10P Mobile pile lift with steel plate. Keeps pile at a constant height, electronic eye for automatic lifting/ lowering. Casters for mobility. Swinging control panel for left or right side use Lowering safety device, 1,5 kVA - 380 V. Lifting capacity 1000 kg, maximum size 90 x 130 cm. Specification: Maximum Paper Size: 76 × 109 cm to 110 × 165 cm Hfedpfozmycpox Aqgen (depending on the exact sub-variant). Stack Height Capacity: Up to 160 mm Power requirements : 3pH, 380-415V, 1.5kW.

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Hfedpszx Ehzjfx Aqgjn Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Please get in touch for more information or additional photos.

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, Flexor 380B Mono Hfsdpfxjz Ag Nbo Aqgon Film and paper cutting machine Material web width: 380 mm Unwinding diameter: 800 mm Rewinding diameter: 1 x 500 mm Standard rewinding shaft diameter: 76 mm Machine will be factory-inspected, 3 months warranty.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Hfedpfx Ajzyc Rieqgjn The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Hsdpfx Aqji Rixksgefn Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: excellent (used), Year of construction: 2015, operating hours: 1,600 h, input voltage: 400 V, input frequency: 50 Hz, We are offering this used Plank R-380 deburring machine, manufactured in 2015, for sale. Drum length: approx. 650 mm Drum diameter: approx. 480 mm Drum volume: approx. 120 liters Machine type: R-380 Machine serial number: 404 Hfodpfx Aoz I S D Esqgon Year of manufacture: 2015 Rated voltage: 400 V Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), A robust industrial sewing machine from the renowned German brand Dürkopp, model 560-38. Designed for sewing leather, leather goods, upholstery, belts, bags, suitcases, and other heavier materials. The machine is mounted on a sturdy work table and equipped with a Consew clutch motor. Technical specifications: Manufacturer: Dürkopp Model: 560-38 Power supply: 380 V Motor: Consew MT-M2 Motor power: 0.37 kW (1/2 HP) Motor speed: 1425 rpm Clutch drive Work table included Intended use: leather, upholstery, technical materials Condition: Hfsdpfsz Sm Snjx Aqgsn Used machine. Visual condition as shown in the pictures.

Condition: excellent (used), For sale: industrial KSB centrifugal pump, type EB 32-160, equipped with a 4 kW electric motor. Pump data: Hfodpfx Aez Snt Hjqgon • Manufacturer: KSB – Klein, Schanzlin & Becker AG • Type/model: EB 32-160 • Pump number: Motor data: • Motor number: 3358128- • Motor type: AF 112M/2A-11 • Power: 4 kW • Voltage: 380 V • Rotational speed: 2870 rpm • Current: 8.1 A • Frequency: 50 Hz • Protection class: IP54 • cos φ: 0.89 The pump and motor were likely refurbished and inspected by a specialized service provider in 2024, as indicated by the stickers from Elektromotoren Reparaturwerk ROCK and the inspection marking from 2024. We have inspected the pump and it is in working order. Used condition. The exact condition of the device is shown in the pictures.

Condition: used, Year of construction: 2017, operating hours: 15,186 h, Equipment: documentation/manual, We are offering this used INDEX ABC 65 SL CNC lathe, manufactured in 2017. Machine type: ABC Year of manufacture: 2017 Operating hours (hydraulics): 15,186 Hfjdpfxjz Ri Ibe Aqgjn Turret 1 with 7 stations, VDI 25, and W-gearing Synchronous spindle with chuck or collet possible! Turret 2 with 6 stations and dovetail mounting Powered tools on turret 2 Ejection blowing device Transmit function – Teleservice Three rear boring spindles for fixed tools Magazine above the main spindle Conveyor belt Chip conveyor, hinged belt – workpiece removal device – workpiece feed unit INDEX LMI bar feeder magazines If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,400 W, overall weight: 6,804 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS SL-30THE was manufactured in 2007. It features a maximum swing over the front cover of 762 mm and a maximum cutting diameter of 432 mm. The machine offers a cutting length of 864 mm and a spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30THE horizontal turning machine we have for sale. Contact us for further details. • Max swing over front cover: 762 mm • Max swing over cross slide: 381 mm • Max cutting diameter: 432 mm • Max cutting length: 864 mm • Spindle bore: 88.9 mm • Max torque: 407 Nm @ 700 rpm • Spindle nose (standard): A2-6 • X-axis rapid feed: 18.0 m/min • Z-axis rapid feed: 18.0 m/min Hedsz I Ryfepfx Aqgsfn • Number of tool stations: 12 • Outside/inside turning tool size: 25 mm • Bore size for turning tools: 50 mm • Tool change time (adjacent tool): 1 s • Tool change time (opposite tool): 3 s • Electrical supply / power requirement: 28 kVA • Voltage: 380 V, 3-phase • Air requirement: 113 l/min @ 6.9 bar • Coolant tank capacity: 189 l Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Hfjdpfx Aqszfv T Iogen Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: PERKINS 6-CYLINDER WITH TURBO (4-STROKE DIRECT INJECTION) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM STEPLESSLY ADJUSTABLE FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER Hedjz Sdvwopfx Aqgofn TRANSPORT LENGTH: 10 METERS TRANSPORT HEIGHT: 3.85 METERS UNLADEN WEIGHT: APPROX. 8500 KG HEATING AIR CONDITIONING (COMPRESSOR MISSING) 3D LEVELING SYSTEM HYDROSTATIC TRANSMISSION WITHOUT CUTTING UNIT WAGON THE HEADER DRIVE HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing solutions tailored to your needs: with or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer registration plates: Provision of export or short-term registration plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp: Staff on-site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt

Year of construction: 2024, condition: new, functionality: fully functional, TECHNICAL DATA • Designed for technical moulding applications (sprues and runners). • Slow rotor speed (25 RPM). • Four standard models. • High intensity magnetic trap, integral to the feed hopper, to ensure no metal parts reach the cutting chamber. • Quick opening and easy cleaning. • Anti-stress shaft rotation transmission. • Double-bearing shaft configuration. The quietest of all The SL granulators are equipped with sound insulated feeding hoppers. The noise produced by the grinding process is fully dissipated, so to obtain noise levels well below those industrially acceptable (EN12012-1). All hoppers are equipped with sight glass for visual inspection of the grinding operations. Hedpfx Asz Sqd Hsqgsfn Ease of maintenance and accessibility The entire SL unit can be accessed, cleaned and put back into operation in a matter of minutes. All parts are accessible with no need for tools and can be cleaned by vacuum. Also, all SL models are designed to be accessible from one side and do not require to be moved away from the injection moulding machine to perform maintenance or cleaning. Equipment developed for Industry 4.0 CMG provides technologies and solutions designed for the recycling industry, all certified for Industry 4.0 compliance. CMG's solutions include granulators, shredders, integral conveyor belts, regrind evacuation and conveying systems, dedusting, dust management and air filtration. CMG's installed base is considerable: over 45,000 units supplied to its customers in the company's 46 years of activity.

Condition: good (used), Year of construction: 2007, Turning diameter 330 mm Hjdpfx Asz Stgqjqgsfn Turning length 508 mm Spindle speed 3,400 rpm Tool holder VDI 40 Distance between centers 610 mm Turning diameter over the bed 585 mm Turning diameter over the cross slide 241 mm Travel - x 214.6 mm Travel - z 508 mm Bar diameter 63 mm Total power consumption 15 kW Machine weight approx. 4,100 kg Total power consumption 15 kW Dimensions 2800 x 1800 x 1800 mm Equipment: - Bar feeder 1.5 m Servo Bar 300 - 3-jaw chuck - Collet chuck - Tailstock - Various holders