Used Positive Saddle-Mounted Monoblock Unit for sale (54,159)

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser Lhjdpfxjxvr T Eo Amzsn - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: new, Wall-mounted swivel jib crane ASSISTENT with electric hoist and trolley, load capacity 125 kg, outreach 4000 mm, swivel range 180 degrees, VETTER Cranes. · without electric chain hoist · overhead boom for optimal utilization of the entire room height · design according to EC Machinery Directive, certified Main lift: 8 m/min Swivel range: 180° Horizontal force: 13 kN Overall height B: 940 mm Fine lift: 2 m/min Lift height H: 5000 mm Outreach A: 4000 mm Lhjdpfx Amo Aci Eiezjn Equipment: with electric chain hoist and trolley Vertical force: 3 kN Flange width F: 91 mm Load capacity: 125 kg

Condition: new, Wall-mounted swing jib crane ASSISTENT with electric hoist and trolley system, lifting capacity 500 kg, reach 3000 mm, swivel range 180 degrees, VETTER Cranes. · without electric chain hoist Lhedpfxj Aci Hao Amzjn · top-mounted jib for optimal utilization of the entire room height · design according to EC Machinery Directive, registered Swivel range: 180° Equipment: with electric chain hoist and trolley system Vertical force: 8 kN Main lifting speed: 4.5 m/min Reach A: 3000 mm Lifting height H: 5000 mm Flange width F: 120 mm Overall height B: 940 mm Horizontal force: 30 kN Fine lifting speed: 1.1 m/min Load capacity: 500 kg

Condition: new, Wall-mounted swing arm crane ASSISTENT with electric hoist and trolley, lifting capacity 250 kg, outreach 5000 mm, swivel range 180 degrees, VETTER Crane Technology · without electric chain hoist · top-mounted boom for optimal utilization of the entire room height · design according to EC Machinery Directive, certified Flange width F: 120 mm Overall height B: 940 mm Horizontal force: 30 kN Outreach A: 5000 mm Fine lifting speed: 1.5 m/min Vertical force: 6 kN Main lifting speed: 6 m/min Swivel range: 180° Lhjdpe Aci E Njfx Amzjn Equipment: with electric chain hoist and trolley Lifting capacity: 250 kg Lifting height H: 5000 mm

Condition: new, Wall-mounted jib crane ASSISTENT with electric hoist and trolley system, lifting capacity 125 kg, outreach 3000 mm, swivel range 180 degrees, VETTER Crane Technology. · Without electric chain hoist · Top-mounted jib for optimal utilization of the entire room height · Design according to EC Machinery Directive, registered Lhodpfx Ao Aci Ecemzon Flange width F: 91 mm Lifting height H: 5000 mm Swivel range: 180° Overall height B: 940 mm Vertical force: 3 kN Main lifting speed: 8 m/min Outreach A: 3000 mm Equipment: with electric chain hoist and trolley system Fine lifting speed: 2 m/min Load capacity: 125 kg Horizontal force: 10 kN

Condition: new, Wall-mounted swivel crane ASSISTENT with electric hoist and trolley system, lifting capacity 250 kg, reach 4000 mm, swivel range 180 degrees, VETTER Cranes. · without electric chain hoist · overhead boom for optimal use of the entire room height · design according to EC Machinery Directive, certified Lhodpfx Amo Aci E Aezon Lifting capacity: 250 kg Lifting height H: 5000 mm Equipment: with electric chain hoist and trolley system Reach A: 4000 mm Horizontal force: 22 kN Main lifting speed: 6 m/min Overall height B: 940 mm Fine lifting speed: 1.5 m/min Vertical force: 5 kN Swivel range: 180° Flange width F: 91 mm

Condition: new, Wall-mounted swivel crane ASSISTENT with electric hoist and trolley system. Lifting capacity 125 kg, outreach 5000 mm, rotation 180 degrees. VETTER Cranes. · without electric chain hoist · top-mounted jib for optimal use of the entire room height · design in accordance with the EC Machinery Directive, registered Lifting height H: 5000 mm Load capacity: 125 kg Overall height B: 940 mm Main lifting speed: 8 m/min Horizontal force: 17 kN Fine lifting speed: 2 m/min Outreach A: 5000 mm Ledpfx Ae Aci Epomzehn Equipment: with electric chain hoist and trolley system Flange width F: 91 mm Swivel range: 180 ° Vertical force: 3 kN

Condition: new, Wall-mounted swing crane ASSISTENT with electric hoist and trolley, lifting capacity 250 kg, outreach 3000 mm, swivel range 180 degrees, VETTER Cranes · Without electric chain hoist · Top-mounted boom for optimal utilization of the entire room height · Design according to EC Machinery Directive, registered Lodpfx As Aci Evomzohn Horizontal force: 16 kN Flange width F: 91 mm Main lifting speed: 6 m/min Vertical force: 4 kN Outreach A: 3000 mm Swivel range: 180 ° Fine lifting speed: 1.5 m/min Equipment: with electric chain hoist and trolley Lifting height H: 5000 mm Overall height B: 940 mm Load capacity: 250 kg

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW Lhjdpfx Amjrkmaaszen - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: new, Wall-mounted slewing crane ASSISTENT with electric hoist and trolley, capacity 500 kg, reach 4000 mm, swivel range 180 degrees, VETTER Cranes. * Without electric chain hoist * Overhead boom for optimal utilization of the entire room height Lodpfx Aj Aci Hgomzehn * Design according to EC Machinery Directive, registered Vertical force: 9 daN Fine movement: 1.1 m/min Lifting height H: 5000 mm Load capacity: 500 kg Equipment: with electric chain hoist and trolley Swivel range: 180° Reach A: 4000 mm Overall height B: 940 mm Main lift: 4.5 m/min Horizontal force: 41 kN Flange width F: 120 mm

Condition: new, Wall-mounted coat rack, W 1000mm, H 1700mm, D 430mm, aluminum silver/black · W 1000 x D 430 x H 1700 mm · Further technical specifications: Color: aluminum silver/black · Clothes hangers: not included · Depth: 430mm Width: 1000 mm Depth: 430 mm Clothes hangers: not included Ljdpfj Abug Aox Amzehn Color: aluminum silver/black Height: 1700 mm

Condition: new, functionality: fully functional, machine/vehicle number: TKG, cooling capacity: 3.5 kW (4.76 HP), overall weight: 40 kg, input voltage: 230 V, warranty duration: 12 months, type of cooling: air, Monoblock air conditioning units (with exhaust hose), original packaging, for sale. The following sizes are available: 2 kW (BTU 7000) for rooms up to 23 m² – €213.00 2.6 kW (BTU 9000) for rooms up to 25 m² – €272.50 3.5 kW (BTU 12000) for rooms up to 35 m² – €390.00 3.5 kW (BTU 12000) for rooms up to 35 m² with WIFI – €451.00 Shipping within Germany per unit: €25.00 Manufacturer: KALORIK Lhedewwrk Ajpfx Amzjn All prices incl. VAT.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1085, Offer 24448 Technical specifications: - Maximum load capacity 5000 kg - Maximum clamping diameter 1800 mm - Faceplate dimensions 1200 x 1200 mm - Continuously adjustable electrical rotation - Right and left rotation - Electric remote control - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW Lhsdpfswfq Nmsx Amzjn - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Technical data: - Dimensional stop with digital display 6000 mm - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping - Pneumatic connection 6 bar Lhjdpfszhamdsx Amzon - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg

Condition: new, Description The PERZL HVZ 150 wood handling grapple is a high-quality grapple without a support frame, specifically designed for front loaders up to 120 hp. It features a double-acting hydraulic connection (hoses are available separately) and has a maximum opening width of 1500 mm. The grapple is made of high-strength fine-grain steel QSTE700 and offers a closing force of 9.5 tons, making it ideal for heavy-duty wood handling operations. With a self-weight of 130 kg and a mounting plate with 4 holes, it is suitable for flange rotators with a 4-hole mounting plate of 140 x 140 mm. The operating pressure is 200 bar. This quality product is manufactured by PERZL in Germany. - With double-acting hydraulic connection, without hoses (hose set available separately) Lodps Ab Ti Njfx Amzohn - Made of high-strength fine-grain steel QSTE700 - Quality product from PERZL, manufactured in Germany - Incl. mounting plate with 4 holes - Grapple supplied loose for front loaders up to: 120 hp Closing force: 9.5 t Smallest diameter: 100 mm Opening width: 1,500 mm Operating pressure: 200 bar

Condition: new, Description The PERZL HVZ 150 heavy-duty wood grapple is ideal for permanent mounting on mini excavators up to 7 tons. It includes a permanently mounted MS03 quick coupler and a 6-ton special rotator, which is mounted between the grapple and the rotator. The rotator has a double-acting hydraulic connection (hoses are available separately). Ljdpfo Ab Tlwsx Amzohn Made of high-strength fine-grain steel QSTE700, this high-quality product from PERZL, manufactured in Germany, impresses with its robust design. The grapple has a self-weight of 130 kg, an opening width of 1,500 mm, an impressive closing force of 9.5 tons, and can be operated with an operating pressure of up to 200 bar. The total weight is approximately 190 kg. - HVZ 150 heavy-duty version for permanent mounting on mini excavators up to 7 tons - Incl. MS03 quick coupler, permanently mounted - Incl. 6-ton special rotator, mounted between grapple and rotator - With double-acting hydraulic connection on the rotator, without hoses (hose set available separately) - Made of high-strength fine-grain steel QSTE700 - High-quality product from PERZL, manufactured in Germany - Total weight approx. 190 kg Closing force: 9.5 t Operating pressure: 200 bar Opening width: 1,500 mm Smallest diameter: 100 mm

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ Lodoxvr Upjpfx Amzjhn - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm - Low and high temperature alarm - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: new, Description The PERZL HVZ 150 timber grab with flange rotor impresses with its robust features and high-quality workmanship. The flange rotor, with a capacity of 4.5 tons, ensures efficient handling and is completely assembled, as well as equipped with two hoses for connection to the grab. Made from high-strength fine-grained steel QSTE700, the grab offers reliable performance. Technical details include its suitability for front loaders up to 120 HP, forestry trailers, and mini-excavators up to 7 tons. With a weight of 130 kg and an opening width of 1,500 mm, the grab achieves an impressive closing force of 9.5 tons. The smallest diameter of 100 mm and an operating pressure of 200 bar complete this high-quality product, which is manufactured in Germany. - With 4.5 t flange rotor - Incl. 2 hoses for connecting rotor to grab Lhodps Ab Tkmjfx Amzen - Pre-assembled on grab - For front loaders up to 120 HP, forestry trailers, and mini-excavators up to 7 t - Made from high-strength fine-grained steel QSTE700 - High-quality product from PERZL, manufactured in Germany Closing force: 9.5 t Opening width: 1,500 mm Operating pressure: 200 bar Smallest diameter: 100 mm

Condition: new, for AMR forestry tool box. Lhodpfxo Adf Rko Amzjn

Condition: new, Description The S2250M 3-point hitch shovel impresses with its practical mechanical tilting mechanism and is made of high-quality 5 mm steel sheet. The tilting angle can be adjusted to over 90°, allowing for flexible handling. It comes standard with mounting bolts for categories 1 and 2, and can optionally be supplied with a tilting and folding tailgate upon request. Ideal for various applications in gardening and landscaping! - Equipped with a practical tilting mechanism (mechanical) - Top-quality shovel made of 5 mm steel sheet Lodpfxe Adfn As Amzshn - Tilting angle: Mechanically tiltable >90° - Mounting bolts for categories 1 and 2 included as standard - Available with a tailgate (tilting and folding) upon request Dimensions (L x H x W cm): 225 x 90 x 60 Width (cm): 225 Load capacity (kg): 904 Capacity (m³): 1.1

Condition: new, Description The S1500M is a high-quality attachment shovel, equipped with a robust Hardox blade and a practical, mechanical tilting mechanism. With a tilting angle of over 90° and a shovel made of 5 mm thick steel plate, it offers maximum efficiency and durability. The shovel features standard attachment pins for categories 1 and 2. Optionally, it can be equipped with a tilting and folding rear flap. Ideal for versatile applications in operation. Lhedpfx Amo Adfl Ijzen - With Hardox blade - With practical tilting mechanism (mechanical) - Top-quality shovel made of mm steel plate - Attachment bolts cat. 1 and 2 standard - Optionally with rear flap (tilting and folding) Dimensions (L x H x W cm): 150 x 90 x 60 Width (cm): 150 Load capacity (kg): 603 Capacity (m³): 0.7

Condition: new, Description Lodpfxs Adfk Rj Amzjhn The S1250M 3-point hitch shovel impresses with its high quality and robust construction made of 5 mm steel sheet. It is equipped with a practical mechanical tilting device that allows a tilting angle of over 90°. Mounting bolts for categories 1 and 2 are included as standard. Upon request, the shovel is also optionally available with a tilting and folding rear flap. Ideal for a wide range of applications in gardening and landscaping. - With practical tilting device (mechanical) - Top-quality shovel made of 5 mm steel sheet - Tilting angle: mechanically tiltable >90° - Mounting bolts cat. 1 and 2 included as standard - Optionally available with rear flap (tilting and folding) Load capacity (kg): 496 Capacity (m³): 0.6 Width (cm): 125 Dimensions (LxHxW cm): 125x90x60

Condition: new, Description The S1000M 3-point hitch bucket impresses with its practical mechanical tilting mechanism and high-quality 5 mm steel plate. With a tilting angle of over 90°, it enables versatile applications. As standard, it is equipped with mounting bolts for categories 1 and 2, and optionally features a tilting and folding tailgate for added convenience. Ideal for professional use. Lhodj Adfkkspfx Amzsn - Equipped with a practical tilting mechanism (mechanical) - Tilting angle: Mechanically tiltable >90° - Top-quality bucket made of 5 mm steel plate - Mounting bolts cat. 1 and 2 included as standard - Optionally available with a tailgate (tilting and folding) Width (cm): 100 Load capacity (kg): 400 Capacity (m³): 0.5 Dimensions (L x H x W cm): 100 x 90 x 60

Condition: new, Description The S1500M 3-point hitch blade impresses with its practical mechanical tilting mechanism and high-quality construction using 5 mm steel sheet. With a tilting angle of over 90°, it is ideally suited for various applications. The mounting bolts for categories 1 and 2 are included as standard. On request, the blade can be equipped with a tilting and folding tailgate. Ideal for efficient work in gardening and landscaping! - With practical tilting mechanism (mechanical) - Top-quality blade made of 5 mm steel sheet - Tilting angle: Mechanically tiltable >90° - Mounting bolts cat. 1 and 2 included as standard - Optional with tailgate (tilting and folding) Lsdpo Adflzofx Amzjhn Capacity (m³): 0.7 Dimensions (LxHxW cm): 150x90x60 Load capacity (kg): 603 Width (cm): 150

Condition: new, Description Lodpe Adfi Tofx Amzehn The S1000H is a high-quality 3-point linkage bucket with a hydraulic tilting mechanism, ideal for use in agriculture and horticulture. With a tilting angle of approximately 55°, it enables precise work. Made of robust 5 mm steel, it guarantees maximum durability. The mounting bolts for categories 1 and 2 are included as standard. Two double-acting hydraulic lines are required for the hydraulic version. On request, the bucket can also be equipped with a tilting and folding rear flap. - With practical tilting mechanism (hydraulic) - Tilting angle: approx. 55° - Top-quality bucket made of 5 mm steel - Mounting bolts Cat. 1 and 2 included as standard - Two double-acting hydraulic lines are required for the hydraulic version - On request, with rear flap (tilting and folding) Capacity (m³): 0.5 Load capacity (kg): 400 Width (cm): 100 Dimensions (LxHxB cm): 100x90x60