Used Post-Type Dowel Drill for sale (42,655)

Condition: used, Anvil-type drill bits in mint condition, unused and second-hand, as shown in the examples. Lsdpfx Agszrybistehk Technical data: - Length: Various - Diameter: Various - Shaft: mainly 10 mm - Weight: 4.7 kg

Condition: used, Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: - Working width: 720 mm - Max. clearance: 820 mm - Drilling depth, vertical: 45 mm Lhedpfszryr Ujx Agtsk - Drilling depth, horizontal: 120 mm

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ljdsxwaz Hepfx Agtehk

Condition: reconditioned (used), Year of construction: 2003, Drilling machine for Newel Posts. Without adjusting the machine your can drill 2 Newel Posts for mounting one Newel Post up on the other with dowel connection. The renovation of the machine is still going on. Lhsdpfx Aog U U D Rsgtek

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm - 1.5 kW motor with 2,800 rpm Ledszk N Dwopfx Agtjhk - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Radial drilling machine REFORM, type RB 50-16 Lhodszupamepfx Agtok Year of manufacture: 2002 Drilling capacity in steel: max. 50 mm Tool holder: MK 5 Nominal overhang: 1600 mm Maximum overhang of the spindle to the column: 1600 mm Maximum overhang of the spindle to the column base: 1500 mm Minimum overhang of the spindle to the column: 340 mm Minimum overhang of the spindle to the column base: 240 mm Travel of the drilling head: 1260 mm Height adjustment of the arm: 600 mm Distance between clamping surface and drilling quill: max. 1100 mm Spindle speed: 25-2000 rpm Quill stroke: 300 mm Quill diameter: 80 mm Feed rate: 0.04 to 3.2 mm/rev (16 steps) Clamping surface of the base plate: 1750 x 980 mm (1650 x 840 mm) Column diameter: 350 mm Motor power, spindle drive: 4 kW Mains connection: 400 volts, 50 Hz - Spindle speed controlled via 16 gear stages with speed preselection and hydraulic gear shifting - Right and left rotation of the drilling spindle - Automatic feed via 16 gear stages with feed rate preselection and hydraulic gear shifting - Electro-mechanical height adjustment of the arm, with hydro-mechanical arm clamping - Hydro-mechanical central clamping of the head and column via push buttons - Coolant system in the machine base Machine height with drilling head at the top: max. 2840 mm Space requirement L x W x H: 2400 x 1000 x 2650 mm Weight: 3.5 tons Good condition

Condition: good (used), Alzmetall AC 32 Turret Twin-Head Gang Drill Lhedpfx Ajznic Ujgtjk An extremely robust and rare twin-head gang drill based on two Alzmetall AC 32 drilling units. This system is a high-quality industrial machine designed for highly efficient serial or progressive machining operations. Instead of standard spindles, this machine is equipped with two separate tool turrets. This enables fully automated machining cycles (e.g., centering, drilling, countersinking, tapping) without the need for manual tool changes. Technical Data & Equipment (per head / entire system): Drilling unit manufacturer: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Tapping capacity: max. M 24 / M 30 Tool changer: 2x swiveling multi-station turret heads Machine table: Solid, ground cast-iron table with T-slots for flexible setup Safety: Full enclosure of the working area (safety cabin) with viewing windows for optimal protection against chips and coolant spray Additional features: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy height adjustment of the entire crossbeam You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Scheer DB 5 dowel hole drilling machine for the precise and rapid drilling of dowel holes (horizontal and vertical) in solid timber and board materials. The machine is ideal for mass production in furniture manufacturing as well as for precise joints in interior fit-out work. Includes a comprehensive range of dowel bits. Ljdpfsztvx Tsx Agtohk Technical data: - Drilling spindles: 21 - Pitch: 32 mm - Passage width: max. 1,000 mm - Swivel mechanism: pneumatic - Fax: , Mobile: , Machine No. 208695, Jan 2011, Cost price €1,000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, purchase price €500

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Lsdpfx Aoxnlfljgtohk

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. For Sale with Jet Machinery Ltd Lhodpozuxp Rjfx Agtok Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 units Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Tools: Yes, in mm Drilling direction: from below and from the front Swiveling: Manually Swiveling angle: only 0° or 90° Max. pass-through height: 80 mm Lodeihghrepfx Agtjhk Max. pass-through width: 750 mm Number of material clamps: 3 units Type of material clamping: pneumatic Design: Stationary Stop system: only for this series Weight approx.: 400 kg Motor power: 1.5 kW Dust extraction diameter: 120 mm Location: Customer

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Lhjdpezlbqfofx Agtjk Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Ljdovyurcopfx Agtohk Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Technical data: - Spindle mount: MK 2 - Rated power: 750 W // 400 V // 50 Hz Lhjdpfx Agjzrytlotjk

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Drive: 1.5 / 2.0 kW -Drill speed: 2200/4400 rpm Lhodpfx Ajcuh D Rjgtsk -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm -Height adjustment: max. Mm -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg

Condition: used, Portas BEV electro-pneumatic pot-and-tongue drilling machine for drilling pot-and-tongue joints or fittings Technical data: - Table top: approx. 300 x 37 cm - Weight: 180 kg Ledpozrytrofx Agtehk

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. Lhjdpfezn Ah Rex Agtjk - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 1984 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm Lsdozk Nuvspfx Agtohk with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight: 420 kg Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Ljdjzlbrvopfx Agtshk Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm Ljdpovwgagofx Agtjhk clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their Lhodpfx Aezuynhjgtsk software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm Lsdpfx Aozk N Ategtehk - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1985, Second-hand machine Year of manufacture: 1985 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Lhjdpfxozk N A Tj Agtsk Height adjustment: 80 mm Drilling depth 80 mm Weight: 420 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel Lhedjzk Nuiepfx Agtsk - Pneumatic workpiece clamps: 3 pcs. - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Availability: at short notice Storage location: Röllbach

Condition: used, Second-hand machine Condition: as expected for its age for efficient dowel hole drilling in longitudinal and transverse mouldings for framed doors, door panels Drawer components Crossbars of all kinds 3-spindle motor Spindle spacing 25/25 mm Stroke: max. 80 mm Motor: 1.5 PS Work table 260 x 130 mm Height adjustment from 5–40 mm according to scale with repositionable folding stop Lhjdozk Ny Sopfx Agtek Foot valve control NRW