Used Potentiometer for sale (203)

Condition: not inspected (used), functionality: unexamined, KEB frequency inverter with potentiometer KEB F5 15F5A1E-350A Input: AC 3-phase 50/60 Hz 400V 31.2A UL: 480V 27.3A Output: AC 3-phase 0…599Hz Pedpfxezkay As Am Aogr 0…Uin 24A UL: 21A 17kVA

Year of construction: 1969, condition: used, Motor potentiometer, regulator, motor controller, rotary potentiometer -Manufacturer: Kessler, motor potentiometer type P3-173 KL Podpfjn Tvbrjx Am Aegr -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

Condition: excellent (used), Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer Pgjdpfxsgh Ixho Am Asr -Manufacturer: Siemens, unused potentiometer in original packaging -Type: ASZ12.803 Quantity: 1 piece available -Dimensions: 65/50/H30 mm -Weight: 0.05 kg

Condition: used, Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer -Manufacturer: Siemens, potentiometer unused Ovp -Type: ASZ12.30 -Number: 3x potentiometers available -Price: per piece -Dimensions: 40/35/H20 mm -Weight: 0,05 kg/piece Pjdegh Ixlopfx Am Asgr

Condition: used, Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer -Manufacturer: Siemens, double potentiometer -Type: ASZ22.30 Pgsdegh Iw Iepfx Am Aer -Number: 12x potentiometers available -Price: per piece -Dimensions: 35/20/H40 mm -Weight: 0,05 kg/piece

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Pjdezwmr Eepfx Am Aogr Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: used, Year of construction: 1992, Max. bending length: 3240 mm Max. sheet thickness: 4 mm steel Pjdpszv Tvzefx Am Aegr Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Central lubrication operation manual 5000 kg

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: rotational speed infinitely variable, Manufacturer: 600 Lathes Model: Harrison V350 Centre Height: 170 mm Swing over Bed: 350 mm Swing over Cross Slide: 196 mm Swing in Gap: 535 mm Width in front of Face Plate: 165 mm Distance between Centres: 650 mm Spindle Speeds (stepless via potentiometer across 3 ranges, with digital readout): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle Mount (Camlock): D1-4 Spindle Bore: 54 mm Spindle Motor: 7.5 kW Carriage Guideway Width: 318 mm Cross Slide Travel: 250 mm Top Slide Travel: 140 mm Tailstock Quill Travel: 140 mm Tailstock Quill Taper: MT4 Quill Diameter: 63 mm Metric Version Machine Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral Pitch: 8 - 56 (20) Drive Power: 7.5 kW Equipment: 3-Axis Digital Readout 3-jaw Chuck Röhm D:200 mm 4-jaw Chuck D:160 mm Collet Chuck System Steady Rest 4-position Quick Change Toolpost Live Centre Chuck Guard Additional Chip Shield on Carriage Coolant System Rear Splash Guard Machine Documentation incl. Schematics Dimensions: Floor to Spindle Centre: 1050 mm Overall Length: 1900 mm Pedpfxjxcuulj Am Aogr Overall Width: 1100 mm Overall Height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site by arrangement. All details without guarantee. Errors and prior sale reserved.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° Pgedpfx Asw Nafkem Ajr - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base Pjdpfx Ajwx Aadjm Asgr - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: excellent (used), CATALOGUE NUMBER 8037 TECHNICAL DATA Psdpfx Amszmh U Hs Asgr - Max. width of the workpiece: 1100 mm - Max. height of the workpiece: 160 mm 2 units: 1) Metal, grooved roller for calibrating 2) Rubber, grooved roller + pneumatic sequential apron + metal roller - Motor power: 15 kW - Brake - Top: - Rubber roller, slip, split - Unit - Rubber roller, slip, split - Unit with apron - Rubber, slip, split output roller - Bottom: - 2 metal rollers, slip - Conveyor belt - 2 metal rollers, slip, output - Pneumatic belt oscillation with photocell - Electric table lifting - 2 feed speed types - Feed motor: 0.45 kW / 0.8 kW - Grinding thickness potentiometer - Working pressure: 8-10 bar - Diameter of dust extraction nozzle: 2 x 160 mm - Overall dimensions (L/W/H): 1900 x 1700 x 2000 mm - Weight: 1413 kg ADVANTAGES - Made in Italy, SCM brand - 2 units - Grinding thickness potentiometer - Pneumatic sequential apron - Not painted - DTR documentation - Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (the price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min Pjdpfxsy T Ip Ts Am Asgr - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 1983, Max. bend length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Pjdpezvw Rpefx Am Aogr Bending angle adjustable via potentiometer Hub height of the upper gantry and material thickness adjustable via switch Manual backgauge with spring fingers Weight: approx. 1600 kg

Condition: excellent (used), Catalog number: 8090 Pgsdpfx Amozwgacj Ajr TECHNICAL DATA - max. width of the workpiece: 1100 mm - max. height of the workpiece: 160 mm - 2 units: * from above: - metal roller, pressure roller - 1) grooved rubber roller for calibration - metal roller, pressure roller - 2) metal roller + backing + metal roller - metal roller, pressure roller * from below: - 2 rubber rollers, slip rollers - conveyor belt - 2 rubber rollers, slip rollers - grinding thickness potentiometer - belt blowing system - pneumatic belt oscillation - electric table lifting + manual (for precise adjustment) - stepless feed rate adjustment - with pneumatic brake - total power: 16 kW - diameter of dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1850 x 1600 x 1900 mm - weight: approx. 1200 kg ADVANTAGES – 2 units – Italian production – unpainted – used grinder, very good condition Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm Pgodjv Ab Dqspfx Am Aer - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: used, Year of construction: 2010, Used machine Pedpfx Amezk Nzvo Aogr Year of manufacture: 2010 Features and technical specifications: Right-hand configuration 2 side tables are still in their original packaging H&H / HARDO TH 1020-V46 BV DA (twin unit) Max. application width: 2,040 mm (2 × 1,020 mm) Configuration: Twin-unit system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Knurling on application roller: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Squeegee: pneumatically operated, needle-bearing mounted Main bearing lubrication: external lubrication, filled using a hand-operated grease gun Tank seal: adjustable and replaceable without removing the application element Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: Potentiometer Display: digital speed display Pressure rollers: 2, silicone-coated Pressure rollers, length: 2,040 mm Pressure rollers – diameter: 159 mm Pressure rollers – Actuation: pneumatic Pressure rollers Lowering: automatic after the drive motor is switched off Height adjustment of material feed: electrically driven in manual step mode Stroke of application unit: 0 – 200 mm Conveying height: 925 mm (lower edge of material) Drive for pressure rollers: separate drive Motor: including motor console, mounting and cladding Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: Potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2, made from anodised aluminium plates Adjustable feet: Adjustment range ±25 mm Material flow direction: right to left Heating control: Timer (daily and weekly programme) Temperature control: electronic with digital actual value display Melting tank volume: 2 × 25 litres Heating capacity: 2 × 8.0 kW Rated power: 18.5 kW Control voltage: 24 V Rated frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse rating: 63 A Compressed air connection: < 8 bar Application: Melting and application of non-reactive hot-melt adhesives Weight: 1,560 kg Availability: at short notice Location: Rhineland-Palatinate

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, Important note! Payment for the machine, as is common with used machines, is made in full before loading, no partial payments or installments! HENRI HAUSER OP3 High-precision drilling machine / Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine / gauge drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in the last possession). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the need for tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which can and must be switched on separately before starting work to maintain high accuracy and dimensional accuracy. This explains the factory-high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What is unique is that the Hauser has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and milling at depth with Wohlhaupter, spindle tools, etc. With the mentioned options and in this first-class condition, it is very rare and highly unlikely to be available again. Those familiar with these machines, which are mainly used in the watch industry, case making / defense industry, precision engineering, material testing and the optical industry, know the value of these masterpieces of mechanical engineering. Also ideally suited for engine construction / overhaul, technical universities and training, materials technology, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are of course available in the original! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Pgedpfxezuvwlj Am Ajr Distance table to spindle = 590 mm, spindle speeds steplessly from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net export within EU. Example: Secure shipping by direct transport (without transshipment!) to France/Spain/Italy, etc. up to 1700 km driving distance approx. 1100 - 1450,- EUR.

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg Pgodpfezuw E Rsx Am Ajr - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0803078, spindle diameter: 40 mm, type of input current: three-phase, number of spindles: 4, For sale: Leadermac Linnerman 423c with four 40mm spindles, featuring a feed system controlled by a potentiometer. The maximum feed speed is 30 meters per minute. The control panel is mounted separately on a trolley. Podpfxozvalpe Am Ajgr The equipment is disconnected from the power supply. Spindles: 4 shafts, diameter 40 mm. Feeding system: Variable feed speed controlled via a potentiometer. Feed speed: Adjustable up to 30 m/min. Control panel: Separate control unit mounted on a mobile trolley.

Condition: ready for operation (used), Year of construction: 2000, Max. format X/Y: 320mm/520mm. Thread guiding from front and rear thread spools via thread guide rods, thread tensioning device and thread break monitoring, rear platform height-adjustable by handwheel, adjustable lateral support knives, adjustable signature stops for head and foot side, foot-side stop spring-loaded, signature delivery wheels with DC drive, speed continuously adjustable via potentiometer, lower delivery wheel stationary, upper delivery wheel oscillating, signature transport via adjustable transport chain with plastic transport elements, book delivery height-adjustable, lateral knives at the book delivery adjustable. Documentation available. Inspection possible by arrangement. Pedpszuktzofx Am Aegr

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Pgodpoztrklsfx Am Ajr Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V Pedpfxsv Ha Uie Am Ajgr -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: new, Factory-new, electrically heated stainless steel mixing tank Article number: EBB150RWAD Volume: 152L Dimensions approx.: Ø 660mm x cylindrical height 625mm Overall height: 910mm Material: 1.4301 stainless steel V2A Surface: Matte finish inside and out Welds ground smooth Operating temperature max.: 110°C Operating pressure tank: ATM -Vertical design on rollers -Top: Central cross member for the agitator with two hinged lid halves -Bottom: Flat bottom with side outlet DN50 DIN11851 and disc valve -Agitator flange on the top -2x handle for pushing -1x nameplate Heating system: Indirect heating Double jacket around the tank with glycerine filling as the heat transfer medium. Heating is carried out by an electric heating element in the double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. supply line 16A CEE plug Centric agitator: Slow-speed anchor agitator with wall scrapers Type: SRTGMK/0.37-9.5 Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.37KW Speed: 0-9.5 RPM Operating voltage: 1PH 230V Material in contact with product: 1.4301 stainless steel -Gearbox and motor in the latest aluminum technology, manufacturer Getriebebau NORD -Gearbox with food-grade approved oil filling "Klüber" -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of large anchor agitator in the tank, welds ground smooth, arranged close to the wall -2 Teflon wall scrapers in the cylindrical area, one at the bottom -Stainless steel flange with shaft seal, EPDM Speed control: Compact frequency inverter on the agitator motor with on/off switch and potentiometer Control: 5m cable and RCD socket switch, undervoltage release Eccentric agitator: Speed-adjustable dissolver agitator Type: SRTMKD/1.1-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 1.1KW Speed: 0-1690 RPM Operating voltage: 3PH 400V Material in contact with product: 1.4301 stainless steel -Motor in the latest aluminum technology, manufacturer Getriebebau NORD -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of dissolver disc Ø 125mm screwed onto the end of the agitator shaft, seal O-ring, EPDM -Stainless steel flange with V-ring seal, EPDM -Stainless steel spacers for motor mounting Speed control: Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. On/off switch, potentiometer, phase inverter Pgsdsh Hxxfopfx Am Aor Control: CEE plug switch on the tank with undervoltage release and phase inverter, emergency stop

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Pgsdpfx Amjuhbxao Aor EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Year of construction: 1976, condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, year of last overhaul: 2026, The machine underwent a comprehensive retrofit in 2026! New centering point with carbide insert on the workpiece spindle stock Tailstock with MK-3 mount and air lift Adjuster on the tailstock New centering point with carbide insert on the tailstock 2 grinding wheel flanges 1 new grinding wheel 1 internal grinding spindle Completely renewed paper band filter with new filter fleece and circuit Completely overhauled, steplessly adjustable grinding spindle motor Automatic grinding cycle with dwell time and shut-off Machine geometrically completely overhauled Guides ground and scraped Hydraulic cylinder overhauled New piston rod and seals Pgedpfx Aszr Ep Esm Ajr Machine body and assemblies blasted, primed and completely painted TECHNICAL DETAILS Center height: 125 mm Center distance: 600 mm Grinding wheel flange dimensions: 400 × 50 × 127 mm Speed of internal grinding spindle: 14,000 rpm EQUIPMENT Workpiece spindle stock standard with MK-5 mount, swiveling Stepless speed control via potentiometer