Used Press Brake Tool For Amada/Promecam for sale (60,653)

Condition: new, 60 degree press brake punch H115mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD Lodpjkt Nu Uefx Akyshf

Condition: new, Big gooseneck press brake punch H250/260/H280mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD L125/250mm Ljdpfx Akeiim Ayeyshf

Condition: new, 88 degree standard press brake punch H120mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD Lsdpfxsiiq H De Akyohf

Condition: new, V100mm Press brake dies of Amada/Promecam style Lsdpfx Aewcx Ncjkyjhf

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Lhodpfjw Iq Ugjx Akysf Good condition

Year of construction: 2006, operating hours: 17,250 h, condition: used, Empty weight: 7.500 kg Dimensions (LxBxH): 370 x 170 x 265 cm Serial number: HFBO 125 30 H970202 Press Capacity: 125 tons (~1,250 kN) Table length: 3140mm Table width: 90mm Work service height: 960mm Inlet: 450mm Cylinders stroke: 180mm Year of construction: 1997 Working hours: 17.250 hours Ledpfoy Ewmrjx Akyjhf Total dimensions LxWxH: 3700x1700x2650mm Own weight: 7500kg Please note ; without tooling Online auction of the surplus sheet metalworking machines, aluminium sheet stock and welding tools (e.g. RAS, AMADA press brakes, SUHNER, MIG MAG ESAB, TRM fiber laser welding etc.) following the outsourcing and decommissioning of the metal and welding workshop in Illnau-Effretikon (near Zurich) in Switzerland. The online auction opens Thursday 16 April and closes Thursday 21 May. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 19 May Pickup days are on: - Tuesday 2 June - Wednesday 3 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 1990, operating hours: 7,248 h, total length: 3,000 mm, total width: 1,400 mm, total height: 2,200 mm, Weight: 3.450 kg - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: ITPS 050 20 P00356 - Operating hours: 7248 - Drive system: CNC - Power [kW]: 6.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 50 - Max. working width [mm]: 2000 - Column gap [mm]: 1730 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 105 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3000mm x 1400mm x 2200mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Lodpfx Akey Dcpvsyjhf

Condition: good (used), functionality: fully functional, Used WILA OZU-318 tools V100mm Ledjyzh Sdspfx Akyohf OZU-318 100x80° R=20 H=100 1x 515mm 2x 200mm Total length L=915mm Fixed price € 1,650,- FCA Drachten, NL No response to offers or requests for lowest price.

Condition: used, #200112 Trumpf OW200/S - press brake tools / upper tools 86.00° R4.00 / H=218.30 / 800 kN/m Segment lengths: Lhodpfxey Anydj Akysf 2x 25 mm 1x 30 mm 1x 40 mm 2x 100 mm (reduced body 70 mm 1x left / 1x right) 5x 200 mm 5x 300 mm ----- #200113 Trumpf OW201/S 86.00° R1.00 / H=220.00 / 800 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm (2x reduced body 70 mm 1x left / 1x right) 1x 200 mm 7x 300 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3 AX, working width: 2,500 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, control voltage: 380 V, oil tank capacity: 70 l, overall weight: 5,000 kg, total length: 2,800 mm, total width: 1,800 mm, total height: 2,200 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, finger protection, type plate available, Press brake SCHIAVI - AMADA RG 50-25 Press force 50 tons Table length 2550 mm MASTER TASK 3-axis CNC control Lhjdpfx Aeygu Aljkyef Complete with upper and lower dies Fully functional and connected for tests and video

Condition: used, #200103 Trumpf EVO22W10 (without identification groove) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 2x 50 mm 7x 100 mm 2x 200 mm 2x 300 mm 7x 500 mm ----- #200104 Trumpf EVO22W10 (identification groove at the bottom) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 40 mm 2x 45 mm 2x 50 mm 2x 200 mm 1x 300 mm 3x 500 mm ----- #200105 Trumpf EVO22W10 (identification groove in the center) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 3x 25 mm 2x 30 mm 2x 35 mm 2x 40 mm 2x 45 mm 1x 50 mm 4x 100 mm 2x 200 mm 2x 300 mm 8x 500 mm Lsdeyx Hxwspfx Akyjhf ----- #200107 Trumpf EVO26W24 86.00° R2.50 / H=100.00 / 700 kN/m Segment lengths: 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm ----- #200108 Trumpf / Schmid EVO24W16 86.00° R1.60 / H=100.00 / 700 kN/m Segment lengths: 1x 25 mm 1x 30 mm 1x 40 mm 2x 45 mm 2x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 5x 500 mm ----- #200109 Trumpf EVO20W6 86.00° R0.60 / H=100.00 / 400 kN/m Segment lengths: 3x 100 mm 2x 200 mm (1x damaged) 6x 500 mm ----- #200110 Trumpf EVO22/S-W10 86.00° R1.00 / H=100.00 / 380 kN/m Segment lengths: 1x 40 mm 2x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm

Year of construction: 2025, condition: new, functionality: fully functional, Rolleri segmented die / lower tool system AMADA: 835 mm x 2, 200 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm, 10 mm. V16 R2 85°, V22 R2 85°, V35 R2 85°, V50 R3 85°. Lhsdpfjyqyfmox Akyef Rolleri segmented upper tool system AMADA: 455 mm, 300 mm, 150 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm x 2, 10 mm and left horn 100 mm + right horn 415 mm. R 0.8 / 85° H 66.5.

Year of construction: 2025, condition: new, functionality: fully functional, UKB lower die segments / bottom tool system AMADA 415 mm, 835 mm with minor damage (brand Eurostamp) V16 R2 85° Lhjdpfx Akeyqyc Ssyof V22 R2.5 85° V35 R3 85° V50 R4 85° UKB upper tool segments system AMADA 415 mm, 150 mm, 35 mm, 15 mm and horn left/right 100 mm R 0.8 / 85° H 66.5

Condition: used, WA0136 3150 € 1 8 mm 3 x 1.000 & 1 x 1.050 mm complete 30° Lhodoyukbtopfx Akysf

Condition: used, gebraucht WA0127 1230 € Ledpfjyukbajx Akyshf 1 2500 mm 70 mm 70 mm 8/11/12/16/24/36 mm

Condition: used, gebraucht WA0181 Lhsdpfoyukavjx Akyof prompt, Zwischenverkauf v 1800 € 1 3100 mm 160 mm 45 mm mint condition 86° Slightly cranked, planed

Condition: used, gebraucht Lhsdpfoyukaiox Akyef WA0168 prompt, Zwischenverkauf v 2800 € 1 190 mm mint condition 3 divided, 1x3500 1x2000 1x1000 mm slightly cranked

Condition: used, gebraucht WA0137 1960 € Lhedjyui Tujpfx Akyjf 1 3000 mm 190 mm slightly cranked

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EP8607, Press brake punch for Trumpf 86 degree H220mm gooseneck punch 42CrMo material with full body hardened and radius tip laser hardened Lhodpfx Akoyzpf Eoyof

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Lhedjw Emf Dopfx Akyef

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Lhjdpfx Aswbvmiokyof Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment Lodsmck Ryjpfx Akyohf - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Lhodpfx Akegph Arjyjf -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 33 x 170 mm -Length: 1485 mm (1 x 855/630 mm each) -Weight: 44.6 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool Lhedpfx Akogwhvajysf -Tool: for press brake, die / hemming tool -Measures: see drawing in the photos -Dimensions: 150/101 / H75 mm / 150/77 / H159 mm -Weight: 7.2 kg / 11.4 kg

Condition: used, Bending tool, die, upper knife, upper tool, deer foot tool Lodpfx Akecn Rdvoyshf -Tool: for press brake -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg