Used Pressta Eisele Aluma for sale (137)

Condition: good (used), Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm Kjdpfxjb Hw Dbj Abtolt -Support height: 1400 mm -Weight: 62 kg

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. Kledpfjy Dtpmox Abtot MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Ksdpjq Awg Esfx Abtslt

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Klodpfx Ajrv A Hmsbtjt Manual feed Weight: approx. 280 kg

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Ksdjy Tizkopfx Abtslt Price: 2,000 Euros

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Kljdpfx Ajtt Eb Sjbtjt Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm Klodpfxetk Ul Rj Abtst 130 mm projection ■ Projection with turntable 90 mm ■ Table top height 950 mm ■ Tappet force 90 KN at 10 bar

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Ksdpfx Abefitbwotslt Dimension 60 x 850 x 1500 mm Weight 300kg

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Kedpofcbb Hjfx Abtelt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive ■ Operated via foot valve Kedpfx Aey S Abbjbtolt ■ Max. stroke length: 40 mm ■ 25 double strokes/min. ■ Max. installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table top height: 950 mm ■ Ram force: 90 kN at 10 bar

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Profile height max. 150 mm, profile width up to 300 mm Kedpjy S Aa Dofx Abtslt Operation via switch and 2 hand levers

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 8698, overall weight: 380 kg, Powerful corner crimping machine for processing aluminium profiles with groove sizes from 25–60 mm and profile chamber offset up to 40 mm. The adjustable punching units and infinitely height-adjustable sensors, knives, and stop inserts allow for precise adaptation to a wide range of profile contours. Kedpfsy Sptkex Abtslt

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Kjdsy Nm Erepfx Abtjlt Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Condition: like new (used), Year of construction: 2019, functionality: fully functional, PRESSTA CYKLON D double-head automatic screwing machine with all accessories for sale. Kodpeyziu Tofx Abtjlt Package deal: if purchased together with the WM740 welding line and SMC350 machining center, which are also listed in our ads, the price is EUR 180,000.

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Kjdpfx Aoqzmnujbtelt Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm Ksdpfjy Naz Tsx Abtelt - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Notching saw for cut-outs and bevel notching. The machine is equipped with two saw blades, each with a diameter of 500 mm. It features a pneumatic clamping device. The feed is hydropneumatic and is triggered via two-hand control. The material stop is swiveling, with locking points and a digital display. Notching height and angle are motorized and digitally indicated. Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Kodpeyzcpdjfx Abtelt

Year of construction: 2017, condition: excellent (used), functionality: fully functional, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive ■ Operated via foot valve ■ Max. stroke length: 40 mm ■ 25 double strokes/min. Kledpfx Abjy Hriwetjt ■ Max. installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table top height: 950 mm ■ Ram force: 90 kN at 10 bar

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P EU shipping approx. €350 Klsdpfx Absl Skl Iotst

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm Kjdoyz Tqrspfx Abtelt - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel Kledpfsyz S Trsx Abtjt - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Kledoyz T A Uopfx Abtst Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Kodpfewx I Hvox Abtolt Push-in length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

Year of construction: 2019, condition: excellent (used), functionality: not functional, Compact hydraulic C-frame punching machine with 160 kN punching force for precise applications on smaller profile cross-sections. The torsion-resistant frame design ensures accurate punching in aluminium, steel or plastic. Kjdpfx Absy Agqnotjlt

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Kodoyyxxfspfx Abtelt Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)