Used Pressure Shoe for sale (14,183)

Condition: good (used), Pressure shoe for Weinig planer and moulder Bedpoyryzksfx Ad Aodb

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Bodpfetrdyrjx Ad Ajdb Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Bjdpfjfz Dvvex Ad Asdb High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control Bdodpfefz Ax Ssx Ad Aeb • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Bedpfxoflpmqo Ad Asdb ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Bedefzrapopfx Ad Asdb The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Bdodpfx Adofz A D Ns Asb

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 15,000 mm, type of input current: three-phase, empty load weight: 286 kg, input voltage: 400 V, fuel: diesel, heating capacity: 145 kW (197.14 HP), overall weight: 286 kg, temperature: 98 °C, noise level: 91 dB, Equipment: chassis, Kärcher HDS 2000 Super - Condition of the unit: As new, used only for maintenance purposes, < 10 operating hours Bodpfxsy H Dure Ad Aedb - Configured with: - 800 l - 1800 l delivery rate - 30 - 180 bar working pressure - 15m high-pressure hose (longlife) - Gun, lance, power nozzle - Dry run protection - and much more All maintenance carried out up to 2024

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 40,000 mm, empty load weight: 1,600 kg, fuel: diesel, overall weight: 1,600 kg, water tank capacity: 500 l, temperature: 98 °C, noise level: 91 dB, Equipment: chassis, HDS-Trailer 17/20 / Cap Version Stationary Solution on forklift-compatible base frame with castors (see photo) Equipment condition: as new, only used for maintenance purposes, < 10 operating hours Configured with: - 900-1700 l/h water flow rate at 200 bar pressure - 80-98°C water temperature - 500L water tank / Kärcher hood - On base frame with castors (forklift-compatible) - Diesel engine (no electrical connection required) Bodsy H Dmujpfx Ad Aodb - Speed control via throttle lever - 2 x high-pressure hose reels, each with 40m HD hose 6.110-045 - 2 lance operation incl. equipment (accessories) consisting of: gun 4.118-005; lance 1050mm 4.112-000; quick coupling 2.115-000; plug-in nipple 2.115-001 - S/N: 11514 - 1x HD hose 40m, 6.110-045 - 1x pipe cleaning hose 20m, 6110-008 - 1x pipe cleaning nozzle, 5.763-088 All maintenance carried out up to 2024

Year of construction: 2016, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). stabau roller tracks S1-RGSCH 100 / 4 t load capacity / Year of manufacture: 2016 / in stock & immediately available / very good condition Price per pair: €2,390.00 net / €2,844.10 gross Bjdoy Ikz Iepfx Ad Ajdb Load capacity: 4,000 kg Load center: 1,500 mm Own weight: 710 kg (complete set) Exact pocket dimensions can be found in the attached images. A total of three pairs are available. We have a wide selection of various attachments in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. Upon request, we can also provide you with a financing offer. We are an official sales and service partner for Magni telehandlers. We are an official distributor and service partner for Holp. We are an official distributor and service partner for Gierking GMT. We are an official distributor and service partner for OilQuick. We are an official distributor and service partner for Weber MT. We are an official distributor and service partner for Westtech. We are an official distributor and service partner for DMS. We are an official distributor and service partner for Seppi M. We are an official distributor and service partner for JCB construction machines. We are an official distributor and service partner for Mercedes-Benz. We are an official distributor and service partner for Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Subject to errors and prior sale! Internal ID: 160520 = More Information = New: No Suitable for: Machines for loading and unloading Contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and fine sanding machine, Kundig Brilliant wide belt sander with electronic segmented sanding shoe, tiltable sanding unit, and lacquer sanding capability. Bedpoyxg N Nsfx Ad Aedb A video of the running machine can be provided upon request. Ideal sanding machine for interior construction businesses, also suitable for intermediate lacquer sanding. Single-belt machine with combination sanding unit and electronic segmented pressure beam. Edge segments can be switched on and off. Pressure beam segment width 22mm (ideal for intermediate lacquer sanding). Pneumatically adjustable calibration roller, grooved rubber-coated roller with grit compensation. 11 kW drive motor. Infinitely adjustable cutting speed between 3 - 15 m/s via frequency inverter. Feed belt speed steplessly adjustable from approx. 3 to 15 m/min. Belt blowing device, workpiece-controlled. Constant table height of approx. 950mm by adjusting the upper machine section, thus integrable into sanding lines. Feed belt still very grippy and in very good condition. Conveyor carpet with adjustable vacuum blower enables secure holding of even small parts. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Sanding belt dimensions: 1120 x 2000mm. Infeed and outfeed roller tables. Hood lock. Extraction connections: 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, calibration roller adjustment, and segment sanding shoe parameters. Thickness measurement system with adjustable chip removal and Enormatic automatic thickness adjustment with feed release, eliminating the need for constant manual caliper measurement. Programs for different sanding tasks can be saved and selected via smartselect. CE mark. Operating manual. 2 sanding belt inserts available. The four bellows have been replaced. Without the connection cable shown. Original paint, only a few touched-up spots. Very good condition from a small workshop. Machine has approx. 1,395 operating hours, i.e. about 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2300kg. Includes large mobile storage table at belt height for sanding belt storage. Table size approx. 1520 x 1360 x 950mm. Includes various sanding belts from K80 to K400. The machine can be demonstrated at our premises by appointment. We only offer machines that are available and ready for demonstration in our warehouse—see "more offers from this supplier."

Year of construction: 2015, condition: used, functionality: fully functional, This listing is for a 150 LITRE boiling kettle from the premium manufacturer MKN, model Optima 850. The unit is in good used condition, free of defects, following a comprehensive inspection. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6-month warranty on electrical components, limited to replacement of defective parts (excl. installation/removal costs) - High-quality branded equipment at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or collection options - Expert advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 inspection Technical data: W x D x H: approx. 1000 x 850 x 700 mm Inner kettle: diameter 665 mm, depth 500 mm Electrical connection: V: 400 / kW: 26 Serial number: 15213196 Model: 2022805C Rated capacity: 163 litres Usable fill quantity: 150 litres Condition: Used, fully functional after major inspection Additional features: - Inner kettle made entirely of highly corrosion-resistant chrome-nickel steel (1.4404) - Double-jacketed kettle with separate, integrated, and maintenance-free VAPRO steam generator system for rapid heat-up times, low energy and water consumption, and high efficiency - Short heating times due to VAPRO rapid steam system - Standard with 3 cooking levels (gentle simmer, medium, and vigorous boil) - Automatic supply water monitoring and refilling, ensuring continuous operation - Double-walled hinged cover and mixing faucet as standard Bdedpfxjycq D Rs Ad Asb - Draining via front-mounted safety drain valve - Standard with interface for connection to an energy optimisation system in accordance with DIN 18875 and potential-free contact Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, require advice, or would like to view the equipment on site? You can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale exclusively according to our general terms and conditions (GTC).

Condition: used, Year of construction: 2013, machine/vehicle number: 12052, total length: 4,700 mm, total width: 1,600 mm, total height: 2,400 mm, pressure: 6 bar, temperature: 80 °C, Eko-Pil KMPN 3500 Machine Data Designation: Eko-Pil KMPN 3500 Overall Dimensions: 4700 × 1600 × 2400 mm Max. Workpiece Dimensions: Ø 450 × 3500 mm Load Capacity: 200 kg Net Weight: 4000 kg Gross Weight: 6500 kg Operating Hours: 10,608 h Process Data Medium Temperature: 0 – 80 °C Tank Volume (Washing): 1160 l Tank Volume (Rinsing): 1050 l Water Pressure: max. 6 bar Water Connection: 1" Drive Data Motor Rotation Direction: right Performance Data Door Drive: 0.37 kW Roller Drive: 0.55 kW Main Pump (Washing): 7.5 kW Pump (Washing): 7.5 kW Drying Fan: 2.2 kW Fan: 0.3 kW Total Installed Power: 100 kW Bdodjy H I Nyjpfx Ad Asb Heating Washing Basin: 5 × 6.0 kW Rinse Tank: 5 × 6.0 kW Drying: 4 × 4.5 kW Technical Data Connection: 3 × 400 V, 50 Hz

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee Bdsdpfx Adeyuty Ss Ajb

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Bdodpfx Adjy Exqle Ajb Availability: immediately ex stock, inspection by appointment possible

Condition: excellent (used), Compressor type: Dry air Bdodpfx Aowcgc Red Asb Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Motor power: 90kW

Condition: used, Year of construction: 1990, operating hours: 9,500 h, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 2,000 l, fuel tank capacity: 600 l, water pressure: 1,000 bar, pump capacity: 130 l/min, We offer this used Woma 325ZP30 high-pressure water jet in isotermic container, year of construction 1990. It could be sell separetaly without container. Bdedpfx Aeyu Imtjd Asb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), We are offering this pressure reducer for sale. Item No.: RS3602021018 5 units available in like-new condition. Price for the complete lot: €400. Operating manual included. Shipping possible. No returns or warranty. Bdodpex Ekruefx Ad Aob

Condition: good (used), tank capacity: 600 l, Stainless steel reactor model TFZRJ-500L-D, 500 liters, with agitator and jacket. Bsdpfx Adjy Hfwzs Asdb

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: Elektror, pressure blower radial fan type RD 92 -Drive: 15 kW -Speed: 2950 rpm -Volume flow rate: 7500 m³/h -Pressure: 8300 Pa -Inlet connection: Ø 220 mm -Outlet connection: Ø 220 mm -Protection class: IP 54 -Fan wheel: Ø 720 x 60 mm Quantity: 1 piece available Bdsdpfxownccqo Ad Aeb -Dimensions: 960/910/H1075 mm -Weight: 210 kg

Condition: used, functionality: fully functional, This is the mobile version of a 100 LITER cooking kettle from the premium manufacturer MKN, model Optima 850. The unit is in excellent, well-maintained condition. The kettle is a double-jacketed model featuring a separate, integrated, low-maintenance steam generator system (VAPRO), which ensures rapid heating times, low energy and water consumption, and high efficiency. Thanks to the VAPRO rapid-steam system, you benefit from short boiling times. The unit is also equipped with automatic process water monitoring and replenishment, ensuring it's always ready for operation. Additionally, its mobile design (on casters) allows it to be easily adapted to various spaces. The device has undergone a comprehensive inspection in our in-house workshop and is fully functional. The cooking kettle will be available from calendar week 19. You will receive an invoice including VAT. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to replacement of defective parts (excluding removal and installation costs) • High-quality brand equipment at fair prices • Professional refurbishment / inspection and expert cleaning • Tested & fully functional – or your money back • Flexible options for shipping or collection • Expert advice – before and after the purchase • Provision of operating manuals, wiring diagrams, and spare parts Bdedpfxoy Ewr Io Ad Aeb • Inspection according to DGUV V3 seal Technical data: • W x D x H: approx. 800 x 850 x 700 mm • Inner kettle: diameter 630 mm, depth 397 mm • Electrical connection: V: 400 / kW: 21 • Year of manufacture: 2011 • Serial number: 07139498 • Model: 2022804D01 • Nominal capacity: 130 liters • Usable filling volume: 100 liters Condition: Used, comprehensively inspected, fully functional Further details: • Inner kettle entirely made from highly corrosion-resistant chrome-nickel steel (1.4404) • Double-jacketed kettle with separate, integrated, maintenance-free VAPRO steam generator system for rapid heat-up times, low energy and water consumption, and high efficiency • Short boiling times thanks to rapid-steam VAPRO system • Standard features include 3 cooking levels (gentle simmering, medium, and vigorous boiling) • Automatic process water monitoring and replenishment for continuous readiness • Standard with double-walled hinged lid and mixing faucet • Forward draining via safety drain tap • Standard interface for connecting to an energy optimization system to DIN 18875 and volt-free contact Shipping: • Delivery or self-collection by arrangement • Worldwide shipping available on request • Shipping to islands or mountain stations only by arrangement Modifications and errors excepted. Do you have questions, require advice, or wish to view the product on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our general terms and conditions (GTCs).

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, A new, unused centrifugal fan from Elektror is offered for sale here. This was bought for one of our projects but was never used. Availability: In stock Bdodpfx Adekt S S Nj Aob Quantity: 1 piece Further information can be found on the nameplates. Feel free to contact us if you have any questions.

Condition: used, Year of construction: 2006, I'm selling a used industrial pressure washer from the Finnish company Aqua Clean in very good condition. The machine has a working space of 140 cm in diameter and a height of 90 cm. It's made of stainless steel. It's also equipped with an oil separator and filter. The washer is insulated. The upper and side lances are driven by a motor with a reducer. The lower lance is driven by a pump pressure of 4 atmospheres. It also has a fume extractor. It has a heating temperature of up to 90 degrees Celsius and an operating timer. The last photo shows the new machine, still in production today in its original form. The manual is in English. The main pump has a silicon carbide seal replaced to withstand the high temperatures and aggressive chemicals. Bdedpoy Hxz Hefx Ad Aeb

Condition: used, - 4 heads with Fastron computer - 1 unit in stock - Used model Bdsdox T Ac Ijpfx Ad Ajb - Refurbished equipment: the equipment is prepared when ordered, pickup and return dates are agreed upon at that time (please request the price after refurbishment).

Condition: excellent (used), - Dimensions: 486x965x1219 mm - Capacity: 25L of oil - Year: 05/2015 - Model: PFG-800 - Temperature: 20-200°C Bdodpfxjwybzcs Ad Ajb - Computer with adjustable programs - Power: 0.6 kW - Voltage: 220V - Weight: 135 kg - Refurbished equipment: the equipment is prepared upon order, pick-up and return dates are agreed at that time (please request price after refurbishment)