Used Printing Machine Bürkle Sdlr 1300, Druma for sale (67,702)

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Kodpfx Ahowhp Dzs Aelw Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg Ksdpfx Ahszc Nmwj Aelw ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2019, Door panel postforming line Kraft / Costa / IMA / Bürkle / Homag Coating line consisting of: Gantry feeder Brand: Kraft Year of manufacture: 2019 Technical specifications - With vacuum lift - 2 feed roller conveyors - One transport roller conveyor for onward transport Wide-belt sanding machine Brand: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 Consisting of: Wide belt sander (sanding from below) Technical specifications - Contact roller - Electronic shoe sanding unit - Cleaning brush - Intermediate conveyor belt, length approx. 3000 mm Wide-belt sander (sanding from above) Technical specifications - Identical equipment Complete formatting, laminating, and postforming line Consisting of: Roller conveyor system Brand: Kraft Year of manufacture: 2019 Technical specifications - 3 individual elements - Centering station Double-end profiler Brand: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical specifications - Equipped with feed conveyor and alignment station - Scoring saw at the bottom - Splitter - Flazer - Prism cutter - Joining cutter - Cross-edge milling unit - 3 profiling milling units - Brushes Laminating system consisting of: Feed conveyor belt Brand: Kraft Year of manufacture: 2019 Glue applicator Brand: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical specifications - With infeed table, manufacturer: Kraft - Steel platform with stairs and various pumps - Glue melting unit GWK Eco 03A Infeed Table for Laminating Machine Brand: Kraft Year of manufacture: 2019 Laminating Machine Brand: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical Specifications - New Siemens Simatik KMG Touch control system - Bürkle GLK calender - Includes film holder and saw for trimming excess material - Working width 1300 mm - 2 GWK temperature control units - Column-mounted swivel crane for loading paper rolls Klodpey Dr Hqofx Ah Aow - Unloading conveyor belt Postforming machine Brand: Homag Technical specifications - Infeed table - With 2 saw units (horizontal and vertical) - Intermediate buffer with 4 levels - Infeed to the postforming machine - 2 identically configured processing sides with gluing - PU pre-melting unit Nordson / VersaBlue, built in 2020 and 2004 - Pressure zone with turret magazine for various profiles - Various milling units and buffing brushes - 2 cooling units BEKO Bekoblizz LC, built in 2020 Conveyor belt with inspection system - Swivel arm with vacuum suction cup - Inspection station for visual inspection of the workpiece Portal destacking Brand: Kraft Technical data - With vacuum portal and 3 destacking stations Automatic cross-transport cart Brand: Kraft Year of manufacture: 2018 Technical specifications - Roll width: approx. 1400 mm - Roll length: approx. 2800 mm Used door panel postforming line Kraft / Costa / IMA / Bürkle / HomagCoating line consisting of:Gantry feederBrand: KraftYear of manufacture: 2019Technical specifications- With vacuum lift- 2 feed roller conveyors- One transport roller conveyor for onward transportWide-belt sanding machineBrand: CostaType: KK7 CT CT 1350Year of manufacture: 2018Consisting of:Wide belt sander (sanding from below)Technical specifications- Contact roller- Electronic shoe sanding unit- Cleaning brush- Intermediate conveyor belt, length approx.

Condition: ready for operation (used), machine/vehicle number: 5981, Working height: 870 mm Working width: 1300 mm Conveyor belt width: 1270 mm Conveyor speed: 6 - 30 m/min, continuously adjustable Kjdpfxoyah Uzj Ah Aolw Clearance height: 3 mm - 80 mm 1 rubber-coated application roller, 238 mm diameter, rubber coating 5 By1 1 chrome-plated metering roller, 174 mm diameter Electrical equipment: Operating voltage 400 V, 50 Hz 3 phases Total connected load: 1.9 kW Motors and switching devices in explosion-proof design Additional equipment: Individual drive for the metering roller, continuously adjustable, with oscillating metering roller squeegee Operating side: left Machine length: 1000 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Kjdpfxst Dx U Sj Ah Ajlw Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: used, Year of construction: 2001, machine/vehicle number: 9830-01, working width: 1,300 mm, roller diameter: 250 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The coating system consists of several individual machines, which are composed as follows: Pos. 1 - MANFRED LAMPRECHT MASCHINENBAU BM 1300 - V (Brushing machine) Working width max.: 1,300 mm Total power: 4.2 kW Pos. 2 - BURKLE SAS 1300 (Coating machine) Working width max.: 1,300 mm Diameter of application roller: 250 mm Coating units: 3 Coating unit 1 Unit type: Metering unit Material: Steel Roller diameter: 180 mm Coating unit 2 Unit type: Application unit Klodpfxey Uwnbe Ah Ajw Material: Rubber Roller diameter: 250 mm Coating unit 3 Unit type: Filling unit Material: Steel Roller diameter: 250 mm Pos. 3 - BURKLE UV SYSTEM Working width max.: 1,300 mm Drying system: Ultraviolet lamps - UV System type: Motorized feed rollers Pos. 4 - BURKLE SLC 1300 (Coating machine) Working width max.: 1,300 mm Diameter of application roller: 250 mm Coating units: 2 Coating unit 1 Unit type: Metering unit Material: Steel Roller diameter: 180 mm Coating unit 2 Unit type: Application unit Material: Rubber Roller diameter: 250 mm Pos. 5 - HACKEMACK KTR 3370 (Drying machine) Working width max.: 1,300 mm Drying system: Ultraviolet lamps - UV Number of lamps: 2 System type: Feed belt The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8542

Condition: used, Year of construction: 2004, machine/vehicle number: 10720, working width: 1,300 mm, power: 3.2 kW (4.35 HP), table length: 400 mm, table width: 1,300 mm, number of rollers: 2, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working width max.: 1,300 mm Kledpfjy Uv Adox Ah Aew Number of rollers: 2 Table width: 1,400 mm Table length: 400 mm MACHINE DETAILS Total power: 3.2 kW EQUIPMENT CE marking The machine will be sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8533

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Kljdpfx Aov Hn N Ueh Aow Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Year of construction: 1995, condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7251 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 2,2 kW, 400V, 50 Hz, 3-phase Kodpfxog Hr A Io Ah Aslw Size for transport: 2850x900x2200 mm Weight: 1450kg Stock No: 2000360

Year of construction: 1995, condition: good (used), UV putty roller Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7250 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Weight: 1450kg Klodpsg E Uf Sefx Ah Asw Stock No: 2000353

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Ksdpfxev Hw Hcs Ah Ajlw Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Working width 1300mm. Total length 2,00m Total power 18,7kW Klsdpovxa T Asfx Ah Aew 1 Lamp GA 120 W Very good condition, available immediately.

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Klodjv Sa Utjpfx Ah Asw Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, overall weight: 2,000 kg, product length (max.): 2,000 mm, product width (max.): 980 mm, production capacity: 180 unit/h, TECHNICAL DETAILS Print head manufacturer: Kyocera Number of print heads: 4, 8, or 12 Number of print stations: 2 or 3 Color channels with 4 print heads: CMYK Color channels with 8 print heads: CMYK + KYMC or CMYK + 4 × White Color channels with 12 print heads: CMYK + KYMC + 4 × White or CMYK + 8 × White Print format with frame, with 2 or 3 print stations: max. 400 × 500 mm Frameless print format, with 2 or 3 print stations: max. 600 × 900 mm Frameless print format, with 1 print station: max. 2,000 × 980 mm Printing speed: up to 180 pieces/hour Ink type: Water-based pigment ink Container size: 10 l MACHINE DETAILS Operating system: Linux RIP software: aeoon RIP software Interfaces: OPC UA and REST Ambient temperature: 22–24 °C Relative humidity: 50–80 %, non-condensing Voltage supply: 3 × 400/208 V + N + PE Mains frequency: 50/60 Hz Voltage tolerance: ±5 % Power consumption: max. 6.3 kVA Operating pressure: 7 bar Compressed air quality class: 5 Residual oil content: 25 mg/Nm³ Residual dust particle size: 40 µm Residual dust content: 10 mg/Nm³ Kjdpfxezmr Azo Ah Aslw Compressed air dew point: +7 °C Residual water content: 7.8 g/m³ Air consumption: max. 500 l/min Dimensions & Weight Machine dimensions: 4,100 × 2,900 × 2,000 mm Machine weight: 2,000 kg

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20082440, overall weight: 1,500 kg, product length (max.): 1,200 mm, product width (max.): 800 mm, production capacity: 150 unit/h, TECHNICAL DETAILS Printhead manufacturer: Kyocera Number of printheads: 4 or 8 Number of print stations: 2 Color channels with 4 printheads: CMYK Color channels with 8 printheads: CMYK + KYMC or CMYK + 4 × White Printing speed: up to 150 pieces/hour Printing format with frame at 2 print stations: max. 400 × 500 mm Frameless printing format at 2 print stations: max. 500 × 700 mm Frameless printing format at 2 print stations: max. 1,200 × 800 mm Ink type: Water-based pigment ink Container size: 10 l MACHINE DETAILS Operating system: Linux RIP software: aeoon RIP Software Interfaces: OPC UA and REST Ambient temperature: 22–24 °C Relative humidity: 50–80 %, non-condensing Voltage supply: 3 × 400/208 V + N + PE Mains frequency: 50/60 Hz Voltage tolerance: ±5 % Power consumption: max. 6.3 kVA Ksdpszmr Ahjfx Ah Ajlw Operating pressure: 7 bar Compressed air quality class: 5 Residual oil content: 25 mg/Nm³ Residual dust particle size: 40 µm Residual dust content: 10 mg/Nm³ Compressed air dew point: +7 °C Residual water content: 7.8 g/m³ Air consumption: max. 500 l/min Dimensions & Weight Machine dimensions: 2,800 × 2,200 × 1,700 mm Machine weight: 1,500 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, paper width (min.): 508 mm, paper width (max.): 1,270 mm, number of feeding trays: 1, Equipment: documentation/manual, raster image processor, Polielettronica LaserLab 127cm 50" Kodpjyn Rf Ssfx Ah Aolw Digital Lab Photography The word compromise does not exist at Polielettronica, the maximum in terms of quality and productivity are the only possible targets. Just for this the LaserLab is equipped with a solid state RGB laser unit, it is the only exposure system which allows the maximum in term of colour depth, colour separation, tone continuity and maximum details in the Highlights and Shadows. The Polielettronica 16bit/colour graphic processor guarantees the complete transfer of information from image to paper. The Laser alignment system and the optical transfer, through a single fiber optic developed at Polielettronica, guarantees the maximum quality of each of the 1,393,545,600 pixels (1,3GB) needed to expose a 127x254cm. All this in 60 seconds! The paper is cut and positioned into the drum. The exposure unit starts to move on the air cushion and the mirror rotates to reflect every point on the paper. The laser unit converts the image data coming from the computer into a laser beam, then transfers it to the drum via fiber optic. The exposed paper is delivered to the paper processor, at the same time a new exposure begins from point 1. Resolution: 305/254dpi Exposes at maximum size in 60 seconds! Specifications: Exposure Section Laser: R - G - B Solid State Definition: 305/254dpi Calibration and Exposure Data Processing: 16 bit/colour Optional: up to 1016dpi Drum Exposure System: guarantees maximum quality for each pixel (focus - overlapping - shape) on all exposed surface. Pure Black & White Kit: On request. Print size: From 508x508mm to 1270x2540mm, From 20x20" to 50x100" Paper Widths:Any from 508mm (20") to 1270mm (50") Productivity: Size: 127x250cm (50x100") Width: 1270mm (30") prints/hour: 18 Large Size, Great Handling: The paper box remains at ground level and is easy to load; if it`s necessary to work on medium format, both the 50 and 76cm boxes can be used (available as optionals). They are the same boxes used on the LaserLab 50 and 76, light and easy to handle. Machine used, but well maintenance over the time so it is precise. All the transportation's cost and customs will be managed by the buyer

Condition: refurbished (used), Year of construction: 2017, Vutek H2000 UV Hybrid Printer fully refurbished with 3-month warranty Colors: 6C CMYL LCLM, 2 White Resolution: 1000 dpi with 7pl Ultradrop Print width: 205 cm, print height: 5 cm Kjdpfx Aeyzg Tyoh Aolw Speed up to 90 m²/h

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, color channels: 8, Vutek GS 5000 LXpro LED 5 m UV roll printer with LED lamp Very low noise and quick start-up Resolution: 12pl-1000 dpi Colors: 8C CMYl + Light colors, white (over and under print) Speed up to 224 m²/h Mesh Kit - Kledsyzg Nbjpfx Ah Aow Fully refurbished with warranty by EFI dealer Available now, end of April.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used finishing machine, the “SDD SFM7714 Square Fold Module.” Items for Sale: 1 x SDD SFM7714 Square Fold Module Ksdpfezmp Uzox Ah Aslw We can easily configure the machine to meet your specific needs. Please feel free to contact us! Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order Packaging and Shipping: You are welcome to inspect the unit during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Epson SureColor F500” production system. Item for Sale: 1x Epson SureColor F500 We can easily configure the machine to your specifications. Please feel free to contact us! Klsdpfx Aozmpz Ish Aew Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 2015, A digital Agfa UV large-format hybrid printing system is offered. Print resolution: 720dpi/1440dpi, max. print speed: 53m²/h, ink configuration: CMYK + lc + lm + white, max. media width: 2050mm, max. print width: 2000mm, max. media thickness: 45mm, max. board weight: 10kg/m². Machine dimensions X/Y/Z: approx. 4350mm/1470mm/1600mm, weight: approx. 1800kg. Including 4 nearly new tables for board printing and a workstation. The ink configuration is currently converted for traffic sign ink. Conversion back to standard CMYK is possible. An on-site inspection is possible. Kledpfx Ahjznc Rls Ajw

Condition: used, functionality: fully functional, machine/vehicle number: 3910010947, counter reading (black): 3,310,691, With this offer, you are purchasing a used “Xerox Versant 4100 Press” color production system. Items for sale: 1 x Xerox Versant 4100 Press with the following features: Includes Paper Deck A-CF03/A-CF04 Includes Finisher A-GW04/A-GW07/LCS-1/A Includes NX PRM-24/EX-P4100 Fiery - Not functional Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 9,571,697 pages Color: Approx. 8,874,258 pages Black: Approx. 697,439 pages Condition: Klodpfx Ajzmpbneh Ajw This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for functionality; a test printout can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: used, functionality: fully functional, machine/vehicle number: 3910010947, counter reading (black): 3,310,691, A Xerox D125P digital color production system is offered for sale. Item for sale: Kljdpfxezmpbhs Ah Aew 1 x Xerox D125P with the following features: - A4 paper tray - Booklet finisher - Fiery SP30-04 (EX125) Counter readings according to audit: - Black: 3,310,691 - Color: 0 - Total: 3,310,691 Serial number of the main unit according to audit: 3910010947 Article/reference number: 50022930 Condition: This offer is for a used device, which may have some signs of wear and tear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping are possible upon request! Before shipping or collection, a functional test will be recorded on video for you. For further information, you can of course contact us personally.

Condition: used, functionality: fully functional, machine/vehicle number: A4EV021000374, counter reading (black): 5,094,962, With this offer, you are purchasing a used black-and-white production system, the “Minolta bizhub PRESS 1052.” Items for Sale: 1 x Minolta bizhub PRESS 1052 with the following features: Includes internal controller Includes FS-532/RU-509 finisher Includes paper tray Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 5,094,962 pages Condition: This listing is for a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: Klsdozmpawspfx Ah Ajw You’re welcome to view the machine during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of the device undergoing a functionality test for you. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, machine/vehicle number: 14800061, counter reading (black): 652, With this offer, you are purchasing a used “KIP 660 MFP” color production system Item for sale: Kodpfxezmpaqs Ah Aelw 1x KIP 660 MFP We can easily configure the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 652 pages Black: Approx. 652 pages Color: 0 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you before shipping or pickup. For more information, please feel free to contact us directly.