Used Projection Welding Machine for sale (67,643)

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots Giedpjv Dxm Ssfx Ahvsu - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Gijdpohpf Iyjfx Ahvsu Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Gjdpjycv Sasfx Ahvoiu Weight: 335 kg As-new condition

Condition: excellent (used), Projection welding machine Brand DALEX Type PM 32-5 Rated power at 50 & duty cycle: 160 kVA Secondary short-circuit current: 80 kA Secondary open-circuit voltage: 9.75 V Electrode force: 215-1,290 daN Single-stroke cylinder - electrode stroke 100 mm Throat: 250 mm with attached control cabinet according to VDE 0100 Main switch Gijdpfxowhz Ils Ahvsu Synchronous welding control MPS 200 Example photo Machine is currently being refurbished

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Gsdpfxshubgze Ahvoiu Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Giedpfx Ahoguvtdoveu Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Gisdpoguvtajfx Ahveu Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: good (used), functionality: fully functional, machine/vehicle number: BMP 6-5, throat depth: 250 mm, overall weight: 650 kg, arm spacing: 590 mm, nominal power (apparent): 80 kVA, Manufacturer: Nimak Model: BMP 6-5/80 Description: Projection welding machine Rated power: 80 kVA Max. force: 1100 daN Gisdpfx Aev N U Tljhvou Throat depth: 250 mm Opening: 350 - 590 mm Weight without control cabinet: 650 kg

Condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs, spot welding machine, projection welding machine, projection welding machine -Manufacturer: Aro, projection welding machine, spot welding machine, water-cooled, type N601 -Welding power: 65 kVA -Welding control: Aro 25-002-2 Gedpfohx E T Uox Ahveiu -Transport dimensions: 1000/510/H1720 mm -Weight: 538 kg

Condition: excellent (used), overall weight: 955 kg, projection welding machine execution B/DHZF projection 350 mm Make DALEX Type PMS 34-4 rated power at 50 % ED: 160 kVA Sec. short-circuit current: 99 kA Sec. open-circuit voltage: 5.8 - 9.74 V electrode force: 140-2,040 daN Giodpfx Ahep H T Adovsu with 4-step switch add-on control cabinet according to VDE 0100 with main switch Synchron-100 program control MPS 8043/1

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Throat depth: 250mm --- Weld control: Digit 8 --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock Gjdpfoxyqn Ajx Ahvoiu

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. Gsdsza T A Rspfx Ahvoiu We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: good (used), *DESCRIPTION* Professional ARO AROMASTER II welding set, year 1997. Medium-frequency spot welding unit, 1000Hz, delivered complete with its 2 original tools. Gedpfjzczw Isx Ahveiu ARO Château-du-Loir brand = a global reference in resistance welding. Robust equipment, spare parts always available. *LOT COMPOSITION* 1. *AROMASTER II Generator* Code ZU182000 - No. 9713221A523 - Year 1997 400V Three-phase 50Hz - 20.7 kVA at 100% / 29.3 kVA max Integrated water cooling - NF A 82-020 standard 2. *ARO YB200450 X-Gun* No. 9712211B669 - Year 1997 Water-cooled - 450mm copper arms - Force ∼300 daN 3. *ARO YB200550 Dent Puller Gun* No. 9712211B640 - Year 1997 For welding pull studs Ø2.5mm *TECHNICAL SPECIFICATIONS* Brand: ARO - Made in France Technology: Medium frequency 1000 Hz Power supply: 400V Three-phase 32A minimum Welding current: ~10,000 A Weldable thicknesses: Steel 0.6 to 2.0 + 2.0 mm Control: Digital - Time/intensity adjustment Cooling: Water - Integrated unit Generator weight: Approximately 110 kg - On castors *CONDITION & WARRANTY* Set in good overall working condition. Tested in the Gortina workshop: cycles with gun and puller OK, pneumatic pressure OK, no water leaks, thyristors OK. Original ARO yellow paint. Cables and wiring in good condition. *ADVANTAGES* 1. *2-in-1 Set*: Spot welding + inertia dent pulling. One generator only. 2. *ARO Reliability*: Industrial construction. National after-sales service. 3. *Economy*: Equivalent new cost 2026 > €15,000 (excluding VAT). 4. *Ready for use*: Generator + gun + puller, original 1997. *APPLICATIONS* Traditional automotive bodywork, vehicles before 2010, vans, 4x4s, restoration of old vehicles. Dent pulling without paint. Training centers.

Condition: good (used), Year of construction: 2000, *TECHNICAL SPECIFICATIONS* Make / Model ARO MC30CSC Year 2000 Serial No. 0001122B122 Type Fixed spot welding machine with swan neck Power Supply 400V Three-phase 50Hz - 50A Power 21 kVA at 100% / 78 kVA max Max. Welding Current 19,000 A Clamping Force 358 daN 358 kg Swan Neck Depth 550 mm Arm Spacing 174 to 489 mm Cooling Water 5 L/min - 6 bar Control ARO Micro 2X16 III digital Multi-parameter programs Weight 270 kg Standards CE - NF A 82-020 - Made in France Gsdpfxszczwhe Ahveiu *SUPPLIED EQUIPMENT* - Complete machine on chassis - 1 pair of mounted, water-cooled copper arms - Micro 2X16 III digital control with key - ARO operating manual *CONDITION* Machine in excellent working condition. Tested and inspected in the workshop: welding cycles OK, pressure build-up OK, no water leaks, thyristors OK. Original yellow ARO paint. Ready for production. *ADVANTAGES* 1. *Power*: 78 kVA for welding steel up to 3+3 mm and stainless steel 2+2 mm. 2. *ARO Reliability*: Leading brand, spare parts always available. 3. *Modern Control*: Micro 2X16 for precise adjustment of time/intensity/force. 4. *Versatile*: 550mm swan neck for large parts. *APPLICATIONS* Manufacturing of grids, baskets, metal frames, assembly of industrial sheet metal, locksmithing, industrial bodywork.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, type of cooling: air, hose package length: 5,000 mm, welding current (min.): 40 A, welding current (max.): 250 A, Rowac KGL 250-2 – Gas-cooled MIG/MAG Transformer Welding Machine Gedpfx Ahezdaprsvjiu Refurbished, serviced, tested, and ready for immediate use. Please note: This is a trade-in. Specifications: 250 AMP 380 Volt 2/4 cycle 10-step adjustable Spot welding Interval welding Includes: 3-metre welding torch, earth cable with clamp, gas hose, and 5-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, throat depth: 500 mm, – Capacity 35 kVA – Pneumatic Gsdpfx Aex N Nfuohvoiu – Throat depth 500 mm – PX1700ECO control – Documentation – 400V

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser type: fiber laser, laser source manufacturer: Rofin, laser source model: FL40, laser power: 4,000 W, laser wavelength: 1,070 nm, input voltage: 400 V, input current: 40 A, input frequency: 60 Hz, type of input current: three-phase, We offer this Rofin FL40 laser welding machine in very good condition, manufactured in 2017. Nominal power: 4000 W Power range: 10 - 100% Laser beam quality: 3 - 4 (Multi Mode 100 µm) mm·mrad Power stability: ±2% Pulse frequency range: CW - 5 kHz Wavelength: 1070 ±10 nm Maximum possible power (950-1100 nm): 8000 W Maximum possible power (1100-1150 nm): ≤100 W Supply voltage: 3 x 230/400 V ±10% or 3 x 277/480 V ±10% Mains frequency: 50 or 60 Hz Apparent power at the beginning of module life: 12.7 kVA Active power at the beginning of module life: 11.8 kW Current consumption at 400 V at the beginning of module life: 18.4 / CCU: +0.5 A Apparent power at the end of module life: 15.2 kVA Active power at the end of module life: 14.2 kW Current consumption at 400 V at the end of module life: 22 / CCU: +0.5 A Current consumption at 480 V at the end of module life: 18.3 / CCU: +0.5 A Fuses: 40 A If you have any questions or need further information, please do not hesitate to send us a message or call us. Gjdpfxszcf T Ts Ahvjiu

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall. Gjdpfox Ic T Ajx Ahvoiu

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Giedpfxexnqnxe Ahvju

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Gsdpfxjxpf N To Ahveiu Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Insulation class: H, Gijdpfx Ahjh Nvfnjvou Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg

Condition: used, Year of construction: 2000, functionality: fully functional, Compact resistance butt welding machine from IDEAL-Werk (C.+E. Jungeblodt GmbH, Lippstadt, Germany) for joining band saw blades quickly and reliably. The BAS 050-11 is the entry-level workhorse of the BAS series — ideal for workshops, saw doctors, and sawmills that weld narrower carbon and bi-metal blades and need a dependable, low-footprint machine. Built to the usual IDEAL standard: solid German engineering, simple operation, and the kind of longevity that keeps these machines in daily service decades after they leave the factory. Technical Specifications Type: BAS 050-11 Year of manufacture: 2000 Rated output at 50% ED: 4.5 kVA Connected load: 4.5 kVA Open-circuit (welding) voltage: 2.6 / 4.4 V Max. upsetting force: 2.2 kN Primary voltage: 415 V Frequency: 50–60 Hz Fuse protection: 16 A CE marked — Made in Germany Resistance butt welding for clean, strong blade joints Two-stage welding voltage (2.6 / 4.4 V) for flexibility across blade types Compact and robust — built for continuous shop use Steel strip: 6-50 mm Bandsaw for wood: 6-50 mm Metal bandsaw, bimetallic and tungsten alloys: 6-32 mm Hoop knife: 6-30 mm Gijdpfxjzcqn Ne Ahveu Stainless steel bandsaw: 6-30 mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, Laser welding machine with 200-watt laser output - Lamp-pumped - Spot welding machine for extremely fine welding applications - Suitable for jewelry, optics, precision engineering, etc. - Welding spot size from 0.1 to 3mm - For virtually all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshair - Adjustable current, pulse width, repetition rate, and frequency via control panel - Includes shielding gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200-watt output - External cooling - Power supply: 230V / 32A Please also note our attractive leasing and hire-purchase offers. Machine dimensions approx.: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approx. 150 kg Giodpfxjflrnie Ahvju

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Gijdpfx Ajzbvn Eohvsu Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2021, operating hours: 227 h, condition: excellent (used), functionality: fully functional, The HF machine was used for welding PVC tarpaulins. Maximum welding area: 4 cm x 100 cm. Godpfxezbb Tmo Ahveiu Current welding stamp sizes: 2 cm x 100 cm and 2 cm x 50 cm, in use since 02/2022.