Used Pub Brewery for sale (134)

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Iodpfx Agoy Nm I He Astn Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Condition: excellent (used), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, Equipment: compressor, documentation/manual, High-end (!) Austrian Brewery, newly purchased in 2017 directly from the owner. It has been used less than 100 times ever since because it is positioned at a remote location away from the main brewery. It has been maintained very well, ready for inspection. Ideally for brew-pubs. It is 5HL machine but can do 2 brews simultaneously, so effectively it can be considered a 10HL machine. It has 4 Uni-tanks of 12 HL and all the necessary equipment, such as cooling, to make it a turn-key brew installation of a premium quality. Also all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Original documentation available, in German, showing that all equipment was purchased at the Labu factory. Isdezz Rlwopfx Ag Aetn This whole set would currently cost approx. 240.000€ (ex VAT, ex works). Delivery possible per direct after dismantling. We could provide a proper instruction / training by one of our senior brewers. Current asking price is approx. 135K€, ex VAT ex work but including instruction. The brewery is located in the Amsterdam area, the Netherlands

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Itodpfx Agsztpxms Aen

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 Itedpfoz Sk Aqsx Ag Asn - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, For sale: a brewing system consisting of a mashing/lautering and brewing vessel with a whirlpool. The vessels are mounted on a frame; the brewing system is very robustly constructed and was custom-made several years ago. It has only been used for 2 years. It features a touchscreen control panel for two pumps, some valves, temperature, and the mashing and brewing program. Iedpfx Aszq Uq Njg Aotn The vessels are heated by a steam generator. The brewing system is very efficient and allows for the production of almost any type of beer – from low extract beers to very high extract beers, even up to 30 Plato (one of the beers produced in the brewery), strongly hopped beers, and beers with various additions or complex grain bills. The machine is very easy and quick to operate; only one person is needed. It allows for the effortless production of 2 batches per day (16 hl +), and thanks to the two independent pumps and vessels, it is possible to start mashing the second batch while the first is still in the boiling phase.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, Line is consisting of: Dreher 2 vessel brew system Type: KBA500 Year: 2006 Kettle: 550 litres Heating: 42 kW Itodpfxsz Hlclo Ag Aen Controls KBA basic 3x Dreher fermenting tanks Type: GW500 Year: 2006 Content: 520 litres With Dreher ZKV120 cooling 3x Dreher / Brovarni dispensing tanks Type: 500 L CCT Year: 2017 Content: 500 litres 1x Dreher brite tank Content: 1000 litre 6x Dreher Kombi-tank Type: KT500 Year: 2006 Content: 500 litres 5x FIB beertanks Type: 70200503 Year: 2022 Content: 540 litres Auxiliary equipment a.o. - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cooling water tank - bottle washing station - bottle filling machine - corking device - 45x 20 litre kegs - working table - double sink

Condition: used, mileage: 300,224 km, first registration: 09/2003, overall weight: 37,000 kg, fuel type: diesel, color: green, axle configuration: 4x2, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, Year of construction: 2003, operating hours: 1,800 h, Disab Centurion P210/9 Year: 2003 Iedoz Ezbnspfx Ag Aotn Vacuum and blowing system

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price Isdpfx Ajzp Hkxjg Ajtn POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Ijdpfx Aozza Disg Ajtn Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, axle configuration: 3 axles, first registration: 09/2008, suspension: air, tire size: 385/65 R22.5, color: other, General Information Year of manufacture: 2008 Axle Configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear axle 2: Aluminum rims; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Rear axle 3: Aluminum rims; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 4,890 kg Payload: 33,110 kg Itedpszgmazsfx Ag Aon GVW: 38,000 kg Condition Damage: None

Condition: ready for operation (used), functionality: fully functional, mileage: 64,717 km, power: 55 kW (74.78 HP), first registration: 09/2017, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 9,322 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: ES1786, Equipment: additional headlights, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in excellent condition formerly a municipal/government vehicle registered as a self-propelled working machine (40 km/h) upon request, we will perform a major engine inspection including timing belt, water pump, oil and filters free of charge at the time of sale 5640 sweeping operating hours 9322 total operating hours 64,717 kilometers 4x4 all-wheel drive right-hand side portal arm with weed control function (requires a special disc brush) like-new mixed brush set new water spray nozzles external control for the sweeping material container rear view camera and suction shaft camera sweeping width up to 2270 mm sweeping material container made of stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg permissible total weight 3500 kg length: 4510 mm / width: 1210 mm / height: 1970 mm driving speed 0-40 km/h working speed 0-24 km/h noise reduction package engine: water-cooled 4-cylinder VW industrial diesel engine fuel tank approx. 60 liters hydrostatic all-wheel drive 2-circuit high-pressure hydraulics circuit 1 (front) 0–50/0–70 l/min 225 bar - circuit 2 (rear) 0–20/25/30 l/min 195 bar hydraulic service brake via foot pedal Itodpfezk T S Ejx Ag Asn cabin with air-suspended comfort driver's seat air conditioning / heating water treatment system hydrant connection dosing system other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows and lawnmowers (not included in the scope of delivery) errors, changes and prior sale reserved we sell exclusively according to our general terms and conditions and exclude any warranty. errors, changes and prior sale reserved we are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by appointment, outside these opening hours telephone appointments are possible. we would be happy to accept your existing used equipment/vehicle in part exchange. sales to commercial businesses and exporters will be given priority; this applies to our entire vehicle inventory. the above information is non-binding; errors/changes and prior sale subject to change!

Condition: new, functionality: fully functional, color: green, brakes: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, mast type: other, Equipment: low noise, TICAB Manufacturer Road Painting Machine for Professional Marking Applications The TICAB road painting machine is designed to provide efficient and accurate marking solutions for modern infrastructure needs. This professional road striping equipment allows contractors and maintenance specialists to create clear and durable markings on highways, urban roads, parking areas, airports, industrial facilities, and other paved surfaces. Key Benefits: ✔️ Suitable for lane separation, parking layouts, and traffic guidance markings ✔️ Excellent choice for construction companies, municipalities, and road service providers ✔️ High-quality road striping equipment for professional projects ✔️ Accurate paint distribution and consistent marking lines ✔️ Simple operation with minimal maintenance requirements ✔️ Heavy-duty design for regular and intensive use Suitable Applications: Itedpfsx U Arfjx Ag Ajn • Highway and street marking • Airport surface marking • Pavement painting projects • Industrial area marking • Lane separation lines • Parking lot striping The TICAB professional marking machine helps improve work efficiency, reduce application time, and achieve precise, long-lasting road markings for various construction and maintenance tasks. Contact us for product specifications, commercial offers, and international delivery solutions.

Condition: ready for operation (used), functionality: fully functional, mileage: 53,179 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,699 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 7,381 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: ES1985-2, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in top condition formerly a municipal/authority vehicle Itsdpfszk Ukiex Ag Aon registered as a self-propelled working machine (40 km/h) upon request, we will perform a major engine inspection including timing belt, water pump, oil, and filters free of charge at the time of sale. 4297 sweeping operating hours 7381 total operating hours 53179 kilometers 4x4 all-wheel drive - hydrostatic all-wheel drive including Kif snowplow, type CM 1600, 1500 mm wide (like new/never seen snow) or alternatively with Kif front sweeper, type CM 1600, 1.300 mm wide, built in 2019 (like new/never seen snow), not shown in the pictures including Gmeiner salt spreader, type Husky 500V FS with support legs (like new/used twice for testing) like-new mixed bristle brush new water spray nozzles external controls for the sweeping material container rearview camera and suction shaft camera sweeping width up to 2270 mm sweeping material container made of stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg permissible total weight 3500 kg length: 4510 mm / width: 1210 mm / height: 1970 mm driving speed 0-40 km/h working speed 0-24 km/h noise reduction package engine: water-cooled 4-cylinder VW industrial diesel engine fuel tank approx. 60 liters hydrostatic all-wheel drive 2-circuit high-pressure hydraulics, circuit 1 (front) 0–50/0–70 l/min - 225 bar, circuit 2 (rear) 0–20/25/30 l/min - 195 bar hydraulic service brake via foot pedal cabin with air-sprung comfort driver's seat air conditioning / heating water treatment system hydrant connection dosing system other applications possible through additional attachments from HAKO, such as sweepers, snowplows, and lawnmowers (not included in the scope of delivery) errors, changes, and prior sale reserved We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. We are also available on Saturdays by appointment. Telephone appointments can be arranged outside of these opening hours. We will gladly accept your current used equipment/vehicle in part exchange. Sales to commercial enterprises and exporters are given priority; this applies to our entire vehicle stock. The above information is not binding. Errors/changes and prior sale are subject to change!

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Iedpfx Agjz E U Die Aetn Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: ready for operation (used), functionality: fully functional, mileage: 32,362 km, power: 55 kW (74.78 HP), first registration: 11/2020, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,950 kg, next inspection (TÜV): 11/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,028 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1650 sweepers and winter maintenance vehicle, first owner Engine inspection including oil, oil filter, and fuel filter will be performed before sale. Machine version with a new pedal system. 1,960 operating hours (sweeping) 4,028 total operating hours 10,568 sweeping kilometers 32,362 total kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Camera system for the suction shaft and rear Includes leaf vacuum hose (rare) Includes Kif snow plow, type CM 1600, 1500 mm wide (like new/never seen snow) or, alternatively, Kif front brush, type CM 1600, 1,300 mm wide, manufactured in 2019 (like new/never seen snow), not shown in the pictures Includes Gmeiner salt spreader, type Husky 500V FS, with support legs (like new/used twice for testing) Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Selectable working speeds 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder Hatz industrial diesel engine Low emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-sprung driver's seat Air conditioning / heating Water treatment system Fire hydrant connection Metering system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweeping brushes, snow blades, and lawnmowers (not included). Errors, changes, and prior sale reserved. We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment. Outside of these hours, telephone appointments can be arranged. We will gladly accept your current used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle stock. Itjdpfxjzmzkbj Ag Asn The above information is non-binding. Errors/changes and prior sale reserved!

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Ijdpfez Dhrqox Ag Astn Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Year of construction: 2010, condition: excellent (used), Complete microbrewery for sale: Brewhouse 10 HL: High-quality brewing pan (Schulz), double-walled with smooth cooking process, lauter tun and whirlpool, complete piping, hoses. Automatic mashing with electrical pannel, control for hot water heating, malt mill, small appliances. Fermentation cellar: Wort cooler, ice water container, 5 open fermentation tanks 10HL, 5 storage tanks 20 HL, 3 serving tanks 10 HL. Wort pump, hoses, temperature control. Precoat filter, yeast pan. Bottle cellar: Fully automatic inline filler, 8 digits, soft wheel, round bottle cleaner Lots of accessories, small parts, hoses, etc. Itodpof Ni Rvofx Ag Ajn For sale as build in. Cranes and loaders for free.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Itodpfx Ageztma Uo Aon Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.

Condition: used, Year of construction: 2008, We are selling one fully functional Schmidt Sweeper Swingo 200 from year of manufacture 2008. Equipped with a VM engine 560/9 delivering 62 kW, dual broom system, Motec reversing camera, passenger seat, directional switch for forward/neutral/reverse, 2 m³ debris container capacity, new TÜV (vehicle inspection), new service, new brushes, and 215R14C Kumho tires. The machine received a new engine approximately 2 years ago. Operating hours: around 800. The machine is ready for immediate use. Further details available upon request. Location: 94491 Hengersberg. Itedpfsyq Au Dox Ag Ajn

Condition: ready for operation (used), functionality: fully functional, mileage: 32,362 km, power: 55 kW (74.78 HP), first registration: 11/2020, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,990 kg, next inspection (TÜV): 11/2026, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 4,028 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: WB843-2, Equipment: additional headlights, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1650 sweepers, first owner Engine inspection including oil, oil filter, and fuel filter will be carried out free of charge upon sale Machine version with a new pedal system 1,960 sweeping operating hours 4,028 total operating hours 10,568 sweeping kilometers 32,362 total kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Camera system for the suction shaft and rear Includes leaf suction hose (rare) Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Selectable working speeds 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder Hatz industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cabin with air-sprung driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg Other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows and lawn mowers (not included) Errors, changes and prior sale reserved. We only sell under our general terms and conditions and with the exclusion of all warranties. Errors, changes and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment. Outside these hours, telephone appointments are possible. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority; this applies to our entire vehicle inventory. Ijdpszmzllsfx Ag Ajtn The above information is non-binding; errors/changes and prior sale reserved!

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia Iedpfjzvqi Sex Ag Aotn - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck, UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader STRATOS S 30 (24), 3.0 m³ stainless steel container Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreader) Rear cover, stainless steel FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Size 2(M) R=Size 3 Itjdpfjyq Ar Aox Ag Ajn Control system Evolution Professional "EP", incl. electric adjustment of the spreading pattern Premium spreading disc "490" (spreading width 2 - 10 m) Ball joint frame for Unimog 405.125 Support feet (4 pcs.), 3 t., crank drive in the center, incl. lateral supports Rotating beacon (1 piece) Warning tape red-white, at the top of the container Marking "Winter service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Flow rate detection with load sensing pump (for V) Location: 93095 Hagelstadt

Condition: used, The device was used in a juice bottling line. The machine is in good working order and ready for operation. Application: It is used for automatically packing various types of containers (glass and plastic bottles, jars, cans, doypack packaging) into collective cartons, boxes, or trays. This machine is very commonly used in the food, bottling (wine, brewery), and chemical industries, as well as in oil production. Capacity: up to 3000 bottles per hour (BPH) Model: Meta Isdpfsz Szz Njx Ag Ajtn

Condition: used, Year of construction: 2015, We are selling a used Bucher Gmeiner spreader, model STA 2000 TC, manufactured in 2015. It includes a control panel and support legs, and has a short shaft (suitable for Lindner, Multicar, etc.). It has a 2 m³ filling capacity and features a twin-screw spreading system. Further details are available upon request. Location: 93095 Hagelstadt. Ijdpfjyq Avbsx Ag Ajtn

Condition: new, functionality: fully functional, color: red, fuel: diesel, brakes: other, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2026, Equipment: air conditioning, fog lights, low noise, TICAB MUM-130 | Universal Municipal Street Sweeper & Vacuum Cleaning Machine Engineered for reliability and productivity, the MUM-130 ensures fast and effective removal of debris while maintaining high maneuverability in crowded urban environments. The TICAB MUM-130 is a high-performance self-propelled municipal street sweeper and vacuum cleaning machine designed for efficient urban cleaning and professional maintenance of public and industrial spaces. Compact, powerful, and eco-friendly, it delivers outstanding cleaning results for municipalities, contractors, and facility management companies. Key Advantages ✔ High-efficiency rotating brushes for thorough surface cleaning ✔ Powerful vacuum suction system for fine dust and lightweight debris ✔ Self-propelled design for maximum mobility and operational independence ✔ Combined sweeping and vacuum system for superior cleaning performance ✔ Compact design ideal for narrow streets and confined urban spaces ✔ Large-capacity debris hopper for extended working cycles ✔ Easy operation with low maintenance requirements Isdpjx U S Iiofx Ag Astn ✔ Eco-friendly solution for modern urban cleaning needs Applications • City streets and sidewalks • Parks, squares, and public spaces • Parking lots and commercial areas • Airports and transport terminals • Industrial sites and warehouses • Roadside and infrastructure maintenance • Residential districts and private complexes Built for Professional Municipal Cleaning The TICAB MUM-130 is designed to meet the demands of modern urban maintenance services. Its powerful sweeping and vacuum system efficiently removes leaves, dust, sand, gravel, and general waste, ensuring clean and safe public environments. Why Choose TICAB MUM-130? • High cleaning efficiency with combined brush and vacuum system • Reliable performance in demanding municipal environments • Compact and highly maneuverable design • Reduced labor costs and increased productivity • Ideal for year-round urban cleaning operations Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB MUM-130 is available for fast production and worldwide shipping.