Used Punching Machine With Belt System for sale (85,217)

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front Dcsdpfx Adev T Anlj Nsg • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: ready for operation (used), * Brand: FINLAY * Model: mobile belt conveyor with screening machine * A-A length: 11.500 mm, * Beltwidth: 650 mm * Dim. Screen: 2000 x 900 mm, 1 deck. * Screen opening: 10 mm. * Power: 11 kW E-motor. Djdpfx Adjywmfnj Nscg

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Djdpfx Ajulc Sqsd Nscg Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Dcjdpeq T N T Tjfx Ad Njg Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm Dcedpfx Aoxdmgved Nsg CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), functionality: fully functional, DESCRIPTION OF MACHINE INCLUDED A LOT BELTS A Löser abrasive belt grinding machine offers the most flexible grinding / linishing on the market today. The combination of basic machine plus a variety of contact arms and attachments offers dozens of possible applications for many different purposes. There are over 20 standard attachments available for this machine allowing it to be used for centerless grinding, internal polishing, grinding of hollow bodies and small radius and turbine blade finishing to name but a few. Fields of application of these abrasive belt grinding machines include: *Foundries *Medical engineering *Aircraft industry *Vehicle construction *Mechanical engineering *Specifications Abrasive belt grinding machine, type KS 350 *Grinding belt length 3000-4000 mm *Grinding belt width 5 - 75 mm Loser KS 350 Belt design features:: *Drive motor 4 kW (standard design) with fitted variable speed inverter drive *Drive wheels of 100 - 280 mm diameters = 3 - 46 mtr./sec. belt speed *Mechanical belt tensioning *In case of a belt break the drive is immediately disconnected. Therefore, the risk of an accident is eliminated. *Contact disks of 50 - 400 mm diameters, with a wide choice of grinding attachments for any kind of surface finishing * DC injection breaking unit fitted. *Maintenance-free, dust-proof contact disk bearing with permanent lubrication, contact disk change in less than 1 minute. *LÖSER abrasive belt grinding machines open up new fields of application for belt linishers that in the past could not be processed with normal belt grinders. *When using 3 to 4 m long grinding belts, the 3-contact wheel system ensures the constant and optimal belt speed no Dedpfx Ajwxrnwsd Njcg matter which contact disk diameter is being used. *Driven by the motor pully, the three pully system allows the belt which is constantly tensioned a higher degree of torque at the same motor rating. *When working with Scoth-Brite disks or belts or with felt polishing belts, the drive can be infinitely adjusted even for speeds as low as 3 mtr. /sec. Due to the advantages offered by the 3-contact point system, any required surface finishing is possible using contact disks from 50 to 400 mm, contact rolls or contact rollers from 15 to 50 mm, contact belts of 6 or 30 mm width, polishing brushes, polishing disks and polishing belts.

Condition: ready for operation (used), functionality: fully functional, outer diameter: 3,500 mm, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Cylinder diameter: 3,500 mm Cylinder height: 5,000 mm Discharge diameter: 200 mm Roof shape: Conical 15° Cone-shaped floor, apex angle: 60° EQUIPMENT Lifting lugs Hinged manhole, 600 mm diameter with safety grid Mount for pressure/vacuum relief DN80 PN10 nozzle for filling line Nozzle with blind flange Dcjdpfx Adsy Hiuws Nog Nozzle for overflow Nozzle for level switch

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Dcedpewz Ukysfx Ad Neg Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: Dcsdpfouzv Tzex Ad Neg rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), APPLICATION BELT with VIBRATING feeder Used machine A pneumatic slide valve from the vibro-feeding roller controls the dosing onto the application belt Overall dimensions: 2700 x 1300 x 2800 mm Strap size 2400 x 140 mm Throat size: 1000 x 1300 mm Dcsdpfx Adstp Hd Uo Nog Transport speed: 15 m/min

Condition: good (used), Year of construction: 2002, Brand: MABO Type: Participate Machine no: 76 Year of manufacture: 2002 - Long belt sander with electric raising/lowering of the work table, sanding shoe Tech info: Work table 2000x800mm Sanding belt dimension 6060x150mm 2 speeds on the sanding belt Size for transport: Length: 320 cm Width: 130 cm Dcedpfopitqmsx Ad Neg Height: 160 cm Stock no: 2001159BXM

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Dcsdpfx Adsrbyrps Neg Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Colour: Grey Empty weight: 580 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4077950107003 Djdpoymfbfjfx Ad Necg - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Dcsdsy Nz R Nopfx Ad Nsg Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 82070430, Offer 26025 Technical specifications: - Abrasive belt dimensions approx. 200 x 1800 mm - Roller diameter 150 mm - Abrasive belt speeds approx. 5 / 10 / 20 / 30 m/sec. - Speed xxxx rpm - Drive 400 V / 2.2 kW - Fine adjustment of abrasive belt - Belt position infinitely adjustable horizontally and vertically Djdey N T Iaepfx Ad Nscg - Working height approx. 1000 mm - Movable support - Required space approx. W 800 x H 1050 / 1800 x D 1200 mm - Weight approx. 300 kg

Year of construction: 2001, condition: ready for operation (used), An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible. Dcodpsy N Uw Njfx Ad Njg

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, MarelliGenerator Alternator Dcodpfx Aswx H Hzsd Nsg Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use Low maintenance – no chemical batteries

Condition: excellent (used), mileage: 562,500 km, first registration: 12/2000, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 620 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 7,100 kg, Year of construction: 2000, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, trailer coupling, = Additional Options and Equipment = - 2 sleeping bunks - 600-liter diesel tank - Aluminum fuel tank - Heated exterior mirrors - Driver comfort seat - Differential lock - High beam headlights - Speed limiter - Hydraulic system - Intarder - Air horns on cab roof - Radio/CD player - Beacon lights - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF Intarder - ZF16 manual transmission - Tow hitch = Remarks = HEAVY DUTY, GOOD CONDITION DAF FAS95-480XF SPACECAB (EURO 3) 6x2 STEEL/AIR SUSPENSION CHASSIS WITH ZF16 MANUAL GEARBOX, ZF-INTARDER & AIR CONDITIONING!! 480HP, EURO 3, 6-CYLINDER ENGINE!! ZF16 MANUAL TRANSMISSION!! ZF-INTARDER!! STEEL SUSPENSION FRONT AXLE!! LIFT AXLE!! P.T.O.!! AIR CONDITIONING!! ETC.!! HUFFERMANN HL26/63 20,000 KG HOOKLIFT SYSTEM (6.00 METERS LONG)!! TRUCK IS IN GOOD WORKING & DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE DAF 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,580 cc Djdpouy I Afsfx Ad Nocg Transmission Transmission: ZF16 MANUAL GEARBOX + ZF-INTARDER, 16 gears, manual Axle Configuration Brakes: Drum brakes Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Steering axle; Left tire tread: 30%; Right tire tread: 30%; Suspension: Leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Inner left tire tread: 50%; Outer left: 50%; Inner right: 50%; Outer right: 50%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Lift axle; Max. axle load: 7,100 kg; Left tire tread: 50%; Right tire tread: 50%; Suspension: Air suspension Weights Unladen weight: 11,950 kg Payload: 14,040 kg Gross vehicle weight: 26,000 kg Functional Body maker: HUFFERMANN HL26-62 20,000 KG HOOKLIFT SYSTEM Condition Technical condition: Very good Visual condition: Very good Further Information Contact Sales Department or Erik Engel for more information.

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer Dcjdpfxoh Dwqhs Ad Nog SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 54,221 h, machine/vehicle number: A0150A0211, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Rexroth, controller model: IndraMotion MTX, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: TruFlow 2700, laser hours: 11,836 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,540 mm, travel distance Y-axis: 1,370 mm, type of cooling: water, compressed air connection: 8 bar, overall weight: 24,000 kg, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, foot remote control, quick-change device, safety light barrier, We are offering this ready-to-use Trumpf TruMatic 7000 K02 1300 laser punching machine, year of manufacture 2012. Operating hours: 54,221 h Laser hours: 39,018 h Laser on: 11,836 h Punching force: 220 kN Laser power: 2,700 W Travel range - X: 2,500 mm Travel range - Y: 1,250 mm Cutting capacity (mild steel): 8 mm Cutting capacity (stainless steel): 8 mm Cutting capacity (aluminum): 6 mm Machine weight approx. 24,500 kg Dimensions: 8,000 x 6,750 x 2,330 mm Standard equipment: - Brush tables - Linear tool magazine and clamps Dsdpfxoy Nbrgo Ad Njcg - 21 tool stations, 4 clamps - Foot switch for closing clamps - Flap for punched parts 500 x 500 mm incl. sensor - Fast flap for laser parts 500 x 500 mm incl. sensor - Scrap container - ContourLine - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejector cylinder for laser parts - Liftable laser cutting support - Slag cone detection TRUMPF laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device with bus connection - ControlLine Punch head: - Electro-hydraulic punch head - Hydraulic single tool holder with 360° rotation - Programmable stripper with adjustable pressure - Tool length compensation - Punch spray lubrication - Punch slug extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control based on Rexroth IndraMotion MTX - 15" TFT color display - Remote service via internet - Auto shut-off Data transmission: - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam light barriers - Hydraulic quick shut-off - Uplift detection - Calculation of fill level height in punching console Programming: - Advanced workshop programming Additional features: - Active die - MultiTool function - MultiBend function - MultiShear function - Thread forming function - Marking function - Deburring and roller technology function - Die spray lubrication - Additional cylinder - Toolmaster with 70 tool positions - Conveyor belt for punch scrap incl. waste container - Vibration-damped installation If you have any questions or require further information, please feel free to send us a message or call us. The seller is not liable for typographical or data transmission errors. The machine’s visual condition, technical status, and wear are in accordance with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Control: CNC control LABOD with graphics Dedpfxoy N Dwrs Ad Njcg Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 802977, travel distance X-axis: 1,020 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 240 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 60,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total width: 1,900 mm, total length: 2,200 mm, overall weight: 1,000 kg, DATRON M8A CNC Machining Center/Machining System - X-axis travel: 1020 mm Dcodpfoy Iytmjx Ad Njg - Y-axis travel: 800 mm - Z-axis travel: 240 mm (with tool changer, 700 mm usable on Y-axis) - Equipped with precision high-frequency spindle, speed range: up to 60,000 rpm - With direct shank clamping - Includes a wealth of accessories - Supplied with an additional plate, plate dimensions: 460 x 250 x 20 mm - Comes with milling cutters and drills, technical documentation, a dividing head, and a small tailstock, three-jaw chuck diameter: approx. 125 mm Note: The item must be picked up on a confirmed date between 16.06. and 18.06.2026, to be coordinated in advance. FCA D-22085 Hamburg – loaded onto truck

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Dsdey Nnakopfx Ad Nocg

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002650004, total height: 3,170 mm, ram adjustment: 60 mm, installation height: 270 mm, table height: 1,300 mm, total width: 2,875 mm, total length: 2,875 mm, drop-through hole in table: 150 mm, table length: 1,250 mm, table width: 550 mm, pressing force: 50 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 60 mm, clearance between the columns: 1,290 mm, working width: 1,250 mm, distance between side stands: 260 mm, distance between stands: 1,690 mm, overall weight: 9,900 kg, punching force: 50 t, RASTER punching system RST 500-1250 DH with soundproof cabin and tool monitoring. The machine is in good condition. Stroke rate: 50 – 800 spm. Previously operated in single-shift mode. The machine can be inspected under power. Price on request. Dedpfoyyvgtox Ad Nscg

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Dcjdjyyppbspfx Ad Nog