Used Röcher Rep 100.01 Sz for sale (879)

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Hedpjyupulofx Ap Honn Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 30,000 kg, Equipment: foot remote control, 30 tons lifting capacity, self-centering, new 380V Hand and foot remote control Rotational speed 100 - 1000 mm/min. Diameter range 600-4500mm Drive wheel diameter 350mm x width 180 Material heat-resistant PU, non-slip Dimensions: 2350 x1460 x 1050 Double drive synchronous Hnjdpewrpfgsfx Ap Hon

Condition: repair required (used), Year of construction: 2003, REP rubber injection press Hedpfxjizi H Ho Ap Henn 25 Tons Year : 2003 The 4 columns are to be changed (9000€ of expenses)

Condition: used, Year of construction: 1975, Technical details: table diameter: 320 mm table height: 50 mm rotation movement: 360 Grad passage inside table: Ø 40 mm weight of the machine approx.: 73 kg space requirements of the machine approx.: L:0,63xB:0,53xH:0,14 m round table movement via manual wheel machine operation possible T-slot: 3x long and 1 x transverse - a=18mm Hodpsu Nkpmofx Ap Henn - b=30mm - h=29mm - c=12mm *

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 466EIF712N14 / V47Y10D94502002, clamping force: 1,800 kN, Two REP injection molding machines with platen dimensions 510 x 430 mm, clamping force of 180 t, and injection capacity of 670 cm³. The first machine requires piston repair and seal replacement. The second machine is missing the hydraulic pump, pressure control valve, and control program card. Hedoyb Rw Uepfx Ap Hsnn

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 571 EIT 9106/1149, clamping force: 2,500 kN, Injection molding machine REP S, floor dimensions 500 x 630 in working condition with clamping force 250t and injection capacity 968 cm3 Hnsdpfx Asyb Icbep Hon

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Table dimensions: 850 x 650 mm Light curtain control system Hnedpfx Asx Sw Iisp Hsn Next mandatory inspection: February 26 Clamping pin lock in the ram Rapid approach speed: 274 mm/s Working speed: 20/10 mm/s Return speed: 273 mm/s Drive power: 30 kW Operating voltage: 380 Volt/50 Hz Max. fuse rating: 100 A

Condition: like new (used), Year of construction: 2020, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, number of injections: 1, Excellent rubber injection moulding machine in mint condition, year 2020. Very few operating hours, in mint condition. Hnodjtu H Stjpfx Ap Hsn Closing force 600 tons Injection volume 2500 cc Heater blades 1200 x 1300 mm FIFO injection system 2500 bar Core lifting moving plate Core lifter fixed plate Data backup on CF card Energy reduction by servo pump control

Condition: new, Year of construction: 2024, Magni Work Platform REP2-4.5U with Manitou Quick Attach Adapter – 3 units available Errors and prior sale excepted. Internal vehicle number: R67 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Hnjdpexmqw Dsfx Ap Hon

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Hnsdpfx Apowztq Eo Hon Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 9,5 t Hnjdpfx Ajzcnq Ijp Hon

Condition: used, maximum load weight: 24,660 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 09/2015, next inspection (TÜV): 09/2025, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,540 mm, KRONE SZ STEERING AXLE THERMO KING BPW DUOPLEX ----VEHICLE HISTORY * GERMAN VEHICLE * TOTAL OPERATION HOURS: 11,172h * VIDEO AVAILABLE ON REQUEST * SP UNTIL 03/2026 * MOT UNTIL 09/2025 VEHICLE EQUIPMENT * TYPE: SZ * REFRIGERATED BOX * 2 AXLES * THERMO KING SLXe 300 WHISPER Hnsdowb T E Nepfx Ap Hjn * DUOPLEX STEEL * BPW AXLES * AIR SUSPENSION * STEERING AXLE WITH LINKAGE * PORTAL DOOR * DISC BRAKE * EBS * ABS * ALB * TOOLBOX * LENGTH: 13.40 m * Width: 2.48 m * Height: 2.54 m * Gross vehicle weight: 34,000 kg * Unladen weight: 9,340 kg * Payload: 24,660 kg * Tire size: 385 / 65 R 22.5 ---- * Export sales only with a deposit of 500 - 2,000 euros. * Export sales only with a deposit of 500 - 2,000 euros. ----Export declaration required for customs clearance within 10 minutes. (AUTHORIZED EXPORTER) 5-DAY, 30-DAY LICENSE PLATE AND 17-21-DAY AUSTRIAN LICENSE PLATE EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA EMAIL VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors, and advance sales! You can find more vehicles on our website: Sales are subject exclusively to our terms and conditions - see website Important note? Important information: Despite careful review of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of contract initiation. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, maximum load weight: 23,300 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 02/2015, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 86 m³, Equipment: ABS, Krone SZ Box Trailer with Tail Lift, Disc Brakes Internal Ref. No. for Inquiries: 0326217 * General condition: very good * ABS * BPW axles * 2 axles, air suspension * Disc brakes * Wooden wear-resistant floor * Tail lift: Dhollandia, load capacity up to max. 2,000 kg Hsdsyxikcjpfx Ap Hjnn Cargo Area Dimensions: * Cargo length: 13,600 mm * Cargo width: 2,480 mm * Cargo height: 2,500 mm Tires: * 1st axle: 385 / 65 R22.5, 20%, air suspension * 2nd axle: 385 / 65 R22.5, 20%, air suspension ---- Price: €9,900 + 19% VAT For further inquiries, you can reach us at the following phone numbers: We speak: German, English, Polish, French, and ???? Subject to errors, omissions, and prior sale.

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm Hnedpfx Aocxxrrep Hon weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: used, axle configuration: 2 axles, first registration: 04/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: white, Year of construction: 2018, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 40%; Reduction: single reduction Rear axle 2: Tire tread: 70%; Reduction: single reduction Unladen weight: 6,860 kg Payload: 25,140 kg GVW: 32,000 kg Body brand: Krone Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Hjdpfx Ajza Akqop Hjnn Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 1 axle, first registration: 04/2016, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,660 mm, total length: 14,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,960 mm, color: other, Year of construction: 2016, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Payload: 23290 kg, Tare weight: 8710 kg, Gross vehicle weight: 32000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2016, Side wall material: Plywood, Axle type: BPW, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift size: 250 x 190, Battery for ramp = Additional Information = General Information Cabin: Day cab License plate: OP-17-GG Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 10 mm; Tire tread depth right: 11 mm Weights Tare weight: 8,710 kg Payload: 23,290 kg GVWR: 32,000 kg Functional Tail lift: Dhollandia, Rear door, 2000 kg Loading platform height: 125 cm Environment Emission class: Euro 0 Maintenance Hnjdpfx Apjy U E Ato Hjn APK (Technical Inspection): valid until 07.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Hnodpfeyxfqrex Ap Hjn Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm Hnodpevb I Itofx Ap Hon ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach Hedpfx Asy Spuuop Henn total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: like new (used), Year of construction: 2010, operating hours: 76,482 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Hedpfxsy Rpq Te Ap Henn Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: excellent (used), functionality: fully functional, empty load weight: 8,940 kg, maximum load weight: 23,060 kg, overall weight: 32,000 kg, first registration: 04/2013, loading space length: 13,400 mm, loading space width: 2,400 mm, loading space height: 2,450 mm, Year of construction: 2026, Krone TKS SZ/Carrier Maxima 1300 • Manufacturer: Krone Hsdeyxqt Espfx Ap Honn • Model: TKS • First registration: 04/2013 • Internal dimensions: - Length: 13.40 m - Width: 2.40 m - Height: 2.45 m • Rear axle with steering function • Refrigeration unit: Carrier Maxima 1300 • Cooling down to -30°C • External dimensions: - Length: 13.86 m - Width: 2.60 m • Kingpin: 8 cm • Fifth wheel height: 1.19 m • Unladen weight: 8,940 kg • Payload: 23,060 kg • Gross weight: 32,000 kg • German vehicle • German documents • Immediately operational This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typographical mistakes excepted - Sale under our general terms and conditions.

Condition: used, Year of construction: 2019, functionality: fully functional, turning length: 1,550 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, type of input current: three-phase, overall weight: 19,650 kg, Equipment: rotational speed infinitely variable, We offer this used DMG MORI NTX2500/1500SZ NTX2500-1500 SZ with full options and cycles, year of manufacture 2019. Machine type: NTX2500/1500SZ Serial number: NTX25181202 Year of manufacture: 2019 Factory ID: 1 Catalog number (Diagram No.): NTX25181202 Weight: 19,650 kg Rated power: 93 kVA Current at full load: 269 A Main fuse: 350 A Phase: 3 Frequency: 50 Hz AC voltage: 400 V DC voltage: 24 V Supply voltage: 200 ±10 V Short-circuit current: 5 kA Maximum motor current: 113 A Hodpfxoy H D H Ue Ap Honn If you have any questions or require further information, please contact us by message or phone.

Condition: excellent (used), Year of construction: 2011, I sell the universal top multiple boring machine with milling for repair works Plug Repair RILESA Rep.-Borem., year 2011. Hnodpfx Aju N T Skep Hjn 4 Top drilling spindles 1 Grooving moulding head Very good condition. Available immediately.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 04/1978, total length: 12,350 mm, total width: 2,500 mm, suspension: steel, tire size: 245/70R17.5, Year of construction: 1978, Van Hool Low Loader – 3 Axles – Ramps – Extendable Year of Manufacture: 12-4-1978 VIN: 3899 Registration: OX-84-88 APK/TUV: Extendable Steel suspension Loading ramps = Further information = Axle Configuration Tyre size: 245/70R17.5 Suspension: Leaf suspension Rear axle 1: Twin tires; Max. axle load: 8,000 kg Rear axle 2: Twin tires; Max. axle load: 8,000 kg Rear axle 3: Twin tires; Max. axle load: 8,000 kg Weights Unladen weight: 8,280 kg Hjdpfx Apsyrrupo Hsnn Payload: 30,720 kg Gross vehicle weight: 39,000 kg Condition Technical condition: Good Visual condition: Good Identification Registration number: OX-84-88

Condition: used, Year of construction: 2015, functionality: unexamined, input voltage: 230 V, type of input current: AC, laser power: 20 W, door opening width: 800 mm, scan area length: 1,000 mm, scan area width: 450 mm, input current: 16 A, laser wavelength: 1,050 nm, working height: 303 mm, input frequency: 50 Hz, working width: 1,000 mm, We are offering this used Trotec Speedmarker 1300 20 Watt/SM1300 SZ SX SY industrial laser marking machine, year of manufacture 2015. Serial number: M13F-0102 Model designation: SM1300 SZ SX SY Date of manufacture: February 2015 Number of phases: 1~ Voltage: 230 V AC Current: 16 A Frequency: 50/60 Hz Rated power: 1500 W Laser crystal: Yb Laser power: 20 W Laser wavelength: 1050–1090 nm Wiring diagram no.: Speedmarker FL 10-50W Laser diode power: < 0.5 mW Laser diode operating mode: cw Laser diode wavelength: 635 nm Trotec Speedmarker 1300 20 Watt Fiber, year 2015 FEATURES - 20 Watt fiber laser - Pilot laser & Focus Finder Laser - SpeedMark laser software - Industrial PC - Software-controlled X, Y, and Z axes - Working area: 1000 mm x 450 mm Hnjdpfxjy Ecn Io Ap Hsn - Maximum part height: 303 mm (with f = 254 mm lens) - Heavy-duty worktable with T-slot plate - Illuminated working area - RGV rotary axis for round parts Preparation for extraction system (extraction not included in the sale). We also have 2 smaller Trotec models available for sale: Trotec Laser Work Station 20 Watt Laser, year 2010, with rotary axis If you have any questions or require more information, please feel free to send us a message or call us.