Used Röders Tec Rp 800 for sale (14,768)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data Chodevri Nmepfx Ac Dea - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, controller manufacturer: Röders, table width: 700 mm, table length: 900 mm, spindle speed (max.): 36,000 rpm, operating hours of spindle: 100 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center Röders Tec RP 800 Year of manufacture: 2005 Control: Röders Tec Chedey Rgaljpfx Ac Dsa Spindle speed: 35,000 rpm Spindle has been overhauled – approx. 100 hours run time Drive power: 17 kW Tool holder: HSK 50 Number of magazine slots: 30 Internal coolant supply: 20 bar X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Equipment: Chip conveyor Coolant system 3D probe Electronic handwheel

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. Chedpfxexcvgio Ac Dea This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Weight: approx. 7000kg Dimensions: 4210x2350x2600 (LxWxH) For further information such as positioning accuracies, see last image!

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Cedpfovvlmcex Ac Djha Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: refurbished (used), functionality: fully functional, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine will be completely overhauled, inspected, and measured in our workshop. The machine will once again meet new machine tolerances! Travel ranges: X450mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer, 42-position - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring including tool cleaning before measurement - Handbox - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - Zero-point clamping system EROWA integrated into the machine table Chedjzmgt Iopfx Ac Doa - Manual chuck control - Automation RC2 pallet changer for 45 Erowa ITS50 pallets - ideal for the production of electrodes An inspection of the machine in operational condition is possible at any time. You can also find information about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Cedpfx Aoy Nzuhec Deha Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz Chsdpfx Ajvt Dwboc Dja The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: used, Year of construction: 2000, functionality: fully functional, Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of manufacture: 2000 Condition: used, under power, control on Windows 7 NEW x-path 600 mm y-path 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm 18-position tool changer Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röders Jobmanager (for processing several workpieces in succession) Probing programs for almost all common geometries Extor extraction system for dusty machining Minimum lubrication Bed path blower Blum measuring laser (for tool measurement length + diameter + contour and breakage control) Tool cleaning (air) Cooling unit for spindle and switch cabinets Cjdpfxoy Efp Us Ac Dsha documentation

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Rapid traverse X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min Work Table Table width: 405 mm Table height: 405 mm Table load capacity: 800 kg Rotary table diameter: 405 mm Spindle Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of tool magazine pockets: 26 Csdpexvybdefx Ac Djha MACHINE DETAILS Control model: RMS6, Version 3.18 Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Input voltage: 400 V EQUIPMENT Documentation/manual Continuously variable spindle speed Chip conveyor Blum laser 3D tool probe Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction unit

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 50,000 rpm, overall weight: 3,800 kg, workpiece weight (max.): 200 kg, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 2,000 mm, Equipment: documentation/manual, Röders RXP300 -overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: X-axis: 320 mm Y-axis: 300 mm Z-axis: 200 mm (height) The clearance height is 390 mm above the machine table without chuck. Machine table: Size: 370 mm x 350 mm Workpiece mass: Maximum 200 kg Axis drives: Highly dynamic linear motors in all axes with integrated cooling. Feed rates: 0 - 40,000 mm/min in all axes. Spindle: HSK25E 50,000 rpm Chodpevvigmofx Ac Dea Tool changer: 42-way Automatic 3D probe Control: Röders RMS6 in current version (2024) A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm Cedpfx Aolzhhcsc Djha - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 11353-24, travel distance X-axis: 500 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 240 mm, table width: 550 mm, table length: 450 mm, overall weight: 5,500 kg, spindle speed (max.): 42,000 rpm, Roders TEC RXP 500 – Precision 3-Axis CNC Milling Center Chedpfx Acewww S So Dea Year of manufacture: 2005 We offer a used 3-axis CNC machining center Roders TEC RXP 500, renowned for its exceptional precision, high dynamics, and surface quality. Ideal for tool and mold making, micromachining, aluminum, and plastics processing applications.

Condition: used, Year of construction: 2007, Milling machine Röders RXP 800 DS, year of manufacture 2007 Cjdpfxjyilxas Ac Doha

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 Cedpfxoy Smvcj Ac Dsha TECHNICAL DATA Travels - X-axis (mm): 475 - Y-axis (mm): 600 - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 EQUIPMENT FEATURES + RC 4 automation + Chip conveyor

Condition: used, Year of construction: 2007, Milling machine Röders RXP 800 DS, year of manufacture 2007 Milling machine Röders RFM 600, year of manufacture 2000 Cedpfx Aeyiln Usc Deha

Condition: like new (used), Year of construction: 2024, Pellet production plant – complete line – fully automated Salmatec press Rematec hammer mill Belt dryer VAI bagging machine Cedpfx Aezg Eudec Doha Cooler Sifter Palletizer Less than 1000 operating hours – certified Option for on-site reinstallation Option for on-site operator training

Condition: refurbished (used), Innotech 3800 REVO Csdpjx Ag E Aefx Ac Doha

Condition: new, Year of construction: 2025, Turbo mill MTR-800 This turbo mill is designed for grinding, crushing, and granulating materials to improve the quality of final separation in subsequent recycling processes. Technical data: - Installed power – 75kW or 90kW - Chamber width – approx. 910mm - Chamber diameter – approx. 620mm - Number of abrasive knives – approx. 89 pcs. - Number of abrasive counterknives – 18 pcs. - Structure mounted on adjustable vibration isolators - Dimensions – 2200 x 1600 x 1550mm - Chamber opening via a manual hydraulic pump - Engine base with a rocker-type tensioner - Weight – approx. 1950kg Chjdpfev I S Uksx Ac Doa - Discharge ends with an orifice of fi-150 - Electrical installation with inverter included in the price.

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Codpfxozachcs Ac Dsha Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2015, suspension: air, tire size: 385/55R22.5, wheelbase: 8,810 mm, color: blue, Year of construction: 2015, Axle configuration Tyre size: 385/55R22.5 Make axles: Valx Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Csdszf Ic Ujpfx Ac Djha Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.800 kg Carrying capacity: 37.200 kg GVW: 41.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: ON-64-VV Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS - Twist-locks = Remarks = 45 FT Only. Empty Weight: 3.800 KG!

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Csdjcw Dg Dopfx Ac Djha Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: used, Year of construction: 2005, load capacity: 2,000 kg, construction height: 410 mm, Telescopic forks ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: very good Description: ISO 2A (41 cm) Capacity 2000 kg Min. 800 mm, max. 1250 mm Width 140 mm Thickness 60 mm Year 2005 Very good condition ID OS439 Cedpfx Ast S Rt Aec Doha

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on selecting the right belt. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. Cjdpfxjylyhdo Ac Doha 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.

Condition: good (used), Welding rotary table Protec KT 2000 A Load capacity 2000 Kg Infinitely variable inclination angle 0 to 120 ° with hand and foot remote control Codpfjpdqfrjx Ac Deha Height horizontal 1200mm Height tilted to middle 1000mm Special design welding current transmission 800 Ampere length 1700mm, width 1200mm

Condition: good (used), functionality: fully functional, Characteristics: * Length: 40 m * Width: 20 m * Height (center): 10.2m * Height (side): 6 m * PVC roof: 850 gr/m2 Chjdpfewbtaysx Ac Dja Description: Aluminum profile building of 800 m² with PVC roof. The building is equipped with a control cabinet, 6 electric air heating units (with temperature control), lighting and several outlets 220/380. Furthermore, there are 2 electric overhead doors. The building is demountable and can be expanded if required.