Used Rabe S-Albatros Ha 140 5-F for sale (108,605)

Condition: used, Year of construction: 2024, Front frame with damping, housing BP-350/351 WS, right-hand version, housing BP-350/351 WS, left-hand version, sliding hexagonal plate, stone guard, tire size 13.0/55-16, long packer arm, lighting. Gsdpfx Acoz Sddzoasuh

Condition: used, Year of construction: 2017, 5-furrow plow, strip body, hydraulic stone protection, hydraulic damping in the frame, combination support wheel, frame pivoting cylinder, furrow guide plates, mechanical working width adjustment in 4 steps up to 50 cm. Gsdez Sc Hzjpfx Acajuh

Condition: new, Year of construction: 2024, 6 shares, body BP-350/351 WS, right-hand version, body BP-350/351 WS, left-hand version, disc harrow, tires 11.5/80-15.3, lighting. Gusdpfx Aez Sddujcash

Condition: new, Year of construction: 2023, 5-furrow plough, strip-type coulter, disc harrow, combination wheel 13.0/55-16, lighting + warning signs, hydraulic adjustment of working width. Gujdjz Sdh Hspfx Acash

Condition: new, Year of construction: 2023, Body BP-350/351 WS, right-hand side, with center post; Body BP-350/351 WS, left-hand side, with center post; rock guard; windshield wiper; tire size 13.0/55-16; long packer arm; lighting. Gsdpfoz Sdhgjx Acajuh

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Gjdpfszu T Smex Acaeuh Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: excellent (used), functionality: fully functional, Haeger 618 MSPe-5 Year of manufacture: 12/2023. The system has been fully overhauled and serviced and is in perfect working order. Gjdpfx Acez Rxkfeaeuh The system can be inspected at any time.

Condition: used, Year of construction: 2015, X - 1,800 mm, Y - 1,600 mm, Z - 815 mm, with C + A axes, spindle 4.6 kW, 30,000 rpm, Sinumerik 840 D Gedswvqr Aepfx Acajuh

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Gujdpfx Ajx S Npfscash Preset automatic format adjustment automatic ink roller cleaning device automatic blanket and impression cylinder cleaning device Grafix powder sprayer IR dryer DryStar 2000 Extended high pile delivery Standard accessories

Condition: used, Year of construction: 2007, 3 x Frech die-casting machines DAW 80F RC, year of manufacture 2003, DAW 125 S DV, year of manufacture 1999, Gujdpfjz Hkg Ajx Acajh DAW 125 F, year of manufacture 2007.

Condition: good (used), Year of construction: 2018, operating hours: 3,869 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Options: VERY unique WIDE TRACK version equipped with PALLET exchanger!! = Spreader / Rotator / Clamp (Range from 560 to 1700 mm) – Proportional lift & lower valves – Width between support legs 1280 MM!! Guedpezuudksfx Acajh

Year of construction: 2020, condition: as good as new (ex-display), 1x Drive unit with chassis 1x Follow-up unit with chassis and height adjustment - Centric roller support adjustment with hand crank - Manual height adjustment, locking with locking pin Godpfx Acefxgrdjasuh - Adjustable height difference: 0-350 mm - Load capacity: 2,500 kg / unit - Component diameter: 200mm – 2,000mm - Running rollers: PUR wheels - Dimensions Length/Width: approx. 1,900mm x 460mm - Chassis track width: 1435mm - Rotation speed: 0 - 2,000 mm/min - Operation: Handheld remote control and foot switch

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, KAMPF (LONGITUDINAL SLITTER) Gedpfxszktycs Acaeuh Desscription:: Year 1979, width 1600 mm, speed 600 m/min Machine is in very good condition and can be seen in production!

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 350 mm grinding length: 1000 mm Godjw Rktzepfx Acajuh centre height: 225 mm grinding length: max. 1600 mm centre distance: 1540 mm spindle bore: 38 mm max. swivability: 90 ° weight of the machine ca.: 6,0 t dimension machine xH: 4,4 x 2,45 x 2,3 mm Machine with CNC package and DFU connection Multi-range measuring head for interrupted surface Tailstock with cylinder error correction Final balance balancing device *

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm Guodpfxjzv Sfbs Acajh B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Gujdjyc T Apspfx Acash Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: new, Year of construction: 2026, feed length X-axis: 80 mm, feed length Y-axis: 80 mm, feed length Z-axis: 60 mm, spindle speed (min.): 24,000 rpm, Perfect for: Applications in model and mold making, as well as for milling other materials – a universal powerhouse with a rapid traverse rate of 80 m/min. Materials: Plastics, composite materials such as CFRP/GFRP, model-making materials, aluminum. Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation. _____ Reference number: 1233 Availability from: approximately December 2026 / January 2027 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle data: 13 kW / 10.3 Nm; 12000-24000 1/min; HSK F 63 Rapid traverse rate X/Y/Z: 80/80/60 Part dimensions X/Y/Z: 3500 x 1500 x 700 Control system: SIEMENS – Sinumerik One with hand terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length monitoring: Renishaw-TS 27 R Other: on request Guodpfx Acszy Updjaeh Year of manufacture: 2026 Condition: new

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Work table - Clamping surface 375 x 1600 mm - Number of clamping slots 4 - Table load 1000 kg * Adjustable travel ranges, machine-controlled - Table longitudinal movement (x) 1000 mm - Cross slide transverse movement (y) 270 mm - Overarm vertical movement (z) 505 mm * Milling spindle - Drive power 7.5 kW - Max. torque 1850 Nm - Tool holder, steep taper ISO 50 - Diameter in front bearing 100 mm - Max. milling head diameter 250 mm - Quill adjustment 90 mm - Swivel range, on both sides 45 degrees * Speeds - Number 18 - Step ratio 1.25 - Range 45 ... 2240 min-1 * Feed rate - Number of feeds 18 - Step ratio 1.25 - Range, longitudinal and transverse 16 – 800 mm/min - Range, vertical 5 - 250 mm/min - Drive power 1.5 kW - Rapid traverse, longitudinal and transverse 3150 mm/min - Rapid traverse, vertical 1000 mm/min * Coolant system - Flow rate 10 l/min - Capacity 45 l * Connected load 8 kW * Machine weight (net) 3150 kg * Space requirement 2800 x 2420 x 2635 mm * Last inspection 03/2026 2. Technical condition The machine was only used in production until February 2011!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped, the gearbox has been overhauled, and the feed and rapid traverse couplings have been replaced. The milling spindle has been overhauled, and a new paint job has been applied. 3. Warranty: 3 months 4. Price: 19,000.00 € 5. Delivery terms: * Pricing: Prices are quoted net for delivery of the machine ex works, excluding VAT. We reserve the right to sell the machine in the interim. * Payment terms: 30% down payment upon order 70% upon delivery Gujdjz H Tuvopfx Acaoh * Delivery date: ex warehouse

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,000 h, clamping force: 3,000 kN, screw diameter: 50 mm, injection weight: 375 g, total width: 2,100 mm, total height: 2,500 mm, overall weight: 14,600 kg, product length (max.): 7,000 mm, Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details. • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. platen distance: 1250 mm • Tie bar spacing (H x V): 730 x 730 mm • Min. mould size: 470 x 470 mm • Platen size (H x V): 1040 x 1040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Injection pressure: 2000 bar • Holding pressure: 1600 bar • Injection speed: 160 mm/s • Injection rate (PS): 274 g/s • Screw speed: 320 rpm • Plasticizing rate: 46 g/s • Nozzle contact force: 85 kN • Barrel heating power: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min Guedpfx Aoyrgq Ejcaoh • Oil tank capacity: 135 l • Material hopper volume: 50 l • Control system: Sigmatek with 15" colour touch screen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Form data memory: up to 200 moulds • Production data recording: up to 100000 cycles • Statistical process control (SPC) system • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle clamping system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distributor system • PID temperature control system • Ceramic heater bands with thermocouples • Automatic purge function • Energy-saving cylinder insulation • Adjustable machine feet • Installation tools included • Hours: ca. 12,000

Condition: good (used), Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 -Voltage: 230/115V Guedpsn Hbb Ajfx Acash -Dimensions: 490/175/H265 mm -Weight: 2.9 kg

Condition: excellent (used), mileage: 246,000 km, power: 412 kW (560.16 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: crane, electric window regulation, trailer coupling, = Additional options and accessories = - Air suspension - Air Suspension Seats - Aluminium fuel tank - Coupling - Heater - Heavy duty engine brake - Leather interior - Low-noise - PTO - Reversing camera - Visor - Xenon lighting = More information = Front axle 1: Steering Rear axle 1: Lift axle; Steering Empty weight: 18.470 kg Godex Ttuzspfx Acajuh Carrying capacity: 13.530 kg GVW: 32.000 kg Crane: palfinger PK 34002-SH F, year of manufacture 2016, behind the cab Technical condition: very good Visual appearance: very good Price: On request

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Gjdpfszardtox Acaeuh Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm Gsdpfxjzrkycs Acaeuh NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Gedpfx Ajx Uw Stocaouh Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: ready for operation (used), functionality: fully functional, The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Godpfx Aewnr Trscaeuh