Used Real Forni Curing Oven for sale (1,731)

Condition: used, Year of construction: 2012, VapoReal model by Real Forni, equipped with 12 doors. 220 cm. Type: steam tube oven Lodpfx Akey Dt S Ioyjrn Brand: Real Forni Model: VapoReal / Vaporeal - 4 decks - 12 loading mouths

Condition: used, -Dimensions: 800x1150x1120 mm -Model: MISTRAL 10T -Serial number: 04970233 -10 levels -Plates: 400x800 -Plate spacing: 90 mm -Power: 18 kW -Voltage: 230V -Weight: 136 kg -Refurbished equipment: The equipment is prepared upon order, and the lead time for processing and return is agreed upon at that time (please inquire about the price after refurbishment). Lrsdszfp U Sopfx Akyon

Condition: good (used), Year of construction: 2008, machine/vehicle number: 200415, Offer 26150 Technical data: - Nominal temperature / continuous temperature, steplessly adjustable up to 1280 °C - Three-sided heating (bottom + sides) - Temperature control via NABERTHERM controller C 30 - Drive: 400 V / 3.6 kW - Internal dimensions approx.: W 250 x H 140 x D 350 mm - Usable volume: 11 L Ledpfjzd Rq Ejx Akyern - Space requirement approx.: W 800 x H 600 x D 750 mm - Weight approx.: 80 kg

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Ljdpjxpf I Nsfx Akyern Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Lrodpfx Aksfx Nfmoyon 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Lrodpfxefz U Nbs Akyjn Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ Lrodpfjfz I Rxex Akysn At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ Ledefzb Rcjpfx Akysrn 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Lodpfx Ajfz Nd Iekysrn 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Lrsdsfy T Spopfx Akyon 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Ljdofzccnjpfx Akyorn ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2021, UV curing oven in operational condition. Possibility for 2 units. Ljdey Nzb Uspfx Akyorn Ask for a quotation!

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 12 h, power: 30 kW (40.79 HP), input voltage: 380 V, temperature: 200 °C, inner dimension length: 1,200 mm, inner dimension width: 1,700 mm, inner dimension height: 2,300 mm, total length: 1,500 mm, total width: 2,200 mm, total height: 2,800 mm, overall weight: 400 kg, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, Professional Composite Curing Oven – Romer SL Lrjdpfey Tvvzjx Akyen Internal Dimensions: 1200 × 1700 × 2300 mm High-performance industrial composite curing oven from the respected Polish manufacturer Romer, designed for advanced composite manufacturing processes including carbon fiber prepreg curing, drying, post-curing, and thermal processing applications. This electric batch oven is ideal for aerospace, automotive, marine, motorsport, and industrial composite production environments where accurate and stable temperature control is essential. Constructed with a heavy-duty steel frame, stainless steel internal chamber panels, and durable powder-coated external finish, the oven is built for continuous industrial operation and long-term reliability. The smart control system delivers precise temperature management, efficient power consumption, and controlled heating/cooling performance. The integrated air circulation and ventilation system ensures uniform heat distribution throughout the chamber for consistent curing quality. Key Features: • Maximum operating temperature: 200°C • Internal dimensions: 1300 × 1800 × 2000 mm • Designed for composite prepreg curing applications • Heavy-duty industrial construction • Stainless steel internal chamber • High-efficiency hot air circulation system • Accurate programmable temperature control • Multi-stage curing program capability • Controlled heating and cooling cycles • Uniform temperature distribution • 8 internal vacuum inlets installed inside the chamber • Vacuum pump included in the sale • Suitable for carbon fiber, fiberglass, prepreg, tooling, and composite components Applications: • Carbon fiber prepreg curing • Composite part manufacturing • Aerospace and motorsport components • Marine composite production • Tooling and mold post-curing • Drying and thermal treatment processes • Research & development and prototype manufacturing The oven is in very good working condition and can be inspected and tested on-site.

Condition: not inspected (used), Electric hardening furnace Must be dismantled and collected by the buyer 3 x 380V 720 kW Ljdpfx Akeywtzisyern including control system

Year of construction: 1993, condition: good (used), machine/vehicle number: 86317, Offer 25335 Technical specifications: - Nominal / continuous temperature, stepless: up to 1280 °C - Three-sided heating (bottom and sides) - Temperature control via NABERTHERM Controller C 19 - Drive: 400 V / 5.5 kW - Internal dimensions approx.: W 250 x H 140 x D 350 mm Lredpox D U Eyefx Akyon - Usable volume: 11 L - Base frame: W 900 x H 900 x D 950 mm - Required space approx.: W 800 x H 600 x D 750 mm - Weight approx.: 80 kg

Year of construction: 1999, condition: used, machine/vehicle number: 99116961, Technical specifications: - Rated / continuous temperature up to 1150 °C - Infinitely variable temperature control - Temperature display Ljdpfx Ajx E Ubgekyern - Drive: 400 V / 5 kW - Internal dimensions approx.: W 160 x H 160 x D 360 mm - Required space approx.: W 850 x H 700 x D 600 mm - Weight approx.: 140 kg

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 07765, We offer this used Tonello 0/10 drying and curing oven, year of manufacture 2018. Manufacturer: Tonello Model: 0/10 Year of manufacture: 2018 Condition: used Lrodpfx Aoyuuy Tskysn Category ID: 2062 Type ID: 1018 Type: Drying and curing oven If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, temperature: 250 °C, power: 30 kW (40.79 HP), Curing oven with two chambers (one programmable heat cycle per chamber)! Equipped with conveyor belt and cleanroom classification! TECHNICAL DETAILS Lrodeyk Sd Uopfx Akyon Process area (minimum): 1,700 x 1,400 mm (2.40 m²) MACHINE DETAILS Electrical Data Main power supply: 3x400 V ±5%, 50 Hz ±5% Control voltage: 230 Vac 50 Hz and 24 Vdc Main fuse: 140 A Motor Output Circulating fan motor: 2.2 kW (2 units) Drive motor for vertical transport: 0.39 kW Drive motor for horizontal transport: 0.09 kW Heating Heating type: Electric with sealed tubular elements Output: 30 kW per chamber Temperature range: 50 °C to 250 °C EQUIPMENT Conveyor system Cleanroom classification

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Lodowctn Hepfx Akyjrn Ask for additional information!

Condition: new, functionality: fully functional, Year of construction: 2025, The most advanced pizza oven from the Moretti Forni S series on the global market. The perfect oven for pizzerias, bakeries, and pastry shops with maximum energy savings: -35% OPTIONAL ICON: €500 SURCHARGE BISCOTO STONE: €500 SURCHARGE OPERATING TEMPERATURE UP TO 500°C (ONLY WITH BISCOTO STONE) Technical Description: - S Series features unmistakable style - Revolutionary design - Innovative materials - Stainless and smooth surfaces for easy cleaning - Enhanced double interior lighting for excellent visibility - Lateral tool holder—extremely practical for paddles, hooks, and brushes always ready for use - Efficiency and convenience - Available in a version with a hood without a front panel - Upward-opening - Lighting on demand - Intuitive TFT color display (in 5 languages) - Innovative side tool holder - Available in 2 finishes: Steel and Icon - Exclusive patented system: allows a 20% reduction in installed power without affecting performance (option) - Proportional power control: efficiency and low consumption - Independent control of two separate temperatures within the same baking chamber - Separate power supply control for ceiling and floor - Timed operation - For partial loading - Staggered baking management - USB port for data input/output Description: Exclusive functionalities introduced by Moretti Forni make the S Series a versatile solution for any requirement. Power-Booster® technology allows efficient peak demand management; for partial loads, Half-Load® technology enables deactivation of unused chamber sections, and Eco-Standby® is a new innovative pause function. International patents and exclusive applications distinguish the series. Adaptive Power® technology enables automatic power management according to chamber load, guaranteeing energy savings. With unique Dual Temp® technology, it is possible to independently control ceiling and floor temperatures for perfect baking of any product type. Revolutionary Smart-Baking® Technology enables independent control of ceiling and floor power. Model: S100E 2/L Lsdowya Uuepfx Akysrn Decks: 2 External deck dimensions: 137x121x187 cm Internal deck dimensions: 95x73xH16/30 cm Weight: 509 kg Number of pizzas: Ø30cm: 12, Ø35cm: 8, Ø45cm: 4 Number of trays (60x40): 4 Pizza production per hour: Ø30cm: 200, Ø35cm: 140, Ø45cm: 70 Number of trays per hour for pizza (60x40): 32 Number of trays per hour for bakery (60x40): 16 Maximum power: 19.5 kW Power supply type: AC V 400 3N AC V 230 3

Condition: new, functionality: fully functional, Year of construction: 2025, Electric Pizza Oven Moretti Forni Neapolis 6 with Proofing Chamber The baking surface inside the oven is made from "Biscotto" brick, which ensures perfect heat distribution across all baking areas, making this oven especially suitable for Neapolitan pizza. Electronic temperature control, independent power regulation for the top and bottom, and coiled heating elements. The oven is equipped with highly insulated, removable doors. Maximum baking temperature is 510°C (950°F). The chamber is constructed from enamelled steel, fitted with castors and safety brake. The maximum chamber temperature is 65°C (150°F). Features: • Heating via coiled bare wire resistors with optimized temperature balancing • Maximum temperature of 510°C (950°F) • Patented self-stabilizing internal deflectors mounted on the oven dome to reduce leakage and ensure even heat distribution • Electronic temperature management with independent control for top and bottom • Continuous temperature monitoring via thermocouple • Adjustable steam circulation via manual valve Standard Equipment: • Mobile oven chamber doors made from stainless steel with enhanced insulation and heat-resistant handle • Stainless steel door supports • Protected lighting with concealed double halogen lamps • Lateral fireproof protection at the chamber entrance • Daily on-timer • ECO-STAND BY TECHNOLOGY™ for workflow pauses • 20 customizable programs • Pre-set programs: temperature rise, average setting, maximum setting, cleaning heat regulation • Separate maximum temperature safety device • Anchor system for lifting • Thermoregulated chamber with internal lighting and concealed controlled castors External Dimensions: External Height: 199 cm External Depth: 137 cm External Width: 108 cm Weight: 525 kg Internal Dimensions: Internal Height: 15 cm Internal Depth: 113 cm Internal Width: 75 cm Baking Surface: (0.84 m²) Total Baking Capacity: Pizza diameter: 330 mm – 6 pizzas Chamber Capacity: Tray cm. (60x40 H7) max 12 Tray cm. (60x40 H10) max 12 Tray cm. (60x40 H13) max 12 Connection and Power: Standard connection: A.C. V400 3N Optional connection: A.C. V230 3 Frequency: 50/60 Hz Ljdpfxewyaz Us Akyorn Max power: 14.7 kW Average consumption: 6.5 kWh Connection cable: H07RN-F 5x6mm² (V400 3N) 4x10mm² (V230 3) Proofing chamber power supply: A.C. V230 1N 50/60 Hz Max power: 1.5 kW Average consumption: 0.8 kWh Connection cable: H07RN-F 3x1.5mm²

Condition: new, - Electric Rotary Rack Oven Mondial Forni - Model: Techno - Dimensions (WxDxH): 1470 x 2550 x 2300 mm - Rack Dimensions: 600 x 800 mm - Baking Surface: 8.6 18T 60x80 m² - Voltage: 400V - Heating Power: 45.5 kW - Electric Power: 48 kW - Weight: 1,440 kg - Electric Rotary Rack Oven 600x800 Techno Mondial Forni Discover the 600x800 Techno Electric Rotary Rack Oven from Mondial Forni, an essential piece of equipment for demanding professional bakeries. With robust dimensions of 1470 x 2550 x 2300 mm and a rack size of 600 x 800 mm, this oven delivers the perfect combination of power and precision for outstanding baking results. Benefit from its 8.6 18T 60x80 m² baking surface for efficient and uniform production of a wide variety of high-quality bakery products. Key Advantages: Dsdcu Ti Eoyg E E Rjnskh Lrjdjyg E E Rjpfx Akyen Precise and Uniform Baking: Thanks to its 45.5 kW heating power, this oven ensures an even heat distribution for precise results with every use. Optimal Energy Efficiency: With an electrical rating of 400V / 48 kW, this oven offers optimal energy performance, ensuring cost-effective long-term operation. Robust and Durable Construction: With a solid build and a weight of 1,440 kg, this oven is engineered to withstand intensive use, ensuring long service life and enhanced reliability. Embrace the Touch Innovation of Tomorrow Electric Rotary Rack Oven 460x760 Techno The listing was translated automatically. Translation errors are possible.

Condition: excellent (used), - Dimensions: 2050x2800x2400 mm - Electric oven Ledowxmrdspfx Akyjrn - 6 openings - 3 decks - With integrated loader/elevator - Baking surface: 6 m² - Power: 43 kW - Voltage: 400 V Refurbished equipment: the equipment is prepared upon order, with agreed pick-up and return times. Please request pricing after revision.

Condition: used, Year of construction: 2020, machine/vehicle number: LF 4.3.2, - Brand: Logiudice Forni - Model: Steam LF 4.3.2 - Catalogue reference: LF-432 - Type: steam deck oven - Technology: annular tube - Number of decks: 4 - Number of mouth openings: 12 - Doors per deck: 3 - Door width: 620 mm - Baking surface: 17.95 m² - Chamber dimensions: 1860 x 2410 mm - Chamber height: 200 mm - External dimensions: 2420 x 3830 x 2680 mm - Weight: approx. 12,000 kg - Thermal power: 120,000 kcal/h - Thermal power: 139 to 140 kW Lrodpjy Du Eisfx Akyon - Electrical power: 1.5 kW - Energy: gas, oil, or wood - Origin: Italy - This Logiudice Forni oven (reference LF 4.3.2) is a professional Italian-made deck oven, designed for high-output artisanal bakeries.

Condition: used, - Masonry annular tube deck oven - Internal dimensions: - 4 decks, width: 3100 mm - Slab depth: 2210 mm - Mouth width: 620 mm - Baking surface: 27.404 m² Ledpfx Akey H E Dnsyorn - Refurbished equipment: the equipment is prepared upon order; pick-up and return timings are agreed upon at that moment (please request price after refurbishment)