Used Rebar Bender for sale (751)

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Nsdpfxeium Euo Agrjwl Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: new, Year of construction: 2026, rebar bending machine evo 36 400 Volt 50 Hz 3 ph. capacity up to 36 mm at R=65kg/mm2 weight 320 kg with 6 round tooling 50-60-70-80-95-120 mm 1 pc. square bolt foot pedal CE declaration Nwodpfx Agehiyadsrel

Condition: new, Year of construction: 2026, Rebar Bender IB 36 - solid construction Njdpfx Aedibzvsgrowl - turning table - manual and automatic mode - Pre selection of bending angle 3 piece - 2 sideholders - with foot pedal for left and right bending Technical Details: bending capacity 500 N/mm² 28 mm Dimensions 800x900x800 mm weight 350 kg motor 3,0 KW bei 400 V 50 Hz 3 phase

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Nodew Dgi Topfx Agrewl Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: orange, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 1,250 mm, Year of construction: 1999, Vehicle location: Bovenden, steel superstructure, flap Body: Bender tipper body approx. 16m³, hydr. flap opening, roof protection, Hardox body Frame width rear 770mm Body is dismantled from Daimler Benz SK 3544 8x8 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nwodpfjvhig Rjx Agrsl - .

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes Nwsdpfx Agjupia Norjl From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Nwedpfevtp Rmex Agrjl Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers. Njdpfoziwnbox Agrowl

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm Nedpfx Aovdiduogrowl - throat depth 610 mm - with support table Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Year of construction: 1970, rechts Ausklink / links S fence elektronisch ja /nein foot pedal mechanisch weight of the machine ca. 1,3 t Nedpjztf Ahefx Agrewl

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW Njdpfxey Awzke Agrowl CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm With bushes, see photos With 1 piece square pin HS-Code: 8462 5900

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Nsdpfxjudlyme Agrjwl

Condition: refurbished (used), Year of construction: 1992, punching force: 40 t, Mubea / Muhr and Bender MIW 400: - hydraulic profile/bar shear with hole punch and notcher - Punching force 40 tons - Activation via foot switch - Quick-change device for hole punch - completely overhauled Punches up to: Ø 30 in 10 mm Ø 20 in 15 mm Cuts up to: Round: Ø30 Square: 28 x 28 mm Angle: 80 x 8 mm Flat steel: 100 x 15 mm / 150 x 10 mm Special tools and fixtures on request. Trade-in of used machines. Njdjrynzgepfx Agrjwl Europe-wide delivery possible.

Condition: used, Year of construction: 1990, pressure 35 t no. of strokes ca 72 Hub/min Nedpfxoztf Ans Agrowl dayligth 195 mm total power requirement 1,5 kW weight of the machine ca. 330-400 kg

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible. Nedeqfgy Hjpfx Agrewl

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Nwjdpez Dillefx Agrol Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Nwedpfx Agsu Ickysrol Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min Nwodpoxu Dxqofx Agrol number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Njdpfsz Dw Emsx Agrjwl Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: Nedpfx Asium Stogrswl - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Nedpfx Aoyvvkwegrswl Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: SY 330 -075, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Akyapak, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 330 mm, overall weight: 9,100 kg, total length: 4,585 mm, total width: 1,610 mm, total height: 1,840 mm, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, The sale includes a 2-meter longitudinal welding station equipped with an Oerlikon MIG 500 A welding unit, with all equipment in full working order. Nwjdpfx Aszzdahogrsl Also included are a lifting table for material handling to the plate rolling machine and a work platform. The plate rolling machine is in good condition and can be put into production immediately. The machine is currently operational, and inspection and test runs can be arranged upon request. With the inclusion of the longitudinal welding station, this package provides a complete solution for manufacturing tubes and special pipe sections to customer-specified diameters, with lengths of up to 2 meters.

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Nwjdpfou Id Ruex Agrel Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1999, total length: 3,650 mm, total width: 1,050 mm, total height: 1,100 mm, Colour: Blue Njdpfxsz D S Ehe Agrewl Empty weight: 2.750 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 9042 99 011 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 4.0 - Max. sheet thickness [mm]: 6 - Max. prebending thickness [mm]: 6 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 180 - Bottom roll diameter [mm]: 180 - Options: Cone rolling - Transport dimensions: 3650mm x 1050mm x 1100mm (l x w x h) - Transport weight [kg]: 2750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Nsdpfxezz Adfs Agrswl Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition