Used Renfroe Clamp 2,5 Ton for sale (15,789)

Condition: good (used), Panel lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper -Sheet metal claw -Wingspan: up to 152 mm -Load capacity: 2500 kg -Number: 1x terminal available -Price: per piece Kedpfx Ajdi Smljkwenb -Weight: 29 kg/piece

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Knjdoz Aplxspfx Akwob Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm Ksdpfjzzkwgsx Akwjnb MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, WE OFFER AN VERY NICE DUNKES PRESS Knjdpfx Aovldx Njkwjb MACHINE IS READY FOR OPERATION.

Condition: used, maximum load weight: 11,450 kg, overall weight: 16,000 kg, axle configuration: 2 axles, first registration: 07/2009, next inspection (TÜV): 07/2026, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, Year of construction: 2009, Equipment: ABS, tail-lift, ACKERMANN – KAF 18 – LBW 2.5 T – INSULATED WALLS – 2.70 M HIGH – NEW BODY – ----VEHICLE HISTORY – GERMAN VEHICLE – VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT – Ackermann box van trailer – Box body with insulated walls – Body type KAF 18 – Disc brakes – Mercedes-Benz axles – Air suspension Kedpszlw Elofx Akwenb – Tail lift (2,500 kg) – Jung Fahrzeugbau body – Spare wheel holder – Tool box – All tires in very good condition – Tire size 385/65 R22.5 – Body length: 7.00 m – Body width: 2.48 m – Body height: 2.70 m ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES AND 15 DAYS AUSTRIA LICENSE PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. For sales to EU and non-EU countries, a deposit of at least 500.00 / 1,000.00 will be charged. Changes, errors and prior sale are subject to change! More vehicles can be found on our website. Sales are made exclusively according to our terms and conditions – see homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Knsdpszzbb Njfx Akweb Number of transport packages: 1 pc EQUIPMENT Remote control

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 980223, overall weight: 1,100 kg, spindle speed (max.): 17,000 rpm, number of spindles: 8, spindle diameter: 16 mm, distance between spindles: 50 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 8 pcs. Spindle diameter: 16 mm Max. spindle speed: 17,000 rpm Distance between spindles: 50 mm Table length: 245 mm Table width: 735 mm Number of workpiece clamps: 2 pcs. Workpiece support/guide: Table MACHINE DETAILS Voltage: 415 V Fuse rating: 16 A Power: 7.5 kW Ksdpfxjzzbdwj Akwsnb Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,100 × 1,150 mm Shipping weight: 1,100 kg Number of shipping packages: 1 pc. EQUIPMENT Drills included CE marking

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 7,097 h, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,900 mm, power: 55 kW (74.78 HP), empty load weight: 4,500 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Air Front tires condition: New Rear tires type: Air Rear tires condition: 40 - 60% Description: MANITOU MT 625 telescopic loader (ST3B series) - - 2.5 tons lifting capacity - - - 6m reach - - - Year of manufacture 2015 - - - 7097 operating hours according to the meter - - - 2-speed hydrostatic transmission - - - mechanical quick coupler - - - 4-cylinder KUBOTA diesel engine TURBO 75 hp - - - 4-wheel steering - - - 4-wheel drive - - - 3 steering modes - - - 4500 kg operating weight - - - Overall height 1.9m - - Width 1.80m - - Length 4m - - - - Front tires NEW, rear tires approx. 50% - - - including used pallet forks - - - very maneuverable loader - - Telescopic forklift in good condition - - - NEW BUCKET available at an extra cost!! - - - Inspection and test drive possible - - including CE Declaration of Conformity + operating manual - - - Delivery possible. Kjdpszuh Nmofx Akwjnb Quick coupler, 3rd valve, 4th valve, front work lights, heater, full cab, CE certificate.

Condition: excellent (used), I am offering for sale a Tektronix DPO 4032 Digital Phosphor Oscilloscope. The device is fully functional, starts up without any issues, and operates correctly. It displays the startup screen and the measurement screen, as shown in the attached photos. The cosmetic condition is good – it has normal signs of use resulting from operation. Technical specifications: • Manufacturer: Tektronix • Model: DPO 4032 • Type: Digital Phosphor Oscilloscope • Bandwidth: 350 MHz • Sampling rate: up to 2.5 GS/s • 2 analog channels • Color LCD display • Interfaces: LAN, USB Host, USB Device, VGA, CompactFlash • Power supply: 100–240 V AC, 50–60 Hz Condition: • Fully functional. • The device starts up and operates correctly. • Sold without measurement probes and other accessories. Kedozru Hmjpfx Akwonb • The set includes only the oscilloscope shown in the photos.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm EQUIPMENT 4x 3D angle – 300 mm 6x Stop – 150 mm 6x Stop – 225 mm 1x Protractor 2x Prism Knedpfxjzxcmho Akwsb 1x Eccentric 1x Flat angle 12x Clamping/tensioning screw 12x Clamp

Condition: used, Load capacity: 3 t Opening width: 38 mm Weight: 15 kg Knjdjb Nwkxspfx Akweb

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Kedpfx Akjzzlc Rjwjnb Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Material clamp, material gripper, load clamp Lifting clamp, hoisting clamp, block grab Manufacturer: NORDGREIF, Type 7548 Year of manufacture: 1997 Load capacity: 500 kg Knsdpfsdz Spnsx Akwjb Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE marking Weight: 50 kg good condition

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Ksdpfx Aswtq Dtokwenb Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, clamping force: 500 kN, clearance between the columns: 305 mm, mold height (min.): 250 mm, plate length: 500 mm, plate height: 500 mm, total length: 3,450 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 2,050 kg, Equipment: documentation/manual, Clamping force: 500 kN (50 tons) Column spacing (H x V): 305 x 305 mm Dimensions of the mounting plates: 500 x 500 mm Maximum mold opening stroke: 350 mm Minimum mold height: 250 mm Maximum distance between the plates: 600 mm Maximum screw stroke: 120 mm Injection pressure: up to approx. 1900 bar (depending on the screw diameter) Stroke of the hydraulic ejector: 80 mm Ksdjzx Agnjpfx Akwsnb Machine weight: approx. 2050 kg Overall dimensions: approx. 3450 x 1050 x 2000 mm Defective control system!!!

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Kedez A R Irspfx Akwjnb Weight: approx. 5 tons Good condition

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Kodjxgiaqspfx Akwsnb Clamping force: 25 tons Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 ccm Injection weight: 36 g for PS Equipment: Conveyor belt, sprue picker, core pull, Euromap Fully inspected! PRICE REDUCED FROM 6500 TO 4950 EUR!!!

Condition: excellent (used), Year of construction: 2008, Press brake from LVD in very good condition. Type PPEB 170 30 Capacity 3100 x 170 tons Knsdoz Dwv Sspfx Akweb CadMan Touch CNC control Y1, Y2, X, X1, R, Z1, and Z2 CNC-controlled CNC crowning Hydraulic Wila New Standard upper and lower clamping LaserSafe Easy-Form angle measuring system Additional manually adjustable back gauge finger Includes a set of tools as shown in the picture.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Kedpfx Aez Dw Emskwenb Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Knedpfjzza Egjx Akwob Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: Knjdpfx Akowm Iz Newjb • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet Knedpfxswl Ruco Akwjb * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 35,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TruBend 5170 / 4m bending length Year of manufacture: 2/2014 Press force: 1700 kN (170 tons), bending length: 4,080 mm Machine operating time: 35,000 hours, hydraulic operating time: 25,000 hours Control system: TASC 6000 Configuration: Knodpfx Akezrnpujweb 1 active bending assistant, 2 support consoles 4-axis backgauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies • Saw blade retraction mechanism for contact-free withdrawal of the blade Knsdpfx Akez Dxr Ieweb from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen

Year of construction: 1973, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 658, Available directly from our warehouse in Son; Knjdpoxz Niusfx Akwob heavy stamping die with electric coupling, electrical system completely renewed around 2019, original build year 1973; mechanically fully overhauled in 2015, moving die resurfaced, die pins and gears replaced with new pins of a much stronger mechanical grade than originally, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this is extremely wear-resistant with the addition of Pb (lead) for better performance and good emergency running characteristics (i.e., no lubrication), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays on each channel, motorized clamping of the stamping die. Maximum stamping die size with automatic clamping 900 x 1300 mm. Safety bars are much more extensive and more robust compared to the original design, 350 tons of stamping force.