Used Renishaw Component for sale (8,658)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Hsdpfx Ansxyungeyju Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 2 kg, Equipment: documentation/manual, RENISHAW OMP 60 3D probe, SK40 OMP60 probe – used Compact 3D probe With optical signal transmission, it is possible to directly set up and inspect workpieces on the machine and transmit the signal. Possible application area for the probe system for medium and large machining centers, compatible with all optical receivers from Renishaw. Switching methods for the probe can be adjusted. Factory setting for optical on/optical off. Probe stylus, l = 100 mm, Probe ball, Ø 5.0 - ruby ball Mount for OMI-2 receiver - interface Protective hose and fitting for the cable from the receiver unit Diameter 60 mm Battery compartment Weight approx. 1.54 kg Operating manual for the OMP60 probe is available in paper form and on CD-ROM. Made in UK RENISHAW OMI-2 transmitter/receiver OMM with connecting cable Machine interface MI12 Honda Tool holder SK 40 Hjdjznk I Sjpfx Anyju Price negotiable Our asking price is €4,190.00 net, ex works, plus packaging costs. All technical specifications are subject to printing errors and changes. Sale exclusively to countries within the EU.

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, Metal 3D printer manufactured in 2018. This RENISHAW AM400 features a build area of 250 × 250 × 300 mm and utilizes a 400 W Ytterbium fibre laser for high-quality additive manufacturing. It supports various materials including AlSi10Mg and Inconel 718, making it versatile for different applications. If you are looking to get high-quality 3D printing capabilities, consider the RENISHAW AM400 machine we have for sale. Contact us for further details. Hodpfx Aoz Atnwonyeu

Condition: good (used), functionality: unexamined, tool type: SK 50, overall weight: 3 kg, Renishaw OMP60 Hjdpfsz E Hvwsx Anysu Probe head, 3D probe Probe stylus length: 150 mm Probe stylus, ruby, ø6 mm 5 units available Price per unit, net, ex works, plus VAT and shipping.

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse Hedpfx Aezix Nmonyju - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Complete with Hsdpfx Aneym Dt Hsyju MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: used, We are offering this used Renishaw MP11 HSK 40 coordinate measuring machine for sale, year of manufacture unknown. Manufacturer: Renishaw Hjdpfx Ansz Dwxteyeu Model: MP11 HSK 40 Serial number: M49417 If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2016, condition: like new (used), Renishaw Roughness measuring kit for REVO incl. - SFP1 Modul - SFS1 Probe straight - SFS2 Probe cranked - SFA roughness standard Hjdpfjni Arnsx Anyou - SFCP positioning device for SFP1 - RCP TC-2 modul changer

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2.7552.069, wire diameter (max.): 6 mm, power of the servo motor: 10,000 W, input voltage: 400 V, type of input current: three-phase, We are offering this very well-maintained Wafios BM 3 wire bending machine, manufactured in 1998, for sale. Tool set for 3 - 6 mm wire is included. Complete documentation is available. The PC has already been replaced. We mainly produced 3D parts from 3 mm wire – brochure holders in all variations. Everyone knows what happens when you maintain the speed after the third bend... distortion. Therefore, this machine operated at a maximum speed of 15%. If you have any questions or require further information, please do not hesitate to send us a message or call us. Hodpszvdd Ajfx Anyju

Condition: excellent (used), Year of construction: 2019, 1.0 unit, two-component dispensing system with material feed and mixer. Hsdpez Hn Ecefx Anyeu Manufacturer: KOCH - Technik Type: GK-65 / 612D / GK65 / Year of manufacture: 2019

Condition: ready for operation (used), Heidenhain LE 412M control unit, ID: 325 802-21, serial number: 8319227, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hodpfx Ansz Hiaheysu

Condition: ready for operation (used), Philips PE 1927/71 power supply, 4022 229 2000 1 D 003868 ACD 9415, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdpfx Aoz Hicvonyeu

Condition: ready for operation (used), Heidenhain UM 111 inverter, ID: 325 000-01, serial number: 7896171, complete with test report. Professionally overhauled and tested, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Note: In the exchange process, your defective unit must not have any mechanical damage, such as fractures, as these cannot be repaired. In this case, an additional charge of €300 including VAT will be applied. Attention: You are bidding on a Heidenhain UM 111 inverter, ID 325 000-01, serial number 7896171, for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. 100% functional. Scope of delivery as per photos. In both the repair and exchange procedures, your defective exchange unit must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €300 including VAT will be issued. Hedpfxjz Hiazs Anyju

Condition: ready for operation (used), Heidenhain UM 113 ID: 325 002-01 SN: 7779363 - complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Hedpfx Ansz Hiblsyeu Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as cracks or breaks, as these are no longer repairable. In this case, an additional charge of €600 including VAT will be applied. Attention: You are bidding on a Heidenhain UM 113 inverter, ID: 325 002-01, SN: 7779363, as part of an exchange service. It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €600 including VAT will be issued.

Condition: ready for operation (used), Philips EPC-8 card, 63-0031-01, EPC8-0X66-00-2, E0280E2, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hodpoz Hicijfx Anyou

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01, serial number: 7840727D – including test report, used, in good condition, 100% functional, scope of delivery as shown in the photos, professionally and completely refurbished and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Hsdpfez Hib Ejx Anyou

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01 SN:7840727D – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Hsdpjz Hib Ssfx Anyju Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In this case, an additional charge of €400, including VAT, will be applied. Attention: You are bidding on a Heidenhain UV 130 ID 324 998-01 SN:7840727D inverter for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400, including VAT, will be issued.

Condition: ready for operation (used), Heidenhain SDC 7501-9703-0112 axis drive circuit board, version D, serial number 98-27-009-044, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Hjdjz Hianepfx Anysu

Condition: ready for operation (used), Heidenhain UM 113 inverter, ID: 325 002-01, serial number: 7779363 – complete overhaul and testing performed by qualified personnel, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Hsdpfjz Hibfox Anysu

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Hjdpfeyzpkzsx Anyou Counting Speed: Fully automated, operator training not required.

Condition: ready for operation (used), Heidenhain UM 121 ID: 325 003-01 SN: 7812529- with test report, professionally and completely overhauled and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Hedoz Hibropfx Anyeu

Condition: ready for operation (used), Heidenhain UM 111 ID: 325 000-01 Converter, serial number: 7896171- with test report, used, in good condition, 100% functional, scope of delivery as shown in the photos, professionally fully overhauled and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Hsdpsz Hiauofx Anyou

Condition: ready for operation (used), Heidenhain UM 112 inverter, ID: 325 001-01, serial number SN7812209 - complete overhaul and testing performed according to professional standards, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Hedpfxoz Hia Us Anysu

Condition: ready for operation (used), Philips EXP-MC Millplus 10-0065-04 TRX3497, Heidenhain EXM-HD1.4, EXM-8 RS422, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hsdpfez Hicpex Anysu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 Hjdsdv I Abjpfx Anysu JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo