Used Renishaw Equator 300 for sale (13,320)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Ijdexyungspfx Anmeba Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Like new. Compatible with Polyworks software. A very beautiful and elegant 3D CNC measuring machine, the Renishaw Equator 300, offered at an attractive price. Three-dimensional comparison with an accuracy of two micrometers! Measuring volume: X and Y axis ø 300 mm – Z axis 150 mm. Resolution: 0.0002 mm. Scanning rate (SP25): 1000 points per second. Scanning speed: 200 mm per second. Maximum traverse speed: 500 mm per second. Operating temperature: +5 to +50 °C. Maximum power consumption: 190 watts. Maximum workpiece weight: 25 kg. Machine weight: 25 kg. Height: 700 cm. Width: 570 cm. Length: 500 cm. No compressed air required. SP25 SM25-1. 6 x SH25 probe heads Wecksler for 6 probes. MODUS™ IM DMIS software & license key. Renishaw control PC, monitor, mouse & keyboard. (Also controllable with Polyworks). The starting bid for the offered configuration is €5,000. Ijdpfx Ansy S Dbcomoba

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: Ibsdpfx Anszix Nmemsa - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Ibodpfxjzpwd No Anmea Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Rapid operation with maximum measurement precision Special features Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Please feel free to contact us if you have any further questions!

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixiersysteme Ibedpeyuut Tofx Anmoa 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident light illumination via LED ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y axes Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow switching Camera-supported measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and portable – powerful performance Easy handling with maximum measurement accuracy Special features Including Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially in the measurement of stamped, plastic, rubber and milled parts as well as tools, profiles, and PCBs. Key features of the measuring microscope include camera-assisted data acquisition, quick operation, and its high precision. Of particular note is the precise edge detection in transmitted and reflected light, powered by smart image processing algorithms. Despite its powerful capabilities, the WM 1 300 CNC remains compact and handy with dimensions of 900 mm × 950 mm × 950 mm.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Ibodpfxezuxyps Anmsa Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, RENISHAW OMP 60 3D measuring probe SK40 Isdpfx Ansy Dia Ijmeba Condition: Glass cover damaged, but function not affected.

Condition: used, Renishaw RMP600 3D probe, SK40, including case Iedpfxsy Dibfe Anmeba Condition: used (functional)

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD Iodpjym Dt Hsfx Anmoba 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: new, Renishaw SA26DBA104B30S Resolute FS measuring head, Siemens 26BIT / 104DIA 3.0M M12, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Ibsdpfxoi Ecm Nj Anmja

Condition: new, Renishaw SA26DBA115B05S sensor, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as per photos. Iedpfx Aoi Ecm Tsnmjba

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Isdjzur Efopfx Anmsba Spiral diameters range from 3/16″ to 1 1/8″ Working width up to 500 mm Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Condition: as good as new (ex-display), Year of construction: 2025, Manual operation Temperature control via a digital thermostat. Ibodpfx Aof Hqayjnmoa DIMENSIONS External dimensions: 1490 x 900 x 970 mm Internal dimensions of the cleaning tank: 900 x 600 x 640 mm Usable working dimensions: 870 x 525 x 400 mm Operating height: 970 mm Capacity of the cleaning tank: 351 l Material: Stainless steel. Thermoacoustic insulation: 50 mm ULTRASONIC Transducer: Piezoelectric Ultrasonic power: 4 kW Ultrasonic frequency: 28 kHz Frequency sweep: Yes Power regulation: 16 positions Heater: 7.5 kW Lid: Manual Drain valve ("): 1 ¼ " Touchscreen: 4.3 " Heater timer: Yes

Condition: like new (used), For sale is a Renishaw XL80 laser interferometer system for machine calibration, suitable for linear and rotary axes, in very good condition. The measuring device is fully functional and has been used very little. It was manufactured in 2022. The device has an accuracy/deviation of 1 nm, and the software is, of course, included in the offer. If you have any further questions, please do not hesitate to contact me. Ibedpszrgvmefx Anmsa

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm Ibodpfx Anezrvccsmsa - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm Iodpfxozh H I Is Anmeba - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, Description: Kuka robot KR 300 R2500 ultra industrial robot, KRC 4, KCP 4 robot. Complete robot, control cabinet, cable panel. Iodjyghrgepfx Anmoba 4 units in stock.

Condition: used, Year of construction: 1997, functionality: fully functional, Fully functional wire brush grinding machine. Iedjznzbvjpfx Anmeba

Condition: used, Year of construction: 2019, functionality: fully functional, Equipment: documentation/manual, RENISHAW OMP 60 3D measuring probe SK40 OMP60 measuring probe – used Compact 3D measuring probe With optical signal transmission, it is possible to directly set up and inspect workpieces on the machine and transmit the signal. Iedpjznk I Sefx Anmoba Possible application area for the measuring probe system for medium and large machining centers, compatible with all optical receivers from Renishaw. Switching methods for the measuring probe can be adjusted. Factory setting for optical on/optical off. Probe stylus, l = 100 mm Probe ball, Ø 5.0 – ruby ball Holder for OMI-2 receiver – interface Protective hose and fitting for the cable from the receiving unit Diameter 60 mm Battery compartment Weight approx. 1.54 kg Operating manual for the OMP60 measuring probe is available in paper form and on CD-ROM Made in UK RENISHAW OMI-2 transmitter/receiver OMM with connection cable Machine interface MI12 Honda Tool holder SK 40 Price negotiable Our asking price is €4,190 net ex works, plus packaging costs. Subject to errors and omissions in all technical specifications. Sale exclusively to EU countries.

Condition: like new (used), 300 linear meters of Nedcon pallet racking New, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height: 6.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam capacity/bay: 3050 kg Negotiable price: €50,280.00 net ex warehouse Offer includes: + 108 pcs. pre-assembled frames, depth 110 cm, height 6.5 m + 642 pcs. beams, length 2.7 m, 3050 kg capacity/bay + 1284 pcs. safety locking devices + 216 pcs. concrete anchors Load capacity labels, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames: blue RAL 5019, infill panels: galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tons, higher bay loads available upon request. Beams: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly are available upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. We always have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top used & new storage technology & heavy-duty racking Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 Isdpefi U Afsfx Anmoba • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service approach with our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking/heavy-duty racking systems, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH * Model: Super 300 1.5 * Year of manufacture: 1998 Ijdpfjzmhz Tjx Anmsba * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Ijdpozmap Ajfx Anmeba Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Automatic manipulator for immersing parts Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Condition: like new (used), Renishaw Probe head PH10M (new style) incl. - Head PH10MQ - Controller PHC10-2 - Handcontrol HCU1 - on demand PAA1 probe adapter (or other type) Ibedpfxoni Avce Anmoa On demand: Probe TP2, 20, 200, TP7 ro SP25 (SP600)

Condition: used, functionality: fully functional, Renishaw Probe head PH10M (new style) incl. - Head PH10MQ - Controller PHC10-2 - Handcontrol HCU1 - on demand PAA1 probe adapter (or other type) Ibsdpfowpq E Ajx Anmsa On demand: Probe TP2, 20, 200, TP7 ro SP25 (SP600)

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting Ibedjzha Hqspfx Anmoa -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!