Used Renner Screw Compressor for sale (7,621)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. Hnsdpfxszu Aibo Akrsu The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: refrigerant dryer, Renner screw compressor RS-Top 7.5, including refrigerant dryer and compressed air tank We are offering a used Renner screw compressor RS-Top 7.5 for sale, including a refrigerant dryer, automatic condensate drain, and compressed air tank. Screw compressor Manufacturer: Renner Type: RS-Top 7.5 Delivery rate: 1,060 l/min Year of manufacture: 2014 Operating hours: 15,256 h Refrigerant dryer Manufacturer: Hankison Type: HHD101 Year of manufacture: 2022 Additional components: Beko automatic condensate drain Hodpjz Irpnjfx Akronu Schneider compressed air tank, 270 liters If you are interested or have any questions, or if you require further technical information, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, machine/vehicle number: RS18_5_ReAN19440656, pressure (max.): 15 bar, Showcase screw compressor RENNER RS 18.5 - 15 bar Year of manufacture: 2018 Operating hours: 2 operating hours Technical specifications Type: RS 18.5 Operating pressure: 15 bar(ue) Delivery volume at 15 bar, according to ISO 1217 Appendix C: 1.89 m³/min Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Sound pressure level: 71 dB(A) Hnedpfx Ajv Rbvcekrsu Length: 1287 mm Width: 799 mm Height: 1296 mm Weight: 532 kg Compressed air connection: G 1 1/4" Visit our Retail store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Hnedpfjzmub Tox Akrou

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar Hnodpfxen Stano Akrju operating pressure 10 bar nominal power 30.0 KW operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - 1,640 mm weight approx. 850 kg

Condition: used, Year of construction: 1995, functionality: fully functional, Screw compressor Manufacturer: RENNER, Type: RS 11-10 Year of manufacture: 1995 Technical data Manufacturer: RENNER Hnodpfxsz A Tdce Akrsu Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Max. operating pressure: 10 bar Motor power: 11 kW All information is subject to change without notice. A demonstration under power can be arranged at any time in our showroom.

Condition: good (used), Year of construction: 2012, operating hours: 30,006 h, functionality: fully functional, Screw compressor, manufactured by RENNER Type RS 11-10, year of manufacture 1995 Type RS-Top 15, year of manufacture 2012 Refrigerant dryer, year of manufacture 2022 Technical data for oil-injected screw compressor, type RS 11-10 Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Max. operating pressure: 10 bar Motor power: 11 kW Technical data for oil-injected screw compressor, type RS-Top 15 Manufacturer: RENNER Type: RS-Top 15 Year of manufacture: 2012 Delivery rate: 1960 l/min Max. operating pressure: 10 bar Motor power: 15 kW Technical data for associated refrigerant dryer (compressed air dryer) Manufacturer: RENNER (produced by Friulair S.r.l.) Type: RKT CQ 0150 Refrigeration circuit: refrigerant Year of manufacture: 2022 Refrigerant: R134a Filling quantity: 0.25 kg Max. operating pressure: 14 bar Power: 0.40 kW Fuse rating: 10 A All information is subject to change without notice. A demonstration under power is possible at any time in our showroom. Hodpfxez A Sypo Akronu

Condition: excellent (used), Year of construction: 2012, volume flow: 1.06 m³/h, operating pressure: 10 bar, pressure: 10 bar, RENNER RS 7.5 kW screw compressor ROTORCOMP screw element 7.5 kW motor Capacity: 1.06 m3/min Pressure: 10 bar Hnjdpfxjz Iri Uo Akrju Year of manufacture: 2012 MACHINE IS FULLY OPERATIONAL.

Year of construction: 1998, condition: excellent (used), RENNER RS 15 screw compressor ROTORCOMP screw stage, 15KW motor, Hnsdpfx Aeh Eu A Njkrou Capacity 1.92 m3 / min, Pressure 10 bar, THE MACHINE IS FULLY OPERATING. WE HAVE A LARGER NUMBER OF COMPRESSORS FOR SALE SCREWS, REFRIGERATION DRYERS AND EQUIPMENT WELDING. WE PROVIDE REPAIRS AND SERVICE.

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Hnjdezz Hilopfx Akreu Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Hnjdpfx Akjyb Sdisreu Good working condition

Condition: excellent (used), Year of construction: 2004, S016550 PROD. RENNER TYPE RSK37 S/N 8470 YEAR 2004 POWER (kW) 37 OUTPUT (m3/min) 6.15 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 7166 / 25832 FREQUENCY CONVERTER no BUILT-IN DRYER yes Hjdpjz Elfdefx Akrsnu EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1' NEW/USED USED

Condition: ready for operation (used), Year of construction: 2001, operating hours: 45,275 h, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 125 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, Equipment: documentation/manual, type plate available, For sale is a used Kaeser SK 26 screw compressor from our company’s inventory. Manufacturer: Kaeser Type: SK 26 Year of manufacture: 2001 Operating hours: approx. 46,275 h Load hours: approx. 23,142 h Available from: December 2026 The compressor is currently in use at our facility and will be available from December 2026. The unit has been used and maintained regularly and is in used condition, commensurate with its age. The compressor is currently ready for operation. Hnjdpfx Asz R I Smekreu On-site inspection is possible after prior arrangement.

Condition: good (used), Year of construction: 2011, Kaeser Sigma Air Manager (SAM) 8/4 – used: Price ex works: €2,750 (net) plus disassembly, etc. Hnjdpfx Ajz Sd I Hskrju Manufacturer: Kaeser Type: SAM 8/4 Year of manufacture: 2011 Serial number: 2015 Part number: 7.7731.1 0-10 bar 100-240V/1/N/PE/50|60Hz 0.7 - 0.35 A SWASAMX.A-01020.01 Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz Hnjdpfx Aeyy U Shskrsu User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 1997, operating hours: 88,000 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: kaeser, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 690 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER CS121 Screw Compressor (75 kW, 10.3 m³/min, 10 bar) KAESER CS121 75 kW, 10 bar screw compressor for sale in excellent condition. Maintained and fully serviced since new. Last major service performed at the recorded operating hours. Manufacturer: Kaeser CS121 Year of manufacture: 1997 Sigma Control system Serial number: 1211178 Operating pressure: 10 bar Power: 75 kW Capacity: 11 m³/min (695 m³/h) Operating hours: Standby: 86,033 h / Loaded: 28,900 h Hnjdsz A Iruopfx Akrju Sigma Control system Motor speed: 1500 rpm Electrical power: 75 kW Overall dimensions: Length 1960 x Width 1240 (+150) x Height 1440 mm Weight: 1200 kg

Condition: excellent (used), Year of construction: 2024, Manufacturer: BOGE Type: C 14 PMDR -350 Hedpoz Svtgjfx Akronu Year: 2024 Pressure: 13 bar Free air delivery: 1.74 m³/min Motor: 11 kW Controller: BOGE focus control 2.0 Voltage: 400 V / 50 Hz Dimensions (W x H x D): 1890 x 1824 x 854 Weight: 475 kg

Condition: excellent (used), Year of construction: 1999, operating hours: 43,019 h, functionality: fully functional, machine/vehicle number: 1127, overall weight: 750 kg, total length: 1,610 mm, total width: 970 mm, total height: 1,380 mm, power: 37 kW (50.31 HP), volume flow: 366 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER BS61 Screw Compressor 37kw 6.1m3/min 7.5bar. compressor For sale KAESER BS61 screw compressor in excellent condition. Maintained from new, serviced throughout. Hnodpfxoydr Ige Akrsu last major service performed at 86009 operating hours Manufacturer: Kaeser BS61 Year of manufacture: 1999 serial number: 1127 Operating pressure: 7.5bar Power: 37 kW Capacity: 6.1 m3/min 366 m3/h Operating hours: standby: 86033h loaded: 43019 h Sigma Control control. engine speed: 1500 rpm Overall dimensions: 1610 x 970 x 1380 mm Tail weight: 750kg

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37-315 series is designed for extremely economical operation in every kW class thanks to its unique design concept, making it suitable for a wide range of applications. These compressors with fixed speeds are particularly well suited as base load compressors. Separation system – highest compressed air quality through proven multi-stage separation Air Control P – the intelligence of the compressor; it thinks, monitors and documents. Thanks to the possible internet connection, there are practically no limits to communication. Drive system – highly efficient, reliable direct drive Compressors – powerful, excellent efficiency Cooling unit – large-surface coolers for the lowest compressed air outlet temperatures and optimal coolant temperatures Hnodpfx Akottucgjrju System fan – powerful, efficient, high-performance Drive motor – robust, designed with power reserves ALMiG Direct 75 Year of manufacture: 2010 Final pressure: 11 bar Motor power: 75 kW Volume flow according to ISO 1217 (Appendix C-1996): 11.58 m³/min Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1970 kg Operating hours: 7637 h Load hours: 6317 h Idle time: 167714 h Total volume delivered: 4,506,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available on request!

Condition: used, Year of construction: 2004, Technical details: pressure capacity: 10 bar volume capacity: 1,1 / 0,95 m³/min. rotary speed of motor: 8500 U/min Number of working hours: 29.498 h weight: ca. 310 kg dimensions L x W x H: Kompressor: 1,5 x 0,7 x 1,5 m dimensions L x W x H: Kälte Trockner: 0,45 x 0,45 x 0,5 m On a steel structure, welded, the feet are stabilized with rubber feet, stand: Compressor: -15 bar working pressure -speed max. 8.500 rpm. Hnodpfx Akjz Dudajrsu -Cooling air 980 m³/h -volume flow at 7.5 bar = 1.1 m³/min. and at 10 bar = 0.95 m³/min. Refrigeration compressed air dryer type 406AP: -volume flow 65 m³/h -Cooling air demand 450 m³/h -refrigerant R 134a -compressed air perm. min./max.: 2 / 16 bar -pressure perm. refrigerant min./max.: 15 / 50 bar -2x connections with 3/4" and 1/4" each Compressed air tank Renner: -Tank size Ø 500 x 1.350mm -operating pressure max. 11 bar -content for 250 liters -div. connections *

Condition: good (used), Year of construction: 1997, For sale are 2 identical Atlas Copco screw compressors. Manufacturer: Atlas Copco Type: ZR 75 / 10 Serial Number: AIF 042705 = Compressor 1 Serial Number: AIF 053082 = Compressor 2 Operating Hours: 94620 h = Compressor 1 Operating Hours: 96461 h = Compressor 2 Voltage: 400 V Power (kW): 76 Air flow rate in m³/min: 10.4 Max. air pressure in bar: 10 Both compressors have been maintained by the manufacturer according to the maintenance schedule (reports available). After approximately 60,000 operating hours, a stage replacement was carried out on both units. The motor was also replaced on both compressors. The units are in good condition. Hnedpfx Asz Rntiskrsu Price: €6,900 per compressor Inspection is possible and encouraged (93499 Zandt).

Condition: used, Year of construction: 1998, operating hours: 120,000 h, functionality: fully functional, machine/vehicle number: S97125902, power: 200 kW (271.92 HP), volume flow: 34.1 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Atlas Copco ZT 200 – oil-free rotary tooth compressor including MD 600 dryer For sale is a well-maintained and fully functional compressed air system consisting of an Atlas Copco ZT 200 compressor and an Atlas Copco MD 600 dryer. The system comes from a professional industrial application and was maintained, inspected, and repaired there using exclusively original Atlas Copco maintenance parts, as specified by the manufacturer. The condition is good for its age, the system is operational and fully functional. Technical data – Compressor: Atlas Copco ZT 200 Type: oil-free rotary tooth compressor Model: ZT 200 Power: 200 kW Max. operating pressure: 7.5 bar Operating hours: approx. 120,000 h Speed: 1,495 rpm Year of manufacture: 1998 Serial number: S97125902 Manufacturer: Atlas Copco Airpower, Belgium Hnedoz E U T Rspfx Akrsu Control: Atlas Copco Elektronikon Drum dryer – Atlas Copco MD 600 Type: MD 600 Atlas Copco control with SMARTLINK Year of manufacture: 2023 Operating hours: approx. 4,300 h Serial number: APF268209 Manufacturer: Atlas Copco Airpower, Belgium The compressor and the dryer are part of the offer and will be sold only together. Condition: used, good for its age, technically well-maintained, regularly serviced and inspected, fully functional. Inspection possible by arrangement. Further technical documents or information available upon request.

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), volume flow: 0.74 m³/h, pressure (min.): 10 bar, Exhibition machine Hedpsxq Elwefx Akrjnu includes 2 x 90-liter pressure tanks / galvanized includes refrigerant dryer includes automatic condensate drain includes oil-water separator includes microfilter includes sub-microfilter Rated power 5.5 kW Delivery rate at 10 bar: 0.74 m³/h Dimensions (W x D x H): 980 x 755 x 1257 mm approx. 300 kg

Condition: good (used), Year of construction: 2014, power: 14.8 kW (20.12 HP), volume flow: 1.63 m³/h, pressure (max.): 7.75 bar, Atlas Copco SF 15 FF Air Compressor Manufacturer: Atlas Copco Model: SF 15 FF Year of manufacture: 2014 Maximum pressure: 7.75 bar Free air delivery: 4.95 m³/min Air flow: 27.1 l/s, 1.63 m³/min Hnsdpfexk U Dcex Akrju Motor power: 14.8 kW = 20 HP Motor speed: 2,885 rpm Weight: 595 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Features: Integrated Workplace Air System™, equipped with SMARTLINK Control: Elektronikon Origin: Made in Belgium No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, total length: 1,935 mm, total width: 655 mm, total height: 1,680 mm, volume flow: 270.122 m³/h, operating pressure: 13 bar, pressure (min.): 5 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. Hnjdpfx Akjz Ah Uxorou For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement.