Used Rewa Rot for sale (3,437)

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Knodpfx Ajyy U Shshioc Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Knsdpsppyhtefx Ahiec Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 2017, condition: used, System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Knedsdkdhbopfx Ahiec Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

Condition: excellent (used), functionality: fully functional, Limas AB: Complete Vegetable Processing Line (peeling, cutting, sorting, and washing) Manufacturers: Limas AB / Quiel GmbH / VEB / Rewa Model / Type: Complete vegetable processing line Key components and specifications: - Peelers and cascade systems: Three-stage brush/cascade peeler Limas AB (serial number: L-1244, manufactured in 2021): roller width 2470 mm, dimensions: 3100 x 2550 x 3052 mm. 2x Stainless steel peelers (including a model from 2007): feed 500 x 500 mm, diameter 950 mm, outlet 630 x 520 mm. 16 peeling shafts with a length of 1500 mm. Elevators and screw/belt conveyors: 4 stainless steel screw elevators with different lifting heights (including 3640 mm, 2350 mm, 2300 mm, 2250 mm). Kjdpfxez Suxbo Ahienc Quiel GmbH screw elevator (Type SFRV5, power 1.5 kW, lifting height 3180 mm). 4 Quiel GmbH hoppers (type SFV 4, power 25 kW) with screw elevators. Belt and inclined conveyors with scrapers (belt width 350–400 mm). Slides / stainless steel chutes (210 x 2000 mm) and vibrating chute (1600 x 800 x 820 mm). - Washing, sorting, and cutting: VEB stainless steel hopper (Type 8260, manufactured in 1974, roller width 620 mm). VEB drum washer (drum width 470 mm, perforation 10 mm). Limas AB sorting system with a sorting drum (ø 450 mm, length 3000 mm, perforations: 23, 38, 50, 65 mm). Select slicer, type Agroselector with V-shaped belt and ø 500 mm blade, and compact slicer (inlet ø 150 mm). Roller inspection table (roller width 500 mm, dimensions 2900 x 1060 x 2120 mm). - Packaging and control: Batch weigher and Rewa weighing/counting machine (Type 83Z, range 0.04–60 kg). Control cabinets and operator platform (platform 3250 x 2250 x 2800 mm). 3 pallets and stainless steel frame with various spare parts.

Year of construction: 2014, condition: new, machine/vehicle number: RE-HU-2014-1603-2, Filter plate specification: 390x390 mm Filtering area 2.8m2 Number of filter plate 14pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Knodeb Dluyjpfx Ahioc Filtering chamber volume 35L Filtrate discharge Open type outlet Construction material for framework Main material for framework is SS 316. carbon steel. Contact parts in PVC or SS. Material of filter plate Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 1695X750X630mm Weight 610KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Year of construction: 2014, condition: new, machine/vehicle number: RE-HU-2014-1603-1, Filter plate specification 250X250mm Filtering area 0.56m2 Number of filter plate 8pcs of chamber plate including one tail plate and one head plate Knjdpsb Dluwsfx Ahiec Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Filtering chamber volume 7L Filtrate discharge Open type outlet Construction material for framework Main material for framework is carbon steel. Contact parts in PVC or SS. Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 960X400X350mm Weight 350KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Condition: new, Hydraulic cylinder Cilinder stand exchange cylinder Kedpjd Hgahofx Ahisnc Chamber filter press As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats.

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Ksdpfxod Eygpe Ahienc Handle length: 210 mm Width 125 mm

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Knjdpfod Ey R Nox Ahioc Handle length: 210 mm Width 125 mm

Year of construction: 1997, condition: used, System: Container, swap body Exterior length: 7650 mm External height: 3025 mm Outer width: 2500 mm Year: 09/1997 Empty weight: Tara 3200 kg Knedjdkdryjpfx Ahisc Filling weight: Gross 16000 kg Condition: General wear, scratches Number: 5 units Other: parking feet, roll-up door, keyhole plates Color: white

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Knjdpfx Asrnnt Iohiec Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: like new (used), System: Chamber filter press, laboratory press Application area: Chamber filter press, pilot plant Design: side-bar guided Type: REWA Filter plate size: 150x150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Cake thickness: 15 mm Filter cloths: optionally available tailored to the medium Discharge: open Filter area: approx. 0.2 m² Knjdewqzibopfx Ahijc Press content: approx. dm³ Plate transport: manual Pump technology: included - optional Purchase or rental: Inspection of the systems by appointment at our facility. Condition: Demonstration unit, as new Weight: approx. 70 kg Length: approx. 70 cm Width: approx. 40 cm Height: with frame + pump approx. 85 cm Miscellaneous: Would you like to rent, lease, or buy this system? Contact us, we are happy to be at your disposal.

Condition: refurbished (used), Chamber filter press 1200x1200 Application: gravel works / tunnel construction Number of filter plates: available in different designs and number of plates Filter pressure: 15 bar Knodpfx Ahjrq I Iwoioc Filter cloths: optional in coordination with the medium Piston diaphragm pump: optional Available: pre-configured from stock or according to customer requirements Condition: refurbished - rebuilt also according to customer requirements

Condition: good (used), Plant: Chamber filter press used Design: side rail guided Filter plate format: 470x470 mm Number of chambers: 13 Cake thickness: 25 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: open Filter area open: approx. 7.68 m² Press capacity: approx. 41.88 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: manual Knsdpfx Ahoqa Dwfoioc Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional on request. The system is refurbished after receipt of order. Special service: optional on request. The system will be set up according to your requirements after receipt of order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: used, Plant: Membrane filter press used Type: REWA - 2 identical machines available Application: Sludge dewatering Design: Side beam Filter plate format: 1200x1200 Number of plates: 70 pieces / membrane mix Filter plates: PP Filter cloths: optionally available to suit the medium Filter area: approx. 320 m2 Press capacity: approx. 2050 dm3 Ksdpfornnr Rsx Ahionc Filter pressure: approx. 15 bar Pump technology: optional Purchase or hire: Viewing of the systems by arrangement at our factory.

Condition: used, Year of construction: 2019, machine/vehicle number: S4-3044, input voltage: 230 V, type of input current: AC, laser power: 120 W, type of cooling: air, total width: 1,428 mm, total height: 1,050 mm, total length: 952 mm, overall weight: 300 kg, laser wavelength: 10,600 nm, input frequency: 50 Hz,

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Knsdpfx Ahoqa Dv Teiec Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Equipment: type plate available, device for dosing pastes, jams, meat, cheese, etc. into aluminum and plastic cups, including an aluminum lid sealing machine and a date coder Kedpfx Aew E H A Ashisnc

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 5100443-2 , Product: Piston membrane pump, feed pump, used Type: Abel HMD-G-32-0250 Construction year: 2009 Power: max. 25 m³/h Pressure: 15 bar Knodpfxed Ey Sas Ahisc Machine number: 5100443-2 Length: 3300 mm Version: Acid resistant, FU controlled

Condition: good (used), Plant: Chamber filter press Type: Chamber filter press 470/36 Design: side rail guided Machine no.: 2770 Filter plate format: 470x470 mm Number of plates: 36 Filter plates: PP Cake thickness: 30 mm Drain: open Filter cloths: optionally available to suit the medium Press capacity: approx. 150 dm3 Plate pack length: approx. 1730 mm Filter pressure: approx. 15 bar Knsdpfx Ahoqa D A Djiec Closing pressure: approx. 380-410 bar Plate transport: manual Pump technology: optional Dimensions L 3500 x W 1000 mm Accessories: Optional - drip plates, ram extension and plate package can be extended Hydraulic unit: AC motors 1.1 KW Purchase or hire: Viewings of the systems by arrangement at our factory

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Knjdpfx Ahjfnk Ehjijc Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, Machine: Screw conveyor, hollow screw Type: Hollow screw conveyor, supported on both sides Length: 9.60 m Ø auger: 350 mm Knsdpfermix Tjx Ahijc Item no. 2024-1302-1

Condition: used, DOUBLE AUGER, SCREW CONVEYOR, 7.20 M Length: 7.20 m Ø auger: 350 mm Weight: approx. 650 kg Material: Housing / cover > galvanized steel / screw > mild steel Knedpfxern T H Sj Ahisc

Condition: used, Machine: Screw conveyor, hollow screw Kedpfx Aorn T R Ishionc Length: 6.30 m Ø auger: inner auger 170 mm, outer auger 460 mm

Condition: good (used), Professional SUHNER Rotofix workshop grinder equipped with a flexible working shaft. Robust industrial design intended for grinding, polishing, and metalworking. Device from the renowned SUHNER brand – manufactured in Germany/Switzerland. Technical condition: the device is fully functional. Visual condition: see photos – normal signs of use. Important: The grinder has cracks in the housing, visible in the photos. Additionally, one of the legs/mounting elements has been repaired previously. This does not affect the normal operation of the device – the equipment is functional and ready to use. Technical data: Manufacturer: SUHNER Model: Rotofix Motor: DKM 2 Power: 0.5 kW Kodpfez Sm Ehsx Ahijnc Power supply: 220/380V Rotational speed: 2800 rpm Frequency: 50 Hz cos φ 0.8 Protection class: IP41 Insulation class: E Included: SUHNER Rotofix grinder, flexible shaft, working end visible in the photos. Ideal for: metalworking workshop, polishing, grinding, metalworking, industrial and manufacturing tasks.