Used Reznor Udsa025-3 for sale (64,570)

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. Fpodpfjx Ihg Isx Afujn The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: DF 3-4/080096, total width: 1,185 mm, total length: 970 mm, total height: 2,400 mm, workpiece weight (max.): 15 kg, empty load weight: 420 kg, number of slots in tool magazine: 12, The machine was used exclusively for rounding the cutting edges of carbide drills and milling cutters. The machining area of the machine consists of a work container, which, depending on the desired abrasiveness of the machining process, is filled with a grinding or polishing medium. The workpieces are attached to holders, lowered into the work container, and moved through the medium via a planetary gear. The friction between the workpiece and the medium results in effective machining in the micrometer range, so that subsequent coating has a significantly higher adhesion. Control system: Siemens: Simatic Multi Panel, Touch Accessories: Stirring paddle, documentation, Fpjdpfxsz N Tc Te Afuen 3 transport carts each with one container, 12 holders, long version for short tools, 12 holders, short version for longer tools, approx. 130 reduction holders, diameter 4-25mm.

Condition: used, Year of construction: 2020, overall weight: 540 kg, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Fork adjustment: 4-way Fork length: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,500 x 1,600 mm Self-weight: 540 kg EQUIPMENT 4-way fork adjuster Fork carriage Fork tines with 1,200 mm length Fedpfx Asz Iw Ntofuepn All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1152

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Fodpez Hc T Usfx Afujpn Manual Lubrication system Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386F03401, Year of construction: 2015, operating hours: 4,744 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,625 mm Free lift: 1,519 mm Overall height: 2,121 mm Load capacity: 1,600 kg MACHINE DETAILS Mast type: Triplex Fodez I R Hlepfx Afujpn Vehicle type: Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000–2,500 kg Battery voltage: 48 V Unladen weight: 2,465 kg Operating hours: 4,744 h EQUIPMENT Semi-cabin Side shifter 3rd valve 4th valve External reference: SL12267SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V01496, Year of construction: 2019, operating hours: 10,328 h, load capacity: 1,500 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,625 mm Free lift: 1,519 mm Overall height: 2,121 mm Load capacity: 1,500 kg MACHINE DETAILS Fpodpfx Afoz I Nc Seusn Mast type: Triplex Vehicle type: Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000–2,500 kg Battery voltage: 24 V Operating hours: 10,328 h EQUIPMENT Side shifter 3rd valve External reference: SL15861SP

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 25693, turning diameter: 150 mm, Specifications: Number of Axes: 3 Maximum Workpiece Diameter: 300 mm (approx.) Maximum Workpiece Length: 300 mm (approx.) Fpjdpfozn Ay Tox Afuen Chuck Size: 6” (standard, options for larger sizes) Machine Dimensions: 2,400 mm x 2,200 mm x 2,500 mm (approx.) Machine Weight: 3,200 kg (approx.) Spindle Speed: Up to 6,000 RPM (standard) Spindle Power: 15 kW (continuous) Spindle Torque: 75 Nm Spindle Bore: 65 mm X-Axis Travel: 300 mm Y-Axis Travel: 250 mm Z-Axis Travel: 300 mm Rapid Traverse (X, Y, Z): 20 m/min (maximum) Feed Rate: 12 m/min (max feed rate in all axes) Number of Tool Stations: 6 to 12 tool stations Maximum Tool Diameter: 32 mm (in fully populated tool turret) Maximum Tool Length: 100 mm Positioning Accuracy (X, Y, Z): ±0.005 mm Repeatability (X, Y, Z): ±0.002 mm Spindle Runout: < 0.003 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386J10675, Year of construction: 2018, operating hours: 16,258 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fpsdpfjz I R D Rex Afuon Lifting height: 4,625 mm Free lift: 1,519 mm Overall height: 2,121 mm Load capacity: 1,600 kg MACHINE DETAILS Mast type: Triplex Vehicle type: Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000–2,500 kg Battery voltage: 48 V Unladen weight: 2,635 kg Operating hours: 16,258 h EQUIPMENT Side shifter 3rd valve External reference: SL12293SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8FBE16T-15590, Year of construction: 2021, operating hours: 10,285 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,580 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,300 mm Free lift: 1,580 mm Overall height: 2,120 mm Load capacity: 1,600 kg MACHINE DETAILS Mast type: Duplex Vehicle type: Electric 3-wheel forklift Fsdpsz I Ng Defx Afuepn ISO class: ISO Class 2 = 1,000–2,500 kg Battery voltage: 48 V Operating hours: 10,285 h EQUIPMENT Side shifter 3rd valve External reference: SL15676SLO

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater, 54.74 kW, Heating Capacity 5830 m³/h UDSA Gas-Fired Warm Air Heater – Efficient, even at peak loads The most well-known product from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install unit is available in 14 sizes, ranging from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room itself. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, including the gas and exhaust connections, must only be carried out by an approved installation company. The gas-fired warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L, with day-night-week program - Exhaust discharge via the roof, version B or C - Exhaust discharge through the outer wall, version C Gas-fired warm air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m³/h Protection class: IP20 Pin No. 0461BN0677 Fedswb A Hiopfx Afuopn You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 1997, functionality: unexamined, machine/vehicle number: K2266, MAMMUT VMK 3 250 CNC 601 multi-needle industrial sewing machine, double-chain stitch, manufactured by Nähmaschinenfabrik Emil Stutznäcker (Cologne, Germany). A benchmark machine in the bedding industry for the continuous quilting of mattress casings, duvets, bedspreads, and panels. Features: - Manufacturer: MAMMUT (Emil Stutznäcker GmbH & Co. KG) - Type: VMK 3 250 CNC 601 - Year of manufacture: 1997 - Serial number: K2266 - Stitch type: double-chain stitch - 3 rows of needles, 75 mm spacing between rows - Minimum needle spacing: 25 mm - Working width: approximately 2,500 mm - CNC 601 numerical control - Integrated thread stand (cone holders) - Unwinders and fabric roller Fpsdpfx Aez N A Ryofusn - Electrical cabinet with control and emergency stop - CE marking Location: Mouscron, Belgium Sale EXW, loading possible upon request.

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Fjdpfxjwpunbj Afuepn Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Fpedpfx Ajx Ihiijfuon Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1986, functionality: fully functional, MACHINE IS IN FULLY FUNCTIONAL CONDITION Fpjdpfx Afovnzzmsujn ATTENTION: OVERSIZE TRANSPORT DIMENSION 2800 X 2800 X 2600 MACHINE IS AWAILIBLE FROM END OF JANUARY 2025

Condition: used, mileage: 435,000 km, first registration: 08/2020, fuel type: diesel, fuel: diesel, Year of construction: 2020, RENAULT PREMIUM C 480 8x4 with MEILLER 3-sided steel tipper body EXCELLENT CONDITION!! • Emission standard: EURO 6D • Engine displacement: 12,777 cm³ • Power: 360 kW / 480 hp • Wheel arrangement: 8x4 • Intarder / RETARDER • Automatic transmission • Differential lock Fpodsz Rkaxspfx Afuen • Hill start assist • Variable speed limiter - Speed Mode • Exhaust gas reducer • Headlight range adjustment • Automatic climate control • Large RENAULT navigation system • Telephone • CB radio • USB port • HIFI speaker system • Multifunction steering wheel • Driver's comfort seat, heated and ventilated • Air-suspended co-driver's seat • Adaptive cruise control • Emergency braking assistant • Lane keeping assist • Leaf spring suspension • Wheelbase: 4,400 mm • Rear axle: 2 x 13-ton AP axles, parabolic suspension • Unladen weight: 15,048 kg • GVWR: 32,000 kg; 41,000 kg technically possible! • Max. total towing weight: 70,000 kg • Tires: 315 / 80 R 22.5 front • Tire tread depth: between 8 and 15 mm • Trailer hitch - pintle hook • Air/electrical connection • Preparation for drawbar coupling BODY: MEILLER D421 • 3-sided steel tipper • BORDMATIK on the left side • 2 x 6 tie-down points in the body • Hopper - German vehicle! - 1st owner / driver = owner! - MOT/TÜV: 08/2027 - On request and for an extra charge: NEW! Errors and prior sale excepted!

Condition: used, functionality: unexamined, This is a used central lubrication unit, model IG 38-3, manufactured by "VOGEL". Fedjz Riyqjpfx Afuspn

Condition: used, mileage: 55,577 km, power: 94 kW (127.80 HP), first registration: 03/2003, fuel type: diesel, next inspection (TÜV): 10/2028, color: silver, gearing type: mechanical, emission class: euro3, number of seats: 2, Equipment: ABS, electronic stability program (ESP), immobilizer system, * €9,900 * Citroën Jumper 2.8 Hdi Long L2h1, 55,577 km, sunroof, trailer hitch, Euro 3 * Seats: 2 * 5-speed gearbox * Armrest * Driver airbag * Sunroof * Cruise control * Multifunction steering wheel * Steel rims * USB * Sliding door, right side * ABS * ESP * Trailer hitch, 2000 kg * Wheelbase: 320 cm * Unladen weight: 1853 kg Fpodpfx Afoz Ncy Hjuen * Payload: 10 kg * Permissible total weight: 2900 kg * Truck registration * Vehicle no. 5 OPENING HOURS Monday - Friday from 09:00 - 17:00 (by appointment...) CONTACT INFORMATION Telephone: WhatsApp Email: Transit and customs registration plates (export number) available from us. Errors, typos and prior sale are subject to change. Technical specifications and equipment features must be checked separately. The condition as per the contract is only that which is inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: good (used), Year of construction: 2005, Andreas Schmid Climate Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3 Air conditioning unit Regulation and Control Climate program controller SE 502 The climate controller contains 4 control zones Programmer 8 setpoints 32 control channels 400 segments 25 programs 8 loops per program Temperature range: -40°C to +130°C Temperature stability: +-1.0 K over time Average temperature change rate from -40°C to +80°C: approx. 3K/min Cooling system: Refrigeration compressor, water-cooled Refrigerant: R23 / R 404 A Cooling water inlet temperature: 15 Ambient temperature: 35°C Heating system: electric resistance heating Electrical connection: 240/400 V, 3 PH, N, PE Power consumption Cooling mode: 24 A Heating mode: 18 A Dimensions: W x D x H 1600 x 800 x 2250 mm Fedpouuibkofx Afujpn Chamber: W x D x H 670 x 640 x 750 mm Internal: TK16 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Fpsdpfx Aewq Ndgsfuen Stroke pinole:40mm Length: 2800mm Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: used, mileage: 798,990 km, power: 353 kW (479.95 HP), first registration: 05/2004, fuel type: diesel, tire size: 385/65R22.5, tire condition: 60 %, axle configuration: 8x4, wheelbase: 5,700 mm, fuel: diesel, fuel tank capacity: 350 l, color: red, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: parabolic leaf (spring), total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = - PTO - Radio/CD = Further Information = General Information Cab: Day Cab Fpsdsz Rkgljpfx Afujn Technical Information Number of Cylinders: 6 Axle Configuration Tire Size: 385/65R22.5 Suspension: Parabolic Suspension Front Axle: Tire Tread: 60%; Reduction: single reduction Rear Axle 1: Tire Tread: 70%; Reduction: single reduction Rear Axle 2: Tire Tread: 40%; Reduction: single reduction Rear Axle 3: Tire Tread: 90%; Reduction: single reduction Weights Unladen Weight: 12,540 kg Payload: 24,460 kg GVW: 37,000 kg Functional Body Brand: Hydraulic Transport Systems Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and meet the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Hand-held remote control with digital display Fsdpoq U Ac Djfx Afuepn Double foot remote control Height approx. min. 700mm horizontal, height max. 1400mm Diameter of face plate 1400mm Angle of inclination min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW we have a huge selection of turntables in all sizes from 100 kg to 30 tons load capacity Used and new machines

Condition: used, Year of construction: 2019, ASCO 7000 Series Automatic Transfer Switch (ATS) | 70A | 400V | 3-Phase | D07ATSC30070J5X0 High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS. Design: G-design Current Rating: 70A Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Fpjdpfx Asw Enqujfusn Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used, Excellent condition, from professional environment. Units available: 17 units in stock

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2006, Dapa, 2006, BPW axles with drum brakes, Aluminum floor, Chassis in very neat condition Fpodpfx Afjz N Hpmjusn = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 500 mm, 2026 Weishaupt WM-G10/3-A ZM Monarch Industrial Gas Burner – 100–1,000 kW – Only 3 Months' Use – Complete Controls & Gas Train. Fpsdpfx Afoz Iucwjuon Manufactured 2026 and used for approximately three months as a temporary winter heating solution at a commercial facility. Removed from service following the site's transition to an electrified heat-pump heating system. Burner was operational prior to removal. Complete with associated Weishaupt controls and gas train/components as pictured. Original purchase/parts receipts available.

Condition: ready for operation (used), Siemens 6AV3617-1JC30-0AX1 Operator Panel OP17-DP12 – Condition: Refurbished, Serial No.: C-N2603591. Professionally refurbished and tested, comes with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Fpodpfx Afoz Riq Asuen