Used Reznor Udsa055-4E for sale (468)

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Isdpfewb A Hiox Achoba Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Iedpfx Acox Ihg Iehjba Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Ibjdpfx Acsx Ihiiohea Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1986, actuation type: electric, working width: 1,100 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: manual, back gauge: 600 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 1,200 kg, Equipment: foot remote control, type plate available, Well-maintained and fully functional mechanical shear. Ibodpfx Acozrp N Aehja

Condition: good (used), Year of construction: 2004, operating hours: 12,582 h, lifting height: 3,150 mm, fuel type: diesel, mast type: duplex, construction height: 2,150 mm, Linde H20D Duplo 315 Freelift / Sideshift / 4th Function, VW Diesel, 2004 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without any guarantees (see our general terms and conditions). You can schedule a viewing and/or test drive without any obligation. Please call beforehand to arrange an appointment, as we are not always on-site. Ijdpfx Aezqyu Techjba Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2006, operating hours: 12,260 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H30D-01 Triplo 465 Freelift / Sideshift / 4th Function, VW Diesel, 2006 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). Ibedpfx Acszqmxxjhsa You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Sensor module, G2 flat module -Inputs (PNP): 4 -Voltage: 21-31 V Price: per piece Ibedpeb A Raxjfx Achea -Quantity: 4 available -Weight: 0.2 kg

Condition: excellent (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module -Manufacturer: Pepperl Fuchs AS-Interface Sensormodul Ovp -Type: VBA-4E-G4-ZE -Number: 1x module available -Price per piece Ibjdpfehzvv Nox Achoa -Cardboard dimensions: 100/70/H65 mm -Weight: 0.2 kg/pcs

Condition: excellent (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module -Manufacturer: Pepperl Fuchs AS-Interface-Sensormodul Ovp -Type: VBA-4E-G2-ZA -Number: 7x module available -Price per piece -Cardboard dimensions: 105/65/H50 mm Ibedehzvv Tepfx Achoa -Weight: 0.1 kg/pcs

Condition: good (used), Year of construction: 2017, operating hours: 12,285 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H25D-02 Triplo 470 Freelift / Sideshift / 4th Function, VW Diesel, 2017 Ibedpjzhbhvefx Achoa A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Iodpjxua N Sjfx Achoba Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: good (used), Year of construction: 2005, operating hours: 7,860 h, load capacity: 3,500 kg, lifting height: 4,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, Linde H35D triplex 465 Freelift / Sideshift / 4th Function 2005 VW DIESEL Video available via Whatsapp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers and accessories. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). For viewing and/or a test drive, you can make an appointment without obligation. Please call ahead as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Iedpfoywu Scsx Acheba 5391 LR Nuland

Condition: good (used), Year of construction: 2016, operating hours: 10,780 h, load capacity: 3,499 kg, lifting height: 5,349 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, Linde H35D-02 Triplex 535 Freelift / Sideshift / 4th Function VW Diesel 2016 Video can be sent via WhatsApp. Ongoing stock, see our website. Ibodpoy Rkntjfx Achsa Prices are ex Nuland. Van de Wert Trading B.V. maintains a varying inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). For viewing and/or a test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2009, operating hours: 9,714 h, load capacity: 1,800 kg, lifting height: 4,697 mm, fuel type: gas, mast type: triplex, construction height: 2,150 mm, Still RX 70-18 Triplex 470 Freelift / Sideshift / 4th Function LPG 2009 Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Ibodpfxjy Nbr Ts Achea Van de Wert Trading B.V. carries a rotating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) You are welcome to schedule a viewing and/or test drive without obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2017, operating hours: 7,350 h, load capacity: 2,500 kg, lifting height: 4,650 mm, fuel type: diesel, construction height: 2,200 mm, Linde H20D-02/600 triplex 465 Freelift / Sideshift / 4th function 2017 DIESEL 7350 hours Video can be sent via WhatsApp. Iodeyt Nucspfx Achjba Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices and in AS-IS condition without warranties. (see our general terms and conditions) You can make an appointment for a viewing and/or test drive without obligation. Please call in advance as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2025, working width: 2 mm, MM123 4EH 75/102 / M123 4E/5BH102 FRAME / 4 BODIES / GRINDEL STONE PROTECTION NSHMM123 / GRINDEL STONE PROTECTION / NSHMM123 / FRAME SWING DEVICE / STANDARD PLOUGH HEAD / MEC HEAD / CARRYING AXLE CAT.2 FOR HEAD A / MEC. ADJUSTMENT / MM113/123 Ibedpfoyynvtex Achea

Condition: good (used), Year of construction: 2019, operating hours: 8,995 h, load capacity: 2,500 kg, lifting height: 5,450 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, Still RX 70-25 Triplex 545 Freelift / Sideshift / 4th / 5th Function, Diesel, 2019 Video can be sent via Whatsapp. Ongoing stock, see website. Isdpfx Acoymygijhoba Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranty. (see our terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 1998, load capacity: 3,000 kg, lifting height: 5,900 mm, fuel type: gas, mast type: triplex, construction height: 2,650 mm, Year of construction: 1998 Field of application: Internal logistics Isdpfx Ajx Hr Srschsba

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Ibjdpsvlnvrofx Achoa

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: KK/126675, functionality: fully functional, cutting height (max.): 100 mm, saw blade diameter: 315 mm, saw blade bore: 30 mm, overall weight: 250 kg, intake manifold diameter: 120 mm, TECHNICAL DETAILS Maximum cutting height: 100 mm Cutting height at 45°: 70 mm Minimum saw blade diameter: 250 mm Maximum saw blade diameter: 315 mm Saw blade bore: 30 mm Saw unit tiltable: 45° to 90° Table and guides Roller table length: 840 mm Table width: 560 mm Parallel guide adjustment: 1,300 mm Dust extraction Dust extraction port diameter: 120 mm MACHINE DETAILS Electrical data Voltage: 400 V Ibsdpfx Acszuwuxshja Current consumption: 10 A Fuse rating: 16 A Main motor power: 3.0 kW Dimensions & weight Dimensions (L x W x H): 2,100 x 900 x 1,050 mm Machine weight: 250 kg Transport packages: 1 piece EQUIPMENT CE marking Note: The shaft and saw blade for the scoring unit are present, but the drive motor for the scoring unit is missing.

Condition: used, mileage: 225,553 km, power: 375 kW (509.86 HP), first registration: 06/2014, fuel type: diesel, fuel: diesel, driver cabin: sleeper cab, Year of construction: 2014, Equipment: air conditioning, parking heater, Cab: High sleeper cab GVW: 120.000 kg = Additional options and accessories = - Heater - Sleeper cab - Vehicle heater = Remarks = = Additional options and accessories = Iodjzuy Hqopfx Achjba - Driver seat air-cushioned = More information = Steering wheel placement: Left Production country: DE Please contact Theo Lelie , , ) for more information

Condition: used, Used pallet racking systems from SSI Schäfer are among the most popular solutions for efficient and secure warehousing. This heavy-duty racking system is ideal for warehouses, industrial facilities, and logistics operations that require stable and durable racking for Euro pallets. The proven PR600 design offers high load capacities, flexible configurations, and reliable daily performance. Purchasing pre-owned means getting tested brand quality at an attractive price—available immediately from stock for new installations, conversions, or extensions of your racking system. Customizable: The racking frames (frame types P100 / P120) can be modified to your desired height—precisely and professionally in our workshop. We supply tailored racking solutions for any warehousing requirement. PRODUCT DETAILS - Height: approx. 750 cm - Depth: approx. 105 cm - Length: approx. 3090 cm - Shelf load: 3,000 / 3,500 kg (depending on configuration) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, type INP100 or CE110 (box profile) - Beam color: Blue - Frame type: P100 / P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 165 incl. floor spaces - Model: Used SSI Schäfer PR600 - Availability: available immediately from stock, multiple units in stock SCOPE OF DELIVERY: - 12 × frames approx. 7.50 × 1.05 m, galvanized, pre-assembled - 88 × beams approx. 270 cm (INP100 or CE110) - 176 × safety pins Price: €3,744.00 net €4,455.36 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarding company – shipping costs depend on postal code - Professional assembly and disassembly by trained teams available on request - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding, customized quotation—tailored to your specifications. Whether new installation, conversion or extension—we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit our showroom! On site, you can get a comprehensive overview of our pallet racking, storage racks, and other solutions. Many systems are assembled and ready to view. Our expert consultants are available to assist with questions and provide personalized advice—we look forward to your visit! Iedjzuxh Topfx Acheba Still haven’t found what you’re looking for? Visit our website for a quick overview of many offers and item variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our phone number can be found on our company profile. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will call you back as soon as possible.

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial companies, and logistics operations that require robust and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new installations, retrofitting, or expanding your existing racking system. Ibodpfxozuxhao Achja Customizable: The racking frames (Type P120) can be rebuilt to your desired height – professionally and precisely in our workshop. We provide made-to-measure racking solutions for every warehouse requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 540 incl. floor spaces - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price: €11,844.00 net €14,094.36 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany via our partner shipping company – freight costs depend on postal code - Professional installation and dismantling by trained teams is optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding quote tailored to your requirements. Whether new build, modification, or extension – we provide competent advice for your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, shelving, and other solutions. Many systems are assembled and ready to view. Our specialist advisors are available for questions and individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm Ibsdpfx Aozuw Avechsa - Length : approx. 13.35 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1724,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 60 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. Ijdpfezuwzxjx Achjba - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5885,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.