Used Riva Calzoni Mr 1800 P for sale (44,689)

Condition: used, Hydraulic Motor 1800 cc, Riva Calzoni MR 1800 P, Used machine Manufacturer: Riva Calzoni S.p.A. (Italy) / Rexroth Calzoni Type: MR 1800 P Condition: Used, industrial execution Knedpfxezxw Sxj Ahisc Overall dimensions: 550 x 550 x 590 mm Technical and operating parameters: Displacement: ~1800 cc/rev Maximum operating pressure (P. max): 250 bar Maximum speed (R.P.M. max): 250 RPM Design: Radial piston, high-torque low-speed (HTLS) hydraulic motor

Condition: used, Riva Calzoni Hydromotor MR350/350/46852 250bar – removed from Ferromatik MV 200-970 - taken from a running machine - fully functional Manufacturer: Riva Calzoni Type: MR350/350/46852 Spare part no.: 10098158 Kodow Ah Rijpfx Ahisnc

Condition: used, Year of construction: 1984, radial piston motors Knsdpfohpiiqsx Ahisc oil motor RADIAL-PISTON-MOTOR for dimter DKV 5

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 Knodpfxjzr Rpds Ahioc min. module 1 total power requirement 45 kW weight of the machine ca. 22 t dimensions of the machine ca. 5x3x4 m

Condition: used, Calzoni hydro motor 250bar MR350E - removed from K-Tec 350 - S - removed from running machine Ksdpsrr Efvjfx Ahijnc - fully functional manufacturer: Calzoni type: MR350E sparepart no.: 10084268 manufacturer no.: MR350E-F2N1N1C1NX Dition: gebraucht

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year of Manufacture 1975 with control panel in the cabin, bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, max. saw blade width 310 mm, bandsaw blade length 11,500 mm bandsaw size 11495x310x1.85x55 log infeed system approx. 20 m long, four-strand system with inserter Kjdpexvrnisfx Ahionc block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, drive power 100 kW, carriage speed 5-120 m/min. powered roller conveyor with slab removal with brush, lifting device with puller for trimming complete electrical switchgear cabinets complete sharpening room equipment for bandsaw blades

Condition: used, Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, control cabinet height: 2,300 mm, overall weight: 20,500 kg, control cabinet length: 3,000 mm, rotational speed (max.): 264 rpm, number of blades: 50, # Lindner Power Komet 1800 – 200 kW – Year of Manufacture 2012 – Secondary Shredder For sale is a regularly maintained and well-kept Lindner Power Komet 1800, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial single-shaft secondary shredder for the processing of pre-treated commercial and construction mixed waste and was permanently integrated into our stationary processing line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Power Komet 1800 - Year of Manufacture: 2012 - Machine Number: 1953 - Operating Hours: approx. 38,000 h - Machine Weight: approx. 20,500 kg - Main Drive: 200 kW - Hydraulic Drive: 11 kW - Operating Voltage: 400 V / 50 Hz - Rotor Speed: 264 rpm at 50 Hz - Number of Blades: 50 pieces - Blade Dimensions: 172 × 57 × 28 mm - Screen Hole: Ø 30 mm - Frequency Inverter: ABB ACS-800 - Hydraulic Unit: Bosch Rexroth - Design Throughput: approx. 5 t/h (material-dependent) ### Equipment and Application Area The Power Komet 1800 features a frequency-controlled 200 kW main drive and a hydraulic feed unit for uniform material feeding. The machine was used for the secondary shredding of already pre-sorted and pre-shredded commercial and construction mixed waste. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its operating life. A separate maintenance contract with the manufacturer Lindner Recyclingtech exists for the Lindner Power Komet 1800. In addition to the regular maintenance work, necessary repairs and wear parts were continuously replaced. Knedpfx Ahjz R Uraeisc Important maintenance measures: - Drive bearings completely renewed. - Drive belts completely renewed. - Rotor completely re-armored. The complete rotor re-armoring is carried out regularly to repair areas subject to wear. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate switchgear room and are therefore protected from dust and dirt from the production environment. ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on site during the dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your contact.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 520 mm, turning length: 3,000 mm, turning diameter: 800 mm, spindle bore: 170 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 15 rpm, spindle motor power: 26 W, rotational speed (min.): 15 rpm, rotational speed (max.): 1,000 rpm, Harrison Alpha CNC/Manual Lathe Model: 1800 XS Capacity: 800 x 3000mm Control: GE Fanuc Alpha x Series Year: 2008 Distance Between Centres: 3000mm Swing Over Bed: 800mm Swing Over Top Slide: 520mm Swing In Gap: 870 x 340mm Spindle Speeds: 15-1000 RPM (2 Ranges) Spindle Bore: 170mm Main Motor: 26 KW Machine With: 400mm 3 Jaw Chuck Fixed Roller Steady Photographs taken on site prior to cleaning and servicing Kodsz S Nfvepfx Ahienc

Condition: like new (used), Year of construction: 2023, operating hours: 1,900 h, clamping force: 1,600 kN, screw diameter: 105 mm, clearance between the columns: 18,701,420 mm, displacement volume: 4,546 cm³, total length: 13 mm, total width: 4 mm, total height: 3 mm, overall weight: 83 kg, pressure: 1,778 bar, 8 hot runner channels Kedpfoy I Apqex Ahienc 16 sequential pneumatic valves 2 air blowers SERVO PUMP PC MC6 WEIGHT 83T DISTANCE BETWEEN PLATENS 3400MM

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Kjdpfxezfi Hbe Ahisnc Supply current: 47.5 A Air supply: 6 bar Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Technical data, prices, and images can be found in the PDF files attached. Knjdpfezuddyex Ahioc

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: 093185, We offer a drum-type shot blasting machine with a steel belt. Steel belt width – 1800 mm Machine year of manufacture – 1982 Filtration unit capacity – 15,000 m³/hour Filter motor – 30 kW Kodpfx Aoz Nqduohisnc Filter year of manufacture – 2017.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,110 mm, travel distance Z-axis: 1,800 mm, number of axes: 3, This 3-axis MASSIVIT 1800 PRO was manufactured in 2019. It features a maximum printing volume of 1,450 × 1,110 × 1,800 mm and a maximum linear printing speed of 300 mm/s. The machine is available with either one or two printing heads, with the two-head configuration available at an additional cost. If you are looking to get high-quality large-scale 3D printing capabilities, consider the MASSIVIT 1800 PRO plastic 3D printer we have for sale. Contact us for further details. • Printing technology: Gel Dispensing Printing (GDP) • Printing heads: Two machines available: one equipped with 1 printing head and the other with 2 printing heads. The machine with 2 printing heads is available at an additional cost. • Max build volume (X/Y/Z): 1,450 × 1,110 × 1,800 mm Knsdpfxsz Hdflj Ahisc • Max linear printing speed: 300 mm/s • Z-axis printing speed: up to 350 mm/hour (specified for a 1 m diameter cylinder) • Layer thickness / resolution: 1.3 mm (Normal), 1.0 mm (Quality), 0.8 mm (High Resolution) • Special printing modes: Mega-Quality, Variable Resolution, Mold Mode • Supported materials: Dimengel 90 (all-purpose), Dimengel 100 (translucent), Dimengel 300 (transparent) • Material system: Single-material • Software: Integrated software incl. Massivit SMART Pro Slicer and Estimator Tool; advanced slicing algorithms; Mold Mode; Variable Resolution; Mega-Quality • Monitoring & automation: Automatic time-based cleaning; camera on printing head tip; remote monitoring; remote operation/support via computers, tablets, and phones • Current machine status: Two units available; being replaced by new machines. Replacement container ETA 29 Oct 2026; installations expected early November. Both units purged/drained and currently not in operation.

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Knodswxmb Eepfx Ahisc Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Ksdpfxsxl Elgs Ahisnc

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) Knodpeyn Ntzofx Ahijc • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: good (used), Year of construction: 2013, 230mm Swing, 230mm Max Turned Diameter, 230mm maximum turning length, 12 + 12 Station Turrets, 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, Kodpfx Asz Sqcvehijnc 5000rpm Sub Spindle, +/-50mm Y axis, coolant, swarf conveyor, tool setter, parts catcher, Magazine Bar-feed.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,280 h, travel distance X-axis: 165 mm, travel distance Z-axis: 700 mm, total height: 2,200 mm, total width: 1,630 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 2,800 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details. - Operating Hours: 41,280 h (as of Spindle Hours: 24,632 h (as of Total Machined Parts (TEIL GESMT): 14,162 pcs- Number of Spindles: 2 (Main Spindle & Counter/Sub Spindle)- Main Spindle Speed Range: 50 - 5,000 rpm- Counter Spindle Speed Range: 50 - 6,000 rpm- Number of Turrets: 2 (Tool holders)- Powered/Driven Tools: Yes- C-Axes: 2- Y-Axes: 1 (Upper turret)- Max. Turning Diameter: 230 mm- Max. Workpiece Length: 700 mm- Power Supply Voltage: AC 200/220V, 3-Phase (PE, 50/60 Hz) / 400 V, 50 Hz- Rated Power (Nennleistung): 75.21 kVA- Full Load Current (Volllaststrom): 197.37 A- Interrupting Capacity (Unterbrechungsstrom): 13 kA- Short-Circuit Current (Kurzschluss-Strom): 25 kA- Schematic Output (Schaltplan-Ausgabe): PT1H31AA02- Additional Equipment & Accessories: * FMB turbo 8-80/3200 bar feeder * Chip conveyor * Coolant system with belt filter * Internal coolant supply (IKZ) & supply via turret head * Hydraulic power unit * Large selection of tool holders, collet chucks (REGO-FIX / ER), and turning inserts Technical Specification Knedez I Rbvopfx Ahioc Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Calzoni MRE 8200M Battenfeld No. 21640527 Kedpfx Ahjyitfqeienc

Condition: excellent (used), Battenfeld Calzoni hydraulic motor MR 4500 L Kodpfxsfpa Ins Ahienc

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Permanent software license Manufacturer Company: Massivit 3D Printing Technologies Model: Massivit 1800 Knjdpfx Aozcv S Hohioc Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Kodpfx Ahowvir Isijnc Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Ksdpfolnanwex Ahisnc

Condition: new, For heavy goods (sand, gravel, stone, etc.), with Hartox wear strip, tipping angle 90°. Knsdpfx Ao Abnp Rohiec Load capacity: 700 kg.

Condition: used, Year of construction: 1998, operating hours: 8,240 h, lifting height: 5,550 mm, fuel type: electric, mast type: triplex, battery voltage: 48 V, fork length: 1,200 mm, Year of manufacture: 1998 Empty weight: 3.600 kg Lifting capacity: 1.800 kg Number of valves: 3 General condition: average Technical condition: average Visual appearance: average Mast type: triplex = Additional options and accessories = - 3rd valve = Remarks = = Additional options and accessories = - Free lift = More information = Number of valves: 3 EPA Marked: yes Knjdpfx Asz I A Rpshioc Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information