Used Rod End for sale (9,454)

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Podpfjzvyw Eox Aayogr Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: used, Spherical plain bearing, rod end, ball joint head -rod end. Shaft Ø 50 mm -Thread: M52x3 Pgjdpfxoigamxs Aayor -Receptacle Ø: 21 mm -Number: 2x joint head available -Price per piece -Dimension: 250/150/H100 mm -Weight: 5.4 kg/pc.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approx. 60,000 packs (approx. 40 operating hours) have been processed during trial operation! For sale is an absolutely like-new, high-end deep-drawing packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in a cleanroom, dust-free • Operating hours: Only approx. 60,000 individual packs (equivalent to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (incl. discharge belt) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: Compressor not included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format configuration: 4 lanes side by side / 1 row (pp. 13-14) • Actual internal form dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (form plate type 5, directly water-cooled) (pp. 14-15) • Feed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers and best-before dates directly in the control system (pp. 19-20). Pgedpfszwgxrjx Aayjr • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge belt: High-quality Intralox discharge belt (800 mm) with blue Intralox chain and separate frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection nozzles installed on the tool side for packaging under modified atmosphere. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control system (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic circuit diagrams in German are included (pp. 19-20). 💰 Price € 29,900,- net excluding VAT. • Shipping costs: Available on request throughout Europe • Delivery time: Immediately available • Inspection and collection: Possible at any time by arrangement (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.)

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Pedpfexwp A Hjx Aayjgr Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Pgsdpfezmt U Esx Aayjr

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Used condition, see pictures Pgjdpsum I Sfjfx Aayer Shipping by forwarding agent or collection by appointment

Condition: new, Year of construction: 2020, End Milling Machine – Pertici ML200A - Brand new – Year 2020 The ML200 by Pertici Industries is an automatic vertical-axis end milling machine designed for processing aluminium and PVC profiles. Pgodpfx Aasy N S Uljysr The machine allows machining operations with angles from 90° to 22.5° and from 90° to 157.5°, ensuring precision and reliability during end milling operations. Heavy-duty electro-welded steel structure with high-rigidity cast iron bench, complete with sliding milling unit on precision-ground guide rods. Equipped with: Quick pneumatic cutter change system Lubrication system 5 pneumatic clamping cylinders Three-phase motor 1.4 / 1.9 kW – 1400 / 2800 rpm Oil-pneumatic feed system for the milling unit Adjustable feed speed Profile support with vertical and horizontal clamps Anti-vibration feet User and maintenance manual Ideal machine for professional aluminium and PVC window and door manufacturing. Technical specifications: Motor power: 1.4 / 1.9 kW Power supply: 400V – 50Hz – Three-phase Motor speed: 6700 / 3350 rpm Maximum tool diameter: Ø 250 mm Tool bore: Ø 32 mm Maximum profile height: 130 mm Maximum profile width: 350 mm Maximum machining height: 145 mm Required air pressure: 6 – 7 bar Air consumption: 30 L/min Machine dimensions: Length (a): 1020 mm Height (b): 1700 mm Depth (c): 1410 mm Weight: 310 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 720 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 90 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch, emergency stop switch and restart protection. Without Fixing Holder: max. Length of workpiece, finished: 300mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: Pedpfx Aaeid Ixdoyegr max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 90kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 720x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks inklusive folgendem Zubehör: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: used, Hydraulic Cylinder, Double-Acting Piston diameter: approx. 160 mm Piston rod diameter: 100 mm Cylinder stroke: approx. 170 mm Operating pressure: approx. 300 bar Compression force at 300 bar = 60 metric tons Psdpfx Aasxcivdeysgr - Thread on piston rod - Spherical rod end on cylinder for pin Ø 90 mm Retracted installation length: 850 mm Net weight: 200 kg Cylinder was used for test purposes and is in as-new condition.

Condition: used, Year of construction: 2013, functionality: fully functional, URBAN post milling cutter. Pgodpfxozpyhke Aayer

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Equipment: CE marking, Prodám formátovací pilu Altendorf typ F45 ProDrive , stroj je v perfektním stavu a je možné si ho otestovat v provozu do konce měsíce srpna , cenu nabídněte ? Pedpfx Ajzrtb Njaysgr

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3458 F, working width: 2,500 mm, Double tenoner FRIULMAC 2003, 3+3 heads Pedsx Rdrfspfx Aayjgr

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Pgedsid Iymjpfx Aayjr Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, workpiece weight (max.): 2,000 kg, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Pgsdpjy Tni Tofx Aayjr Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: RF5060-5-2021, Year of construction: 2021, Bradman Lake SL80 Semi-Automatic End-Load Cartoner • Speed: up to 80 cartons per minute • Carton Size Range: A 50–254 mm | B 19–100 mm | C 130–305 mm • Feed: manual loading area for 2 operators • Glue System: Nordson ProBlue 4 hot-melt unit • Construction: stainless steel frame & panels, hygienic design, CE compliant • Vacuum Pump: Busch • Features: SIKO digital readouts, inverter drive, castors for mobility Podpfx Aasxqmmpsyjgr

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3928 A, working width: 250 mm, Equipment: documentation/manual, Motor Power: 30 kW Equipped with: Hnebni Iow A A E Is Rp Tot 1+1 saws Podpfx Aexix Tfjayjgr 1+1 milling unit 1+1 drilling unit Max length: 1000 mm Max width: 250 mm Max thickness: 50 mm double end tenoner, double drilling, step by step

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Podpfx Aaozc Rdksyjgr

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Chipbreaker on the right and left spindles. Pedszfprkspfx Aayjgr Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Track shoe width 50 mm for processing narrow parts. Machine in perfect condition, ready for use.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. Psdpfxjwkdt Ns Aayogr The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available.

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: Psdpjzm Hr Rjfx Aaysgr 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: used, Year of construction: 2010, Brooks Automation Wafer Front-End Module, 300mm, ASYST Spartan EFEM, Sorter Model: ASYST Spartan EFEM Type: Sorter Condition: Used Pgodsx I Ax Sjpfx Aaysr Technical Data: 100-240V AC 50/60Hz 10A General: 300-mm EFEM with 3 load ports, cleanroom mini-environment, and integrated wafer transfer robot This unit is an Equipment Front End Module (EFEM) from the ASYST Spartan series, designed for fully automated handling of 300 mm silicon wafers in semiconductor manufacturing. It features three load ports, a mini-environment with ULPA air filters, internal lighting, comprehensive safety controls, and all necessary interfaces for seamless integration into production lines. In addition, it comes with a fully integrated wafer transfer robot that extracts wafers from FOUP/carrier load ports, separates them, and precisely delivers them to downstream process modules. Year of manufacture: 27.12.2010 Including CD with operating, service, and installation manuals (9701-3060-01 Rev G)

Condition: used, Year of construction: 2007, saw-blade dia. 250 mm turning speeds 2800 U/min pressure 6-7 bar Pgjdpfx Aaeztrwleysr weight of the machine ca. 273 kg

Condition: used, Year of construction: 2009, operating hours: 6,368 h, power: 69 kW (93.81 HP), John Deere 6230 Front Loader Year of manufacture: 2009 Hours: 6368 4-cylinder John Deere engine, 69kW Hydraulic quick-coupler Approval for 40km/h New TÜV inspection! Tyres as new! Climate control, radio Good, ready-for-use condition You can view and test drive the machine at any time by prior telephone arrangement. Just call if you have any questions. Transport is no problem. All details provided without guarantee. Errors and prior sale excepted. Pgsdpfxjyz Hwlj Aaysr

Condition: used, functionality: fully functional, Year of construction: 2002, 2 x bar stacking machines / bar forming machines / bar extension units, each with a palletizer, manufactured in 2006. Manufacturer: Müller Martini Model: Avanti Podpfx Aozupizoayogr Year of manufacture: 2001/2002 Condition: 1 unit is functional and 1 unit has been partially dismantled and is no longer in production.

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Condition of guideways: "Good" -Optional 3-axis digital display -Center height 165mm -Swing over bed 330mm -Distance between centers 800mm -Spindle speed range 28-2800 rpm Pgjdpfx Aaezta Dmsyjr -Automatic longitudinal / crossfeed -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Collet chuck - quick-change system -Four-jaw chuck -Multifix base and insert -Chuck guard -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2.0 x 0.8 x 1.6 meters / Weight 850 kg