Used Romania Central String for sale (10,575)

Condition: ready for operation (used), Romanian Lathe SN 1800x3000 Manufacturer Uppetrom 1 MAY Chuck diameter 1800 mm Max swing over bed 1800 mm Length between centers 3000 mm Lrjdpjv Uaufofx Amzou Max swing over slide 1450 mm Max weight of work piece between centers 25,000 kg Movie with machine underpower available

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Ljdpsz Nkuajfx Amzsru Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: good (used), Year of construction: 2014, Starting points Trays : Vacuum drawn ‘Norm Pack 418’ tray. Stack height : 50 trays. Capacity : Maximum 1,000 trays, gross, per hour. Description Conveyor belt: Stacks of trays are manually placed on the conveyor belt. The stacks may be up to 50 trays high. The conveyor has a length of 5,500mm, which can accommodate 20 stacks of 50 trays. The stacks of trays are transported to the destacker when there is demand from the destacker. Snarenband: Snare belt transports trays from conveyor belt to roller conveyor On the string belt, the trays are destacked , a label is stuck , the label is pressed around the corner and stacked up Unstacker: The destacker is used to unstack the stacks of trays. Grippers are mounted on the lifting table of the destacker, which pull the tray to be destacked down with it.When building the destacker, a maximum tray width of 300 mm was taken into account. Stickers are printed, glued and pressed around the corner: Next to the string belt, there is a height-adjustable leg on both sides with a label printer and sticker on it. All labels must be made with 1 label programme. This label programme runs on a PC. there is no PC at this machine The label is stuck on the vertical part of the tray. Empty stickers are printed using 2 high-speed printers. Can have a logo, price, barcode. Anything is possible. Example, see easygrow sticker. The printers are sold in the state as they are now. Lrjdpez Rcd Njfx Amzsu Stacker: Stacker is used to stack labeled trays. The stacking height is 50. The stacker is also designed for a tray width of up to 300 mm. The formed stack is discharged to roller conveyor Roller conveyor: On the roller conveyor, the formed stacks are buffered. The roller conveyor is six metres long which accommodates 22 stacks of trays. Control: All machines are controlled from a central control cabinet. The control cabinet contains a PLC of the brand Omron. Last used 1 year ago. Used for 9 years More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Ljdpfx Amoz I S Uwozsru Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 0307-1866 Operating hours: 9,316 h Control system: Siemens SINUMERIK 840 Dsl Working height: approx. 1,300 mm Electrical Data Ljdpfx Amjz Uhydezoru Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Workpiece Area Workpiece length: min. 780 mm Workpiece length: max. 3,000 mm Workpiece diameter: min. 20 mm Workpiece diameter: max. 200 mm Workpiece weight: max. 250 kg Workpiece Drive and Clamping Workpiece drive/clamping: 2 × hydraulically actuated front chucks, manufacturer SAV Chuck bore: max. 210 mm Spindles Spindle power: 2 × 37 kW Speed: 2,200 rpm Cross slide NC1, left X1-axis: 450 mm Z1-axis: 1,980 mm Cross slide NC2, right X2-axis: 450 mm Z2-axis: 1,980 mm M-head slide Q1-axis, left: 1,980 mm Q2-axis, right: 1,980 mm Tailstock and steady rest slide W1-axis, left: 1,980 mm W2-axis, right: 1,980 mm Rapid Traverse Rapid traverse speed: max. 20 m/min EQUIPMENT Portal loading system PROMAT 2 loading units Chip conveyor Coolant system Matching VDI 50 tool holders Partially powered VDI 50 tool holders Chuck jaws Documentation

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16th to November 26th. Lredpfx Amo Aaqz Tjzou TECHNICAL DETAILS General Information Machine Number: 00071830 Hours Read: 3,143 h Control System: Siemens Sinumerik Electrical Data Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 24 V Rated Power: 150 kW Working Area Maximum Height: 1,270 mm Number of Turrets: 2 Workpiece Length: min. 700 mm Workpiece Length: max. 2,400 mm Workpiece Diameter: min. 50 mm Workpiece Diameter: max. 200 mm Main Spindle Main Spindle Drive Power: 2 × 37 kW Chuck Bore: max. 210 mm Chuck Data Piston Stroke: 25 mm Stroke per Jaw: 11.1 mm Actuation Force: max. 52.5 kN Actuation Pressure: max. 30 bar Speed: max. 2,000 rpm Transport Transport: possible on a standard truck EQUIPMENT Loading System Large quantity of VDI 50 tool holders Partially powered VDI 50 tool holders Partially standard VDI 50 tool holders Workbench Workshop drawer cabinet Extensive documentation

Year of construction: 2002, condition: repair required (used), ULMA, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out the tray. • Gravity and motorized exit conveyors: inline, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centring device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high-performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethene and polyolefines. TECHNICAL FEATURES (Depend on the model) • 1 or 2 film rolls with automatic roll selection. • Automatic recognition of the tray dimensions or manual. • Automatic or manual selection of film length and width. • Universal elevator. • Self-diagnostic capability. Lrodpfjg H Tqujx Amzeu • Film tension control. • Forward and reserve jog capability. • 4-way film stretch with lateral pre-stretch. • Temperature control for the sealing belt. • Oversize package detector. • Mechanical torque limiter. • Guards and safety devices according to international standards. • Heavy duty construction with corrosion-resistant material. Power supply: 380 V, 12 kW Bizerba GV labeller, manufactured in 2002 Bizerba 18A scale with Bizerba AB display. Automatic labelling and weighing system for products packaged in the food area. Electric power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Compressed air supply of the blower label: air pressure: 6 bar, air flow: min. 100 l / min, compressed air. without oil, filtered at 10 µm, Label dimensions: 100x100. The separation between labels: from 2 to 20 mm. Thermal print head - resolution of 8.0 points Weighing from 1gr to 6000gr. Maximum labelling capacity 60 packages/minute. Equipment prepared for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment was reviewed, rebuilt, and guaranteed with the following maintenance: change of conveyor belts, thermal print head, and engine belts. High-quality equipment and great performance in terms of speed and reliability. The label and the scale are mounted on an output conveyor belt. Weighs at least 40 g up to a maximum of 18 kg For the Romanian companies, there is the possibility of selling in instalments. Price upon request, FCA: Oradea/Romania We sell this line refurbished Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Lsdpfx Amop S Tlhszeru Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread Lrodpfx Aex Hkd Homzou - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: Lrsdpfx Ajhgg Euomzou PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Operating hours: 14,081 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Mast type: Duplex mast Lifting height: 4,450 mm Fork length: 2,000 mm Side shifter: present 3rd hydraulic valve: present 4th additional valve: present, free for fork positioner Free-lift mast: without central hydraulic cylinder Tilt angle indicator: present Drive and Performance Drive type: LPG Load capacity: 3,500 kg Operating hours: 14,081 h Inspection and Maintenance UVV valid until: 05/2027 Next service due in: 420 h MACHINE DETAILS General Manufacturer: Linde Type: H35T EVO Year of manufacture: 2019 Own weight: 5,030 kg Dimensions Overall length: 4,800 mm Overall width: 1,350 mm Overall height: 2,964 mm EQUIPMENT Full cabin with heater and windshield wiper LED work light front LED work light rear Safety Light rear Safety Light side Comfort seat with lumbar support Lodpfxjz R Dzpj Amzsru Seat heating All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 189

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9611-1806, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 9611-1806 Control system: Siemens SINUMERIK Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Working Area Maximum turning height: 1,240 mm Maximum turning length: 2,000 mm Spindle bore: 130 mm Chuck diameter: max. 130 mm Torque: max. 460 Nm Cross slide travel: 200 mm Ljdpsz Uql Aefx Amzeru Tool Holder Tool holder: VDI 40 Tailstock Taper: MK 5 Tailstock diameter: 90 mm Automatic tailstock quill travel: max. 150 mm Transport Transport: possible on a standard truck EQUIPMENT Workshop cabinet Large quantity of VDI 40 tool holders Coolant system Loading system

Condition: new, Year of construction: 2024, Description AORE S1530: (3 Kw) from stock our Demo machine. table length 3.060 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4950x2280x2130 mm weight of the machine ca. 4.550 kg Furnishing: Lsdsyutm Sopfx Amzoru - Max-photonics Laser source 3 Kw - Cyp-cut- (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nestling, With leapfrog, Edge seeking, Fly cutting - 27" touchscreen, keyboard, control panel - central Lubrication system Cutting capacities: - normal steel 18 mm - stainless steel 10 mm - aluminium 10mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 100 mm - Axis speed X / Y: 80 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm – Acceleration max. 0,8 G table change manual: - table load 800 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Spare part basic supply package - cutting from reflective sheet metal materials - Machines for cutting sheets metal - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m / min. - Accelerations up to 0.8 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components Like: - Yaskawa servo drives - Hiwin linear rails - Tongfei water chiller dual use - 2 CCTV camera’s on screen - Auto central lubrication .- Touch screen .-.YYC/APEX rack and pinion .- standard delivery is with power stabilizer - TBI high precision ball screw for Z axis - saw tooth blade table - air and gas pressure real time monitoring - CE declaration Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired Lredpfx Amoz Rqcmozju TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PH3015: (6 kW) New from stock We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 25 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives Lredpfjix Nn Uex Amzeu -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2025, laser power: 3,000 W, table length: 3050 mm table width: 1530 mm laser head: ( SWISS RAYTOOLS ) autofocus laser capacity: 3kW overall dimensions: 5000 x 2250 x 2000 mm weight of the machine ca.: 3.300 kg Furnishing: - Max-photonics Laser source 3kW - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 18,5" screen, keyboard, control panel - central Lubrication system Cutting capacities: - normal steel:10 mm - stainless steel: 5 mm - aluminium: 5 mm - brass: 4 mm - copper: 3 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel: 1500 mm - Y-axis travel : 3000 mm - Z-axis travel: 120 mm - Axis speed max X / Y: 80 m/min - Positioning accuracy:: +/- 0.05 m - Reputability accuracy :+/- 0.03 mm - Acceleration max. :0.8 G - automatic change, max load on tables: 500 kg. assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - part trolly under work table for collecting small parts - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 80 m/min. - Accelerations up to 0.8 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head Lredpfx Asix Nkbsmzju -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 20 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Ledpfx Ao Aayk Rsmzjru Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Lredpfeztc Tdox Amzju Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: used, machine/vehicle number: PKY391L00221, Year of construction: 2022, operating hours: 15,536 h, load capacity: 2,000 kg, lifting height: 3,150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,150 mm MACHINE DETAILS Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,150 x 2,196 mm Self-weight: 3,290 kg Next service due in: 464 hours UVV certificate valid until: 06/2027 Tires replaced: 06/2026 Operating hours: 15,536 hours EQUIPMENT Facelift model with tilt angle indicator Clear-view mast without central hydraulic cylinder 3rd hydraulic valve Side shifter Full cabin Air conditioning Heater Ljdjz Nxf Tepfx Amzeru Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Seat heating LPG gas tank All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is carried out at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 181

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Lrsdpfx Amevcbrhjzou Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PG3015: ( 3 Kw) 40 sold in 10 month. We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 5.400 kg Furnishing: - Max-photonics Laser source 3 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 3 Kw ) - normal steel 20 mm - stainless steel 10 mm - aluminium 10 mm - brass 9 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: Lrodpfx Amjlkgd Iezsu - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Stroke 500mm, 320mm and 200mm Lrjdpfstz S Hcox Amzju

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central welding fume extraction Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62185 Year of manufacture: 2014 Nominal volumetric flow rate 3000 m³/h Nominal volumetric flow rate 50 m³/sec. Lredpfxjz Db Nio Amzju Filter area 27 m² (9 units, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Power connection 400 Volt, 50 Hz. - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control system - Control cabinet fixed to the extraction system - 9 filter cartridges, type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter change - Radial fan installed at the top inside, type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Fire water connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: good (used), Year of construction: 2015, Central pallet supply system Consisting of a transport trolley running underneath the palletizers. The track is integrated into the floor. Portal for pallet infeed. 4 stack positions for empty pallets. 1. Transport Trolley: Automatically moves underneath the palletizers. Distributes empty pallets to the correct positions. Track is integrated into the floor for a flat and safe working surface. 2. Pallet Infeed Portal: Central entry point for new pallets. Handles up to 4 stacks of empty pallets. The track is incorporated into the floor Ljdpfez Rctwsx Amzoru More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: new, Year of construction: 2025, Description AORE PG6020: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 6050 mm table width 2050 mm Lodpoiyun Rofx Amzsru laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 12 overall dimensions 14.000 x 3.400 x 2.400 mm weight of the machine ca. 13.450 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 40 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 6000 mm - Y-axis travel 2000 mm - Z-axis travel 375 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (23 second max for changing) - automatic change, max load on tables 2.400 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland