Used Romer Drying Oven for sale (3,789)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Nwsdpfxsfzb Nio Ai Tjn 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Nwedpeyg H Dzsfx Ai Tsn 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Nodpfx Aiefzb Nbe Tewn 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 12 h, power: 30 kW (40.79 HP), input voltage: 380 V, temperature: 200 °C, inner dimension length: 1,200 mm, inner dimension width: 1,700 mm, inner dimension height: 2,300 mm, total length: 1,500 mm, total width: 2,200 mm, total height: 2,800 mm, overall weight: 400 kg, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, Professional Composite Curing Oven – Romer SL Internal Dimensions: 1200 × 1700 × 2300 mm High-performance industrial composite curing oven from the respected Polish manufacturer Romer, designed for advanced composite manufacturing processes including carbon fiber prepreg curing, drying, post-curing, and thermal processing applications. This electric batch oven is ideal for aerospace, automotive, marine, motorsport, and industrial composite production environments where accurate and stable temperature control is essential. Constructed with a heavy-duty steel frame, stainless steel internal chamber panels, and durable powder-coated external finish, the oven is built for continuous industrial operation and long-term reliability. The smart control system delivers precise temperature management, efficient power consumption, and controlled heating/cooling performance. The integrated air circulation and ventilation system ensures uniform heat distribution throughout the chamber for consistent curing quality. Key Features: • Maximum operating temperature: 200°C • Internal dimensions: 1300 × 1800 × 2000 mm • Designed for composite prepreg curing applications • Heavy-duty industrial construction • Stainless steel internal chamber • High-efficiency hot air circulation system • Accurate programmable temperature control • Multi-stage curing program capability • Controlled heating and cooling cycles Nwodpfx Asy Tvvzei Tjn • Uniform temperature distribution • 8 internal vacuum inlets installed inside the chamber • Vacuum pump included in the sale • Suitable for carbon fiber, fiberglass, prepreg, tooling, and composite components Applications: • Carbon fiber prepreg curing • Composite part manufacturing • Aerospace and motorsport components • Marine composite production • Tooling and mold post-curing • Drying and thermal treatment processes • Research & development and prototype manufacturing The oven is in very good working condition and can be inspected and tested on-site.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Nwsdpsfz U Nbefx Ai Tjn Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: AC, total length: 16,000 mm, total width: 8,000 mm, input frequency: 50 Hz, temperature: 58 °C, heating capacity: 120 kW (163.15 HP), NEDERLANDS Gebruikte SCHIELE Trockenkabine 80mm MW – Doorloopdroogcabine met elektrische uitrusting en schakelkast Wij bieden deze gebruikte SCHIELE-doorloopdroogcabine aan, inclusief elektrische uitrusting en schakelkast. Fabrikant: SCHIELE Model: Trockenkabine 80mm MW Bouwjaar: 2012 Ordernummer: 21204763 Beschrijving - 2 identieke compartimenten - Afmetingen per compartiment: 8 m breed × 16 m lang - Elk compartiment beschikt over een eigen verwarmingssysteem, circulatieventilatoren en gasbrander. Technische specificaties per compartiment Verwarming - Verwarmingsmedium: aardgas H - Verwarmingsvermogen: 120 kW - Maximale droogtemperatuur: 58 °C - Maximale temperatuur verwarmingsoppervlakken: 58 °C Luchtstromen - Circulatielucht: 2 × 22.500 m³/h (totaal 45.000 m³/h) - Regelbare toevoer verse lucht: 900–3.600 m³/h - Minimale afvoerluchtstroom bij 20 °C: 900 m³/h Ventilatoren en motoren - Circulatieventilatoren: 2 × 7,5 kW (totaal 15 kW) - Toerental: 1.450 rpm - Afvoerventilator: 1,5 kW - Toerental: 1.450 rpm Maximale oplosmiddeldoorvoer - 7.600 g/h (7,6 kg/h) Gasbranders – Weishaupt WG10N/1-D ZM-LN Elk compartiment heeft één gasbrander. De eerste foto toont het typeplaatje. - Vermogen: 25–110 kW - Regeling: modulerend / tweetraps - Brandstof: aardgas; LPG-geschiktheid afhankelijk van de configuratie - NOx-klasse: klasse 3 - Voeding: 230 V, 50 Hz - Gewicht: ca. 14 kg per brander Voor meer informatie kunt u ons een bericht sturen of telefonisch contact opnemen. ENGLISH Used SCHIELE Trockenkabine 80mm MW – Continuous-flow drying unit with electrical equipment and control cabinet We offer this used SCHIELE continuous-flow drying unit, complete with electrical equipment and control cabinet. Manufacturer: SCHIELE Model: Trockenkabine 80mm MW Year of construction: 2012 Order number: 21204763 Description - 2 identical chambers - Dimensions per chamber: 8 m wide x 16 m long - Each chamber has its own heating system, circulation fans, and gas burner. Technical specifications per chamber Heating - Heating medium: H-grade natural gas - Heating capacity: 120 kW Nsdpfxj Aax Ibe Ai Tewn - Maximum drying temperature: 58 °C - Maximum temperature of heating surfaces: 58 °C Airflows - Circulation air: 2 x 22,500 m³/h (total 45,000 m³/h) - Adjustable fresh air supply: 900–3,600 m³/h - Minimum exhaust airflow at 20 °C: 900 m³/h Fans and motors - Circulation fans: 2 x 7.5 kW (total 15 kW) - Speed: 1,450 rpm - Exhaust fan: 1.5 kW - Speed: 1,450 rpm Maximum solvent flow rate - 7,600 g/h (7.6 kg/h) Gas burners – Weishaupt WG10N/1-D ZM-LN Each chamber has one gas burner. The first photo shows the burner's nameplate. - Capacity: 25–110 kW - Control: Modulating / two-stage - Fuel: Natural gas; LPG compatibility depends on the configuration - NOx class: Class 3 - Power supply: 230 V, 50 Hz - Weight: Approx. 14 kg per burner For more information, please send us a message or contact us by phone.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 Nwedofz I Rxjpfx Ai Ten ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), Year of construction: 2007, Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven Nsdpfjz Tfc Tex Ai Tjwn -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Nodpfefz Nd Iox Ai Tjwn Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Nsdpfofy T Spsx Ai Tjwn Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Nwsdefx Nfmopfx Ai Ten Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Thermo Scientific Nwsdpfx Ajziy D Eoi Ten   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application   For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20   Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.

Condition: used, Binder Safety Vacuum Drying Oven Binder VDL 115 Safety Vacuum Drying Oven ATEX version for potentially explosive areas Nodeznbm Eepfx Ai Tswn For sale is a used safety vacuum drying oven from the manufacturer BINDER GmbH. The vacuum drying oven is suitable for gentle drying, degassing, and conditioning of temperature-sensitive materials under vacuum, as well as for applications with flammable solvents. Technical data Manufacturer: BINDER GmbH Type: VDL 115 Device type: Safety vacuum drying oven Internal volume: approx. 115 liters Internal dimensions: approx. 506 × 460 × 506 mm (W × D × H) External dimensions: approx. 743 × 581 × 942 mm (W × D × H) Weight: approx. 158 kg Temperature range: approx. +9 °C above ambient to +110 °C Ultimate vacuum: up to approx. 0.01 mbar Electronic temperature and pressure control Rated temperature: 200 °C Rated power: 1.90 kW Mains connection: 230 V / 1N~ Rated current: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Temperature protection: DIN 12880 Class 2.0 Item number: 9030-0012 Equipment ATEX version Electronic temperature control Vacuum indicator Digital display Viewing window in the door Stainless steel interior Several insertion levels Connection for vacuum Connection for inert gas Original brief operating instructions on the device Application areas Chemical laboratories Pharmaceutical laboratories Research and development Quality control Material testing Gentle vacuum drying Degassing and conditioning Condition Used Optical condition as shown in the pictures Scope of supply 1x Binder VDL 115 Safety Vacuum Drying Oven Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Nwjdofzccnjpfx Ai Ten 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 100cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius external dimensions: Nsdpfx Aisvpagde Tswn

Condition: used, Binder Type: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven for professional use in laboratories, industry, and research. Device description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The device is specifically designed for applications involving flammable solvents and meets high safety requirements (ATEX version). Due to the precise control of temperature and pressure, the device is ideally suited for reproducible laboratory and industrial processes. Typical applications: Chemical and pharmaceutical laboratories Research & development Quality control Industrial drying processes under vacuum Temperature / Vacuum: Temperature range: +9 °C above ambient to approximately +110 °C Final vacuum: up to approximately 0.01 mbar Electronic temperature and pressure control Equipment: Safety glass pane with splinter protection ATEX-compliant design Several insertion levels (number depending on the configuration) Connections for vacuum and inert gas Dimensions: Internal volume: approximately 115–119 liters Internal dimensions (W × D × H): approximately 506 × 460 × 506 mm External dimensions (W × D × H): approximately 743 × 581 × 942 mm Nwodpsziyymofx Ai Tsn Electrical data: Rated power: 1.90 kW Mains connection: 230 V / 1N~ Current consumption: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Rated temperature: 200 °C Temperature protection: DIN 12880, Class 2.0 Weight (empty): approximately 158 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2000, functionality: fully functional, inner dimension width: 1,100 mm, total length: 10,000 mm, total width: 1,900 mm, Equipment: CE marking, Drying oven used for lacquered and painted sheets. Nwedpezbat Ejfx Ai Tsn

Condition: used, Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven If very different products or product parts with equally different processing times are to be treated independently of each other in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in each drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, in a stabilized state: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel frame, on which the outer cladding made of unalloyed steel is mounted, painted in RAL 1013 (pearl white). The oven inner casing is made of aluminized sheet steel. The insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of mineral wool. Floor: As with the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable loading height of 120 mm. Maintenance doors: 2-wing maintenance door on the rear of the oven. Secured with screws. Nsdpfxjim Ik Se Ai Tewn This door enables complete access to the inside of the oven. Handling of the parts: The handling of the parts is ensured via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a closing piece on the drawer bottom to reduce heat loss when opening. Each drawer has a usable load capacity of 120 kg with load distribution over the entire area. Load peaks of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured via electromagnets and controlled by the Siemens system. Time control of the minimum preheating time with a timer per drawer (located in the control cabinet). Time control of the maximum preheating time with a timer per drawer (located in the control cabinet). A temperature display is provided for each drawer. These displays will be arranged on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation rate: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes - new and used - in our shop! International shipping costs on request!

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Nwedjfzb Rcspfx Ai Tsn 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), SAT heating cabinet, oven, drying cabinet, up to 185 °C Nwsdpfx Aozwddrji Ton Interior dimensions: depth 1.75 m, width 2.10 m, height 2.28 m.

Condition: ready for operation (used), Heraeus UT 6060 Heating Oven No. 415 Max. 300°C Dimensions: External: 750mm x 730mm x 580mm (L x W x H) Internal: 400mm x 350mm x 380mm (L x W x H) Further technical data can be found in the images. You are welcome to come and inspect the oven. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Nwedpfxjlt Ut Rj Ai Tsn Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, SNOL Type: SNOL 120/350 SNOL heating and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 Nodpjziiutefx Ai Tswn For industrial applications. Max. 350°C Internal volume: 120 liters Internal dimensions: 555x350x555 mm 400 volts, 50 Hz, 6 kW Vertical air circulation via built-in fan, over-temperature protection Chamber made of stainless steel Door hinge on the right, includes two shelves Low power consumption Fast heating and cooling times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 2391, Offer 25398 Nsdpfxjygk A Ij Ai Town Technical Data: - Temperature continuously adjustable up to 300 °C - Power supply: 220 V - Usable internal chamber: 300 x H 530 mm - Space requirement: approx. 700 x H 750 mm - Weight: approx. 25 kg

Condition: used, Vötsch Type: NTU 60/60 Rated temperature: 250°C Connection voltage: 400 V 3 (N) PE AC, 50/60 Hz Njdpfxszdiyhj Ai Tswn Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Width 1000 mm, Height 1675 mm, Depth 1300 mm Forced air circulation fan Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, PINK Type: PINK VT 300-600-300-1 Vacuum drying oven Nsdpfxozdi Ivj Ai Tswn Space requirements for operation and maintenance Width min. 3000 mm, Height min. 2500 mm, Depth min. 2500 mm Dimensions VT External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber: 79 liters Operating temperature: min. 20°C, max. 150°C Electrical connection: Connection power 3 x 400 V; 50 Hz N / PE 8.5 kVA Heating power: 6 kW Cooling power: 6 kW at 15°C medium temperature and 15°C cooling water Heating: Floor, ceiling, side walls and door double-walled, heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 Pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system: 3 bar Weight: 300 kg Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.