Used Romer Piece Sw for sale (10,840)

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Dcedpfxofzb Nbe Ad Neg 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end Dodpfxefy Txys Ad Necg The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Dsdpfxefzccne Ad Njcg 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Dcedefzb Niepfx Ad Neg Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Dedpfeyg H Dzox Ad Nscg 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Dodjfz Anpspfx Ad Njcg Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ Djdpfsfz I Rxsx Ad Nocg 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Dcedpsfzb Rcsfx Ad Nsg ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. Dodpfjfz U Tqex Ad Nscg In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events Dcodpefz Apqsfx Ad Neg You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 1997, condition: ready for operation (used), A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible. Djdpfx Aey Hvrped Njcg

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpm Movement X/Y/Z : 600/630/510 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Dcedpfx Aey Hntxjd Neg Control system:Siemens 840 Dsl Travel range X/Y/Z:600/630/510 Spindle centre distance:600 mm Rapid traverse X/Y/Z:120 m/min Spindles (2 pieces): Technology:Motorised spindles Speed:17,500 rpm Power:35 Nm Torque:80 Nm Tool holder:HSK 63 Swivel mount: Technology:A-axis or U-axis with counter bearing Drive:Direct drive (torque motors) Clamping bridge: Technology:Clamping bridges, each with 2 NC rotary tables Drive:Direct drive (torque motors) Table diameter:Ø 340 mm Max. table load:2 x 90 kg Max. fixture dimensions:2x Ø 600 x 400 mm Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:2 x 72 Max. tool diameter:80 mm Max. tool length:425 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Drive systems:Direct on all axes (linear motors) Hydraulic clamping:2x 3-circuit Chip removal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Separate cooling unit Support control:Pneumatic Tool breakage detection:Inductive Automation preparation:Profinet interface, automatic doors, automatic rinsing cycle

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpm Movement X/Y/Z : 600/650/500 mm Tool holder : HSK 63 Dedpfxsy Ha A Es Ad Njcg In General: Year of manufacture:2020 Control system:Siemens 840 Dsl Travel range X/Y/Z:600/630/500 Rapid traverse X/Y/Z:120 m/min Spindle: Technologie:Motorspindeln Drehzahl:17.500 U/min Leistung:35 Nm Drehmoment:80 Nm Werkzeugaufnahme:HSK-63 Swivel mount: Technology:A-axis or U-axis with counter bearing Drive:Direct drive (torque motors) Clamping bridge: Technology:Clamping bridge with 1x NC rotary table each Drive:Direct drive (torque motors) Table diameter:Ø 340 mm Max. table load:150 kg Max. fixture dimensions:Ø 675 x 450 mm Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:105 Max. tool diameter:80 (160) mm Max. tool length:450 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Drive systems:Direct on all axes (linear motors) Hydraulic clamping:2x 3-circuit Chip removal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Separate cooling unit Support control:Pneumatic Tool breakage detection:Inductive Automation preparation:Profinet interface, automatic doors, automatic rinsing cycle :

Condition: excellent (used), mileage: 623,911 km, power: 338 kW (459.55 HP), first registration: 07/2020, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: liquefied natural gas (LNG), color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,250 mm, total width: 2,550 mm, Year of construction: 2020, WJMMG2ATZ0C430859 = More information = Number of cylinders: 6 Engine capacity: 12.900 cc Empty weight: 8.302 kg Carrying capacity: 11.498 kg GVW: 19.800 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: 95-BPR-3 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Djdpfsymp Tlex Ad Necg Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460062, Technical Specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis Description: 3 Linear Axes (X, Y, Z) + 1 Rotational Table Axis (A-axis) with index divider head, equipped with direct angular measuring system, number of revolutions: 50 minˉ¹, accuracy +/- 5" # Maximum Clamping / Part Size: Ø 575 x 830 mm; maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z: 65/75/75 m/min; Positioning Accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1–17,500 rpm # Spindle Interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic Tool Changer: 2 x 32 tool positions, chip-to-chip average time: 2.5 sec # Max. Tool Dimensions: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Specifications: # Voltage: 3x400V / 50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Conveyor: Knoll Type 550 K-1 # Oil Cooling System # High-Pressure Oil Filtration System (max 80 bar): Knoll VRF 450_2350 # Cooling System for Shaft, Guides, and Switchboard # 2 Oil Lubrication Units # Oil Vapor Extraction/Recovery System: IFS Vario E2000 (2,000 m³/h) # Fire Suppression System: Kraft & Bauer # Part Presence Detection: via low-pressure air sensors # In-Process Control: Marposs T25 # Tool Breakage Monitoring and Length Measurement: inductive sensor # Tool Holder Detection in Work Spindle Dcedpfsxw Syuox Ad Nsg Machine Condition: Operational

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 2460061, Technical specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A) + indexable dividing head with direct angular measurement system, max rotational speed 50 rpm, accuracy +/- 5 arcseconds # Max. clamping dimension/part: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse (X/Y/Z): 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance between spindles: 300 mm # Spindle speed range: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x32 tools / average chip-to-chip time 2.5 s # Max. tool Ø 75 mm / max. length 275 mm / max. weight 7.5 kg Electrical data: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling unit # Spindle, guideways, and switchboard cooling system # 2 oil lubrication units # Oil mist extraction/recovery system: ELBARON Vario E2000 (2,000 m³/h) # Oil filtration system with paper filter, max. 80 bar: Knoll KF200/1200 # Fire suppression: Kraft & Bauer # Part presence monitoring P/Y: with low pressure air detectors # In-process measurement: Marposs T25 # Tool breakage monitoring & length measurement: inductive sensor # Tool holding confirmation in main spindle Machine status: NOT OPERATIONAL # Motorised loading/unloading door # Table A axis # Tool magazine chain # Euchner safety switch, loading door # 5 hydraulic switches (Parker) # 2 pneumatic pistons for tool magazine access # 2 pneumatic pistons for tool clamping # Complete hydraulic system # Hydraulic motor (motor can also be retrofitted) # Compressed air regulator # Chip conveyor/extractor – needs repair # Z-axis linear scale # X-axis linear scale # Numerical control flash card # 4 communication modules (Murr) # 1 of 2 spindles defective – replacement spindle available in stock Dsdpexw R Udjfx Ad Nocg

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm Djdpsxxrnbjfx Ad Nocg # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460038, Technical specifications: Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head - Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5'' Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm Spindle spacing: 300 mm Dcedpfx Adoxxrc Ss Nog Spindle speed range: 1–17,500 rpm Spindle taper: DIN 69893-HSK-A63 (internal coolant supply) Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg Electrical data: - Supply voltage: 3x400 V / 50 Hz - Installed power: approx. 85 kVA / 125 A Machine dimensions: - Installation area: approx. 3.6 x 6 x 3.7 m - Weight: approx. 10,500 kg Equipment includes: - CNC control: Siemens 840D SL - Linear axis measuring systems: Heidenhain linear scales - Chip conveyor: Knoll Typ 550 K-1 - Oil cooling system - Shaft, guideway, and switch cabinet cooling system - 2 oil lubrication systems - Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h) - Fire protection: Kraft & Bauer - Workpiece presence detection (P/Y): Low pressure air sensors - In-process measurement: Marposs T25 - Tool breakage control and length measurement system: Inductive sensor (BRK) - Tool support detection in working spindle Machine status: NOT OPERATIONAL / NON-FUNCTIONAL Installed components: - Sensors for tool presence in spindle & part presence - Hydraulic pump - Hydraulic unit level & temperature sensors (Parker) - Tool magazine piston & sliding door system (2 units) - Communication module: Murr - A-axis position encoder - Hydraulic switches (Parker, 4 units) - Emulsion filtration unit is shared with another machine (SW BA321 2460038) - High-pressure pump from emulsion filtration system

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems # 2 oil lubrication circuits # Oil mist absorption/recovery system Dedpfx Adoxxkd Uj Njcg # Tool breakage and length measurement: Blum Novotec # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 1830108, Technical specifications: # Machining workspace: X 300 mm; Y 650 mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A-axis), 360° indexable dividing head (resolution 0.001°) # Number of pallets: 2; Maximum table load: 400 kg # Maximum clamping/part size: Ø 575 x 830 mm; maximum weight: 360 kg # Rapid traverse rate: X/Y/Z 75/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Number of spindles: 2 / spindle spacing: 300 mm # Spindle speed: 1–10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools / chip-to-chip time approx. 2.5 s # Tool max. Ø75 mm / length max. 275 mm / max. weight 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 70 kVA / 125A Dimensions: # Installation footprint: approx. 3.9 x 3.2 x 3.1 m # Weight: approx. 10,500 kg Scope of supply: # CNC control: Fanuc 30i-Model A # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling unit Dcodpfx Adsxw Ukvj Njg # High-pressure oil filtration system max. 40 bar: Knoll AE 1060 # Cooling system for spindle, guides, and switch cabinet # 2 oil lubrication units # Part present sensing (P/Y): with low-pressure air sensors # Broken tool detection: Blum Novotec Laser Light Probe # Tool support detection system in working spindle Machine condition: NOT OPERATIONAL # Magazine chain broken — REQUIRES REPLACEMENT

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460065, Technical specifications: # Machining Workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotational table axis (A) and 2 rotational axes (B) with indexer head - Direct angular measuring system, maximum rotational speed: 50 min⁻¹, accuracy: +/- 5" # Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum workpiece weight: 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle taper: DIN69893-HSK-A63 (internal coolant supply) # Automatic tool changer: 2x32 tools, chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / max. length 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring device: Heidenhain linear scales # Chip conveyor/extractor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max 80 bar: Knoll 550 K-1 450_2450 (can service 2 machines simultaneously) # Shaft cooling system, guideways, and control cabinet # 2 oil lubrication units # Oil vapor absorption/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire protection: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process control: Marposs T25 # Tool breakage monitoring and length measurement: inductive sensor # Toolholder detection system in working spindle # Documentation: Manuals only (printed) Machine condition: Dodpfsxw Ttiex Ad Necg Operational / In working condition.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460043, Technical specifications: # Machining workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis A (rotary table) and 2 rotary axes B (indexing divider head) with direct angular measurement system, max. rotational speed 50 rpm, accuracy ± 5" # Max. clamping/part size: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse speeds: X/Y/Z – 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tool positions / chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / length max. 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max. 80 bar: Knoll 550 K-1 450_2450 (can serve two machines simultaneously) # Cooling system for spindle, guideways, and control cabinet # 2 oil lubrication systems # Oil vapor extraction/recovery unit: IFS Vario E2000 (2,000 m³/h) # Fire suppression: Kraft & Bauer # Part presence detection: pneumatic detectors (low pressure) # In-process measurement: Marposs T25 # Tool breakage monitoring and length check: inductive sensor # Tool holder detection in spindle Dcjdpfexwvr Ijx Ad Njg # Documentation: operating manuals only Machine condition: Operational / In production

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg Dodpfxoxwvlno Ad Necg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1-17,500 rpm # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Machine Condition: Fully operational

Condition: repair required (used), Year of construction: 2001, functionality: not functional, machine/vehicle number: 1640137, Technical characteristics: # Machining workspace: X 400 mm; Y 450 (700) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 2 rotary tables A1/2 NC (33.3 rpm), with hydraulic clamping mounted on indexable rotary table A3 (0 to 180° in approx. 4 sec). # Rapid traverse speed: X, Y, Z 1–40,000 mm/min # Positioning accuracy Tp: 0.01 mm # Distance between spindles: 400 mm # Spindle speed: 50–12,500 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x30 tool positions / chip-to-chip time 4.5 sec # Maximum tool diameter 75 mm / Maximum tool length 275 mm / 10 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 68 kVA Dimensions: # Installation footprint: approx. 6.35 x 4.5 x 4.2 m # Machine dimensions: approx. 4.6 x 3.0 x 3.0 m Dcjdpfx Adexvyfve Nog # Weight: approx. 13,800 kg Equipment includes: # CNC controller: Siemens 840C # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll 400K-1/950 RSF100 # Oil cooling unit # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil vapor extraction/recovery system # Tool presence detection system in spindle

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner Dcedpfx Aey Ah Rced Njg --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.