Used Rs-Simulatoren Thermal Shock Test Chamber for sale (20,360)

Condition: excellent (used), RS Simulators Type: ST2K320/45 K Shock test system, water-cooled Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Humidity levels in the upper test chamber Climate temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (± 2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dcsdpfx Adezgbutjrjn Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Total power: 13 kVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Refrigerating unit: Water-cooled Weight: approx. 940 kg Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Dsdswbdv Sopfx Adrjcn Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1999, Nema NCG 4390 S Temperature Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temperature Range: -40 °C to +180 °C Dew Point Range: +5 °C to +89 °C Supply Voltage: 400 V Rated Current: 32 A Rated Power: 15 kW Refrigerant: R 404 A Year of Manufacture: 1999 Weight: 2720 kg External Dimensions: W 3950 x D 1700 x H 2280 mm Dcodpfx Ajuzgt Ejdrsn Internal Dimensions: W 3000 x D 1300 x H 1170 mm WLG STEAM-O-MAT Electrically-controlled automatic steam humidifier and generator for mineral- and odor-free steam Manufacturer: WLG STEAM-O-MAT Type: EDB 8 Heating Voltage: 400 V Power: 6 kW Steam Output: 8 kg/h Water-cooled Condenser Manufacturer: Bitzer Water-cooled Supply Voltage: 400 V Rated Current: 13 A Rated Power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Vötsch VT 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Machine Type: Temperature Shock Test Chamber / Shock Test Chamber For sale is a used Vötsch VT 7012 S2 temperature shock test chamber with a hot and cold chamber, as well as a motorized moving platform. The system was developed for professional temperature cycling and temperature shock testing and is suitable for material testing, electronics and component testing, research and development, and quality assurance. Technical Data: Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -74 °C to +70 °C Temperature deviation (time): ±1.0 K Temperature deviation (spatial): ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Cable gland: Ø 67 mm Load between the shelves: max. 40 kg Total load of the moving platform: max. 20 kg Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Fuse (on-site): 32 A slow-blow Compressor power: 2 × 3 kW Dimensions: External dimensions (W × D × H): approx. 975 × 2,115 × 1,675 mm Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Weight: approx. 1,000 kg Equipment: Hot chamber Cold chamber Motorized moving platform Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Cable gland Ø 67 mm Water-cooled version Dcedpfx Adsz Ehuujrsn Operator terminal Signal light Transport data: Machine (W × D × H): approx. 975 × 2,115 × 1,675 mm Weight: approx. 1,000 kg Condition: Used Optical condition as shown in the pictures. Scope of supply: Vötsch VT 7012 S2 temperature shock test chamber Operator terminal Original operating manual Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown. Subject to changes, errors and prior sale.

Condition: excellent (used), Weiss TS 130 Thermal Shock Chamber Manufacturer: Weiss Umwelttechnik GmbH Model: TS 130 Machine type: Thermal Shock Chamber Test chamber volume: approx. 130 liters For sale is a used Weiss TS 130 thermal shock chamber with a hot and cold chamber, a movable lift basket, SIMCON/32 touch control, and a separate air-cooled condenser/cooling unit. The system is suitable for temperature cycling and thermal shock testing, environmental simulation, material and component testing, electronics testing, quality assurance, as well as research and development. Technical data: Hot chamber: +60 °C to +220 °C Cold chamber: -10 °C to -80 °C Switching time hot/cold chamber: approx. 10 seconds Temperature stability: ±1 K Internal dimensions (W × D × H): approx. 500 × 600 × 450 mm Max. load lift basket: 20 kg Max. load per insert rack: 10 kg Refrigeration system: Air-cooled refrigeration cascade Separate condenser/cooling unit as shown in the pictures High-stage refrigerant: R404A / 2.2 kg Low-stage refrigerant: R23 / 1.2 kg Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standby pressure: 11 bar g Electrical data: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14.0 kW Rated current: 26.0 A Connection type: CEE 32 A Control / Equipment: SIMCON/32 touch control Hot and cold chamber Movable 130-liter lift basket Test chamber door with viewing window Separate air-cooled cooling unit Operating hour counter SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Djdpjzp D D Nofx Adrjcn Dimensions / Transport data: External dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width incl. door hinge: approx. 1,850 mm Depth incl. removable door: approx. 1,155 mm Weight of test chamber: approx. 950 kg Separate cooling unit on pallet as shown in the pictures Freight / special transport possible Condition: Used - Year of manufacture 2008 Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Weiss TS 130 thermal shock chamber Separate condenser/cooling unit SIMCON/32 touch panel SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock testing system Operating climate range Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Dcedpfx Aszgbumsdrsn Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), ESPEC TSB-51 Temperature Shock Chamber Manufacturer: ESPEC CORP. Type: TSB-51 Machine Type: Liquid-to-Liquid Temperature Shock Chamber Bath Volume: 55 liters For sale is a used ESPEC TSB-51 Liquid-to-Liquid Temperature Shock Chamber. The system was designed for professional temperature shock testing and is suitable for material and component testing, electronics testing, quality assurance, and research and development. Technical Data: Model: TSB-51 Year of Manufacture: 2013 Operating Hours: 13,611.4 h Temperature Range Hot Bath: +70 °C to +200 °C Temperature Range Cold Bath: -65 °C to 0 °C Bath Volume: 55 liters Test Basket (W × H × D): 150 × 150 × 200 mm Power Supply: AC 400 V / 3 Phases / 50 Hz Max. Current Draw: 22 A Condensation Method: Air-cooled Refrigeration System: Refrigerant 1: R404A Refrigerant Quantity: 2.8 kg Refrigerant 2: R508A Refrigerant Quantity: 0.89 kg Condensation Method: Air-cooled Dimensions: External Dimensions (W × D × H): approx. 1,200 × 1,320 × 1,785 mm Internal Dimensions (W × H × D): approx. 290 × 350 × 520 mm Test Basket (W × H × D): 150 × 150 × 200 mm Weight: 800 kg Equipment: Programmable ESPEC controller with display Liquid-to-Liquid Temperature Shock Testing System Hot bath Cold bath Movable test basket Overcooling protection Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet interface USB interface Operating manuals as shown in the pictures Transport Data: Unit (W × D × H): approx. 1,200 × 1,320 × 1,785 mm Weight: approx. 800 kg Transport as a single unit Condition: Used Dcjdpfx Adjz Hb Tyorsn Unit starts / Display and controller active. Optical condition as shown in the pictures. Scope of Delivery: ESPEC TSB-51 Temperature Shock Chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Availability: By arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Djdpfx Aozpy Idodrjcn Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Dodpfjx Exmtex Adrscn Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), RS-Simulators Temperature Shock System ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Device Data Manufacturer: RS-Simulators Type: ST2K 1000 / 55 Design: Temperature Shock System Cooling: water-cooled Description Used temperature shock system for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Application in industry, automotive, research, and quality assurance. System Description 2 separate temperature chambers (hot / cold) Automatic horizontal test basket transfer Fast changeover for temperature shock tests Temperature ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test chamber Volume: approx. 580 liters Internal (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current consumption: max. 65 A Media connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: unpressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions: External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight: approx. 2800 kg Equipment: Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm) Observation window Internal lighting Controller SE-604 Program operation and data logging RS232 interface Refrigeration system Refrigerant: R449A / R23 R449A: approx. 8.0 kg Dedpjy H Igfsfx Adrjcn R23: approx. 2.5 kg Operating data: Operating hours: approx. 4,500 hours Sound level: approx. 67 dB(A) Environmental conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rel. humidity Scope of supply: RS-Simulators Temperature Shock System ST2K 1000 / 55 Scope of supply as shown in the pictures Functional test Refrigerant service Leakage test Condition: Used. Condition: see pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please contact us.

Condition: excellent (used), Vötsch VT 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Machine Type: Temperature Shock Test Chamber / Shock Test Chamber For sale is a used Vötsch VT 7012 S2 temperature shock test chamber with hot and cold chambers, as well as a motorized moving test platform. The system was developed for professional temperature cycling and temperature shock testing and is suitable for material testing, electronics and component testing, research and development, and quality assurance. Technical data: Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -80 °C to +70 °C Temperature deviation, time-related: ±1.0 K Temperature deviation, spatial: ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Cable gland: Ø 67 mm Load between the shelves: max. 40 kg Total load of the moving platform: max. 20 kg Dcsdpfez Ehrgsx Adron Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW Dimensions: External dimensions (W × D × H): approx. 975 × 2,115 × 1,675 mm Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Weight: approx. 1,000 kg Equipment: Hot chamber Cold chamber Motorized moving test platform Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Cable gland Ø 67 mm Water-cooled design Operator terminal Signal light Transport data: Machine (W × D × H): approx. 975 × 2,115 × 1,675 mm Weight: approx. 1,000 kg Condition: Used Optical condition according to the pictures. Scope of supply: Vötsch VT 7012 S2 temperature shock test chamber Operator terminal Original operating manual Accessories according to the pictures Availability: upon agreement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Dcedpjzhkfqjfx Adren Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Year of construction: 2018, condition: excellent (used), DYCOMETAL CRT2VT-180 Ice Water Immersion Chamber / Thermal Shock Test Chamber Manufacturer: DYCOMETAL Equipos Control Calidad, S.L. Type: CRT2VT-180 Year of manufacture: 2018 Machine type: Thermal shock test chamber / Ice water immersion chamber Djdpfjzzbwwex Adrocn Test volume / model class: approx. 180 liters For sale is a used DYCOMETAL CRT2VT-180 thermal shock test chamber with a combined hot air / water bath testing system. The system is used to perform rapid thermal shock tests. The test specimen is placed on a pneumatically movable test specimen carrier (cradle), heated in the upper hot air zone, and then immersed in the lower, temperature-controlled water bath. The rapid change between the hot air zone and the water bath subjects components, assemblies, and materials to significant thermal stress. The change can be carried out manually or via a programmed sequence; the immersion depth is adjustable. Technical data: Model: CRT2VT-180 Year of manufacture: 2018 Protection class: IP22 Temperature range: 0 °C to +200 °C Testing system: Hot air / water bath system Upper zone: Hot air testing area Lower zone: Temperature-controlled water / immersion bath Test specimen carrier: Pneumatic cradle Max. controlled travel: approx. 500 mm Operating modes: Manual / Automatic Water bath / cooling system: Temperature-controlled immersion bath Automatic water level monitoring Water inlet / water outlet Integrated water circuit with circulation pump Refrigerant: R134a / 3.4 kg GWP: 1,430 CO₂ equivalent: 4.86 t Electrical data: Mains connection: 400 V / 3N~PE / 50 Hz Connected load: 5.32 kW Current consumption: 11.51 A Control / equipment: EUROTHERM 2604 program controller Manual / automatic test operation PLC control Ethernet communication Anybus Modbus gateway Eaton easy controller EUROTHERM iTools software Pneumatic test specimen carrier / cradle Adjustable immersion depth Stainless steel interior Circulation fans Observation window / test chamber lighting Emergency stop / alarm and safety system Documentation and software as shown in the pictures Application areas: Thermal shock and ice water immersion testing Thermal cyclic stress Electronics and automotive components Sensors and control units Material and component testing Quality assurance / research and development Reliability testing Dimensions / transport data: Internal dimensions (L × W × H): approx. 650 × 650 × 450 mm External dimensions (L × W × H): approx. 1,800 × 1,250 × 2,320 mm Additional height of pneumatic lifting cylinder: approx. 1,500 mm Total height including lifting cylinder: approx. 3,820 mm Weight: approx. 810 kg Transport by freight forwarder Condition / scope of delivery: Used – Year of manufacture 2018 Optical condition as shown in the pictures. DYCOMETAL CRT2VT-180 EUROTHERM 2604 controller Software and documentation as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Vötsch VT³ 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of Construction: 2018 Machine Type: Temperature Shock Test Chamber / 2-Chamber Shock Test System Test Chamber Volume: 125 liters For sale is a used Vötsch VT³ 7012 S2 temperature shock test chamber with a 2-chamber system and programmable touch panel control. The system was developed for rapid and abrupt temperature changes and is particularly suitable for Environmental Stress Screening (ESS), environmental simulation, electronics and component testing, research and development, as well as quality assurance. The test specimen is transported between the hot and cold chambers via a vertically moving transport carriage. Technical Data: Temperature Range, Hot Chamber: +50 °C to +220 °C Temperature Range, Cold Chamber: -80 °C to +70 °C Test Chamber Volume: 125 liters Number of Chambers: 2 Max. Test Weight / Carriage Load: 50 kg Refrigeration Unit: water-cooled Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: Refrigerant 1: R449A Refrigerant Quantity: 1.70 kg GWP: 1,397 CO₂ Equivalent: 2.37 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Refrigerant 2: R23 Dedpozzazuofx Adrscn Refrigerant Quantity: 1.27 kg GWP: 14,800 CO₂ Equivalent: 18.80 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Standby Pressure: 14 bar g Dimensions: Test Chamber (W × D × H): 470 × 650 × 410 mm External Dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required Room Height for Operation: approx. 2,450 mm Equipment: 2-chamber temperature shock system Vertically moving transport carriage Programmable touch panel control CONTROLPAD for status display Observation window Test chamber lighting Cable gland Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / Remaining time display USB and Ethernet interfaces Application Areas: Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Life and stress tests Transport Data: Dimensions (L × W × H): approx. 2,350 × 970 × 1,985 mm Weight: to be determined Transport by freight forwarder Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VT³ 7012 S2 temperature shock test chamber Touch panel control Equipment and accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Here we offer you a temperature shock testing chamber. Weiss temperature shock testing chamber, air-cooled Specification: Temperature range, warm chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Changeover time, warm/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): height 450 mm, width 500 mm, depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Dcjdpfxozp D A Es Adrjn Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into three parts for transportation (bolted construction). Temperature range: -30°C to +100°C Refrigerants: 20kg R-404A + 20kg R-452A External dimensions (approx.): Width 3,920 mm, Depth 7,350 mm, Height 2,600 mm Test chamber/internal dimensions (approx.): Width 3,500 mm, Depth 5,400 mm, Height 2,110 mm Electrical data: 68kW rated power Voltage: 3x400V/PE, Current: 135A Model: KKM 40 / 45 S Further technical details will follow! For your peace of mind as a buyer, please note the following: We carry out the following procedures on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Djdozgablopfx Adrscn Condition: used Scope of delivery: see picture (Subject to changes and errors in the technical data and specifications!) For further questions, feel free to contact us by phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Dsdpfx Ajzg Txdsdrjcn Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: excellent (used), Vötsch Shock Test Chamber Here we offer you a Vötsch shock test chamber. Water-cooled Temperature range: -80°C to +220°C Warm chamber: +50 to +220 Intermediate chamber: -10 to +90 Cold chamber: -80 to +70 Supply voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Rated power: 13.5 kW Refrigerant VK: R 404A 3.00 kg p*: 25 bar Refrigerant TK: R23 15 bar p*: 25 bar Condition: used Type: VT 7012 S3 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone. Dsdpfx Aszd Uzujdrocn

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulatoren, water-cooled Climate chamber 110m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulatoren, meaning it is a climate chamber with a modular structure that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's location. This makes retrofitting (more depth or additional modules) as well as later relocation straightforward. Technical data climate chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120mm (4x left & 4x right) Windows: 1x (460 x 550mm) in the front chamber door, heated 1x (1260 x 1000mm) in the left side wall, heated Temperature range: -40°C to +120°C Dcjdozizldspfx Adrjn Time deviation: ± 0.8K – 1.5K according to DIN 50011 in an empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerants 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45L Technical Data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.H. Humidity tolerance: +/- 5.0% r.H. Dedpfx Aezg Txksdrjcn Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Year of manufacture: 2009 Technical data for solar simulation: Control module: Mitronic STB1-8 Number of lamps: 8 Ballast unit: Mitronic CP2k5 – 2ZS Ignition unit: Hönle Lamp type: OSRAM Powerstar HQI 2000W W/D/S Condition: used / second-hand Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: Dcjdpfxozp D Alo Adron External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without... approx. 1820 mm, with... approx. 1915 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Dcodpfxezp D Axe Adron Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Dcodpfxszp D Dio Adrsn Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), RS Simulators We offer a climate testing chamber here. Water-cooled 300 liters Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Type: KS 300 / 75 Weight: 630 kg Dcsdpfx Aszd R Auedrsn For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Water-Cooled Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Switching time, hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Dcsdpfxozp D A Sj Adrjn Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /18.7 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.