Used Ryko Gmbh Se1-Sa for sale (71,858)

Year of construction: 2021, condition: new, Automatic Screw Unit SE1 SA Ledouxyuopfx Akuerl With automatic screw feeding Head only bench mount,...

Condition: new, -􀂾automatic screw feed -􀂾automatic switchoff for hopper movement via trail regulation Ledpsy Aiaxofx Akusrl - automatic depth disconnection - pneumatic drive and control - pneumatic screw ejection and emergency stop - foot control - protection-frame (safety device)

Year of construction: 2018, condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Adjustable table height Adjustable table height 2 x 45° motors Lrjdpfsuxxxex Akusl Accessories: HM Saw blade 200 x 2.2 x 30mm HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Variable measuring stick 3.0m Support for measuring stops 3.0m

Condition: as good as new (ex-display), Year of construction: 2024, Hydro Pneumatic Corner Crimper EVP-350HP Hydro-pneumatic press operation Press Strength 2 x 3.500 KP at 8 Bar Press Depth 30 mm Back centring positioner with Ljdeuxx Uspfx Akuorl Pneumatic work piece clamping 3 sets standard crimping knives 3/5/7 mm Air service unit Profile support arms with Perdinax

Year of construction: 2021, condition: as good as new (ex-display), Automatic Double Screw Unit SE5 S With automatic screw feeding Lrsdpeuxyyefx Akujl Head only bench mount Automatic working operations Depth stop control,...

Year of construction: 2020, condition: as good as new (ex-display), Glazing & Control Press VK-3522 Adjustable height pneumatic 500 mm Lrsdpfxjuxy Ee Akujl Clamping height: 2.200 mm, Clamping width: 3.000 mm Pneumatic clamping press beam Clamping pads: 120 mm width L= 3.900 x W= 1.050 x H= 2.500 mm

Condition: new, cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) strips with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during Lrodpfx Akey T R Sqsujl saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! Lsdpfx Akeuud Ireuerl The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: not inspected (used), Combined shearing and bending machine, bending length 6000 mm Lrodpey Rfpfefx Akujl

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) Lrjdsxwvruspfx Akujl According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Secure your deal now: Special offer – 10% discount on all tracked dumpers! For a limited time only, take advantage of our current promotion: 10% price reduction on all tracked dumper models. The tracked dumper 500S stands for powerful material transport, precise unloading and reliable technology. With its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct unloading into containers, trailers or elevated loading areas – efficient, safe and time-saving. Thanks to its compact dimensions, high payload and robust design, the tracked dumper 500S is perfectly suited for confined construction sites, rough terrain and professional continuous use. Your benefits: ✅ Hydraulic lifting and tilting function 90° for comfortable unloading ✅ Lifting height up to 1,200 mm – ideal for containers and trailers ✅ Powerful Koop 173 diesel engine, 4.0 kW, EU Stage V ✅ High payload of 500 kg with compact external dimensions ✅ Optimal traction thanks to wide tracked chassis ✅ Stable, low-maintenance and durable construction ✅ Ideal for construction, landscaping, municipalities and agriculture Technical data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Self-weight: 550 kg Payload: 500 kg Hopper volume: 200 dm³ Hopper dimensions: 1,050 × 730 × 730 mm Lifting and Tilting Function: Maximum lifting height: up to 1,200 mm Tilting height: 1,050 mm Tilting distance: 220 mm Tilting angle: 90° Operation: hydraulic Chassis: Chassis type: Tracked chassis Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Driving Performance: Driving speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions L × W × H: 1,570 × 880 × 1,450 mm Chassis width: 700 mm Application areas: The tracked dumper 500S is impressive wherever reliability, maneuverability and lifting capacity are required: Lrjdpfx Akeyml D Heuel Construction and civil engineering Gardening and landscaping Municipal services Agriculture Material handling in confined spaces 🔥 CLEARANCE SALE: 10% DISCOUNT ON ALL TRACKED DUMPERS Take advantage of our current special offer now: 10% discount on all tracked dumper models – while supplies last! The tracked dumper 500S is immediately available and ready for use. Ideal for anyone looking for a robust, powerful and compact transport solution for professional use. Net list price: €3,800 Special price with 10% discount: €3,420 net plus VAT Location: Rheda-Wiedenbrück Inquire now and secure your price advantage! ➡️ The offer is valid for a limited time only and while stocks last.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Lsdpfeydazujx Akusrl Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Ledpfx Akjd R Dp Esujrl Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1 x Reich GmbH stainless-steel fixed table bandsaw for cutting typically used for cutting meat. Supplied with several spare parts and new blades. Lrodeyzxd Rjpfx Akujl Model - Profi 400. Serial number - 400 1141. Date of manufacture - 2005. Size of blade - 3204mm x 16mm. Electrical requirements - 400 V / 50 hz / 3 phase.

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) Ljdpfxew Ivk Tj Akujrl 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Year of construction: 2016, condition: used, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Lrsdpfxsya H Uys Akuel

Condition: new, Year of construction: 2022, functionality: fully functional, total height: 3,680 mm, operating pressure: 6 bar, final pressure: -0.6 bar, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, lifting speed: 166 mm/s, 2x Hova column-mounted slewing jib crane  2220847.03  max. load 50kg  Outreach 4m  Individual aluminum jib lengths (depending on load capacity)  Smooth-running trolleys with guide and counter-pressure rollers  Individual load capacities  Swivel range up to 270° also adjustable  Standard with HOVA chain hoist and vacuum lifter  Special solutions through in-house production  Surface-mounted aluminum column swivels  Suspended aluminum column swivels  Telescopic swivel arms  Articulated arm swivels Ledot I S Slepfx Akuorl  Mobile version for transportation by forklift or crane 2x HOVAMAT vacuum suction cups HV 50kg/90°  2220847.01  Horizontal and vertical transportation of panels of all materials  Individual load capacities with overload protection  Infinitely variable lifting speed 0-10 m/min  Operating voltage 1x230V/50Hz  Operating pressure min. 6-7 bar filtered compressed air  HOVA special handling handle for 1-hand operation with all commands for the lifting unit and vacuum lifter  Low dead weight due to compact design  Suction plate arrangement with longitudinal and cross beam depending on requirements  Can also be picked up using magnets, mechanical or pneumatic grippers  Additional safety with HOVAMAT + and permanent weight monitoring using scales. Lowering cut-off for sleeping chain, load can only be released when set down, display for weight indication possible.  Optional: energy-saving unit 2x vacuum suction cups: €6,000 each 2x column swivel: €6,500 each The sale takes place under exclusion of any warranty.

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet Ledpfx Aedz Spwokuerl - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, lifting height: 3,300 mm, mast type: duplex, gearing type: hydrostat, battery voltage: 24 V, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Lredsw Izrcepfx Akujl Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Year of construction: 2018, condition: good (used), functionality: fully functional, machine/vehicle number: H3000TM, Universal testing machine H3000TM Made in Germany Crosshead stroke: 520 mm Working area depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm / min Return speed: 500 mm / min Travel resolution: 0.01 mm We have a very large selection of clamping fixtures - screw clamping fixtures - wedge clamping fixtures - pneumatic and hydraulic clamping fixtures. Pressure plates-bending fixtures-friction fixtures and much more. Strain gauges-extensometers-long displacement transducers-clamp-on transducers-clamping chambers. Force transducers optionally 50N-100N- 200N- 500N- 1000N- 2000N- or 3000N incl. Hess software Windows 8-9-10 or 11 for universal test sequences, simple tests even without a PC and a 5KN SP 56g screw clamp with pyramid or rubber jaws 30x50 mm Factory calibration certificate with DAkkS calibrated measuring equipment. In tension and compression direction in 10 steps. The universal testing machine of the H3000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a membrane keypad. The force and travel are shown on the 2-line LCD display. The testing machine can be used as a standalone unit or with a PC via a USB interface. The displacement is measured using an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travel ranges, 500 mm or 1200 mm (with load cell without test tool). Additional scope of delivery: A load cell of your choice 50N-100N-200N-500N-1000N-2000N or 3000N, certificate 220 volt cable, USB cable, description, CE declaration of conformity. Load cell 3000N Lrodpfx Akot Rg H Aousl Measuring range:1-3000N tension and compression, with nom. 2mV/V Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, reproducibility: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate

Condition: used, Year of construction: 2016, functionality: fully functional, Shipping Line/Roller Conveyor System/Conveyor System, Conveyor Technology approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Shipping Line Condition: Used Year of Manufacture: 2016 The system consists of: 1 x Inclined Belt Conveyor approx. 3.2 meters in length 2 x Pneumatic Lifts 3 x 90° Curves 2 x Flap/Passage Elements 1 x Control Cabinet 25 height-adjustable feet and the remaining conveyor line/roller conveyor approx. 40 meters Total length: approx. 50,000 mm Total width: 750 mm Conveying width: approx. 680 mm Roller diameter: 50 mm Internal article number: 2025120101 Ledsx Ala Eopfx Akuorl Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was fully operational up to its dismantling. Thanks to the superior workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to provide a tailored offer or consult you on design or installation queries. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our excellent network of experts. We have successfully delivered projects for companies in various industries such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will develop solutions to optimize your processes and material flow efficiently and sustainably. We can also offer fully automated sorting technology and complementary components like picking shelves or containers.

Condition: used, Year of construction: 2016, functionality: fully functional, total length: 800 mm, total width: 920 mm, transport width: 680 mm, Pneumatic Lifter including Roller Conveyor/Lifter Manufacturer: RBS Förderanlagen GmbH Year of Manufacture: 2016 Condition: Used Model/Drive Type: Pneumatic Total Lifter Length: approx. 800 mm Total Width: approx. 920 mm Conveyor Width: approx. 680 mm Roller Conveyor Dimensions: Lredpfx Aexw N R Rokusl Total Length: approx. 1200 mm Total Width: approx. 750 mm Conveyor Width: approx. 680 mm Stock Quantity: 2 units Price per unit The conveyor technology was in operation until disassembly. Thanks to the excellent workmanship of the conveyor systems, your materials will glide smoothly to their destination even under heavy loads. Tailor-made solutions for your intralogistics. Whether for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customized offer or advise you on system design or installation queries. Simply let us know your requirements and onsite conditions. Benefit from our years of experience and our outstanding professional network. We have already successfully completed projects for companies in various industries, such as logistics, pharmaceuticals, handicraft, or the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or complementary components such as picking racks or containers. Features: Condition: Fully functional, with signs of wear Ideal for rapid material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) Supplier: Lager-und Fördertechnik Namoni 47800 Krefeld, Germany

Condition: good (used), We sell a used robot grinding machine. The plant is in good used condition. Lrodjh T Durspfx Akujl Included in the plant are: - 1x KUKA KR30-3 industrial robot - 3x belt grinders - 1x loading table If you have any questions, please do not hesitate to contact us!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Lsdpfx Akoxrgl Ijujrl Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps Lrodpext Dq Rjfx Akuol - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system