Used San Ou Faceplate for sale (4,815)

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck, faceplate, faceplate chuck, facing lathe chuck Kodpjt Sz Idefx Aarelt -Manufacturer: SAN OU, K72 series four-jaw faceplate chuck type D Ø 300 mm -Passage: Ø 95 mm -Bolt circle: Ø 135 mm -Mounting: Mounting: Short taper 6 / cone 103 - 106 mm short taper flange with Camlock fastening -Dimensions: Ø300 x 190 mm -Weight: 40 kg

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Kodpfx Ajyb Rpdjarolt The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1, overall weight: 4 kg, Downspout Pipe Production Line Strip thickness: 0.6 - 0.7 mm Material quality: Steel and Pre-painted Product diameter: Ø 100 mm ( 75, 87, 111,120 mm optional dimention) Production Line included: Double Head Decoiler: 4+4 tons, Roll Forming Machine casstte type ( with extra cassettes ) Hydraulic Cutting Unit. Kledewvhnhspfx Aarst

Condition: used, mileage: 51,158 km, power: 96 kW (130.52 HP), first registration: 05/2021, fuel type: diesel, tire size: 225/65R16C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, Year of construction: 2021, Equipment: ABS, central locking, cruise control, power mirror, = Additional options and equipment = - Spare key - Speed limiter - Rearview camera - Alternating current = Additional information = Tyre size: 225/65R16C Brakes: Disc brakes Suspension: Leaf suspension Front axle: Steered; Tyre tread left: 9 mm; Tyre tread right: 9 mm Kledpfx Aey Il Uisarot Rear axle: Tyre tread left: 7 mm; Tyre tread right: 7 mm Unladen weight: 2,049 kg Payload: 1,251 kg Gross vehicle weight: 3,300 kg Damage: none

Condition: used, mileage: 200,000 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x4, wheelbase: 3,200 mm, overall weight: 3,010 kg, empty load weight: 2,138 kg, maximum load weight: 1,175 kg, first registration: 06/2016, loading space length: 1,511 mm, loading space width: 1,560 mm, loading space height: 457 mm, fuel consumption (urban): 10.7 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 8.5 l/100km, CO₂ emissions: 224 g/km, emission class: euro5, color: black, driver cabin: other, suspension: other, number of seats: 2, total length: 5,396 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, soot filter, traction control, trailer coupling, CAR PARADISE in Berlin Frank-Zappa-Str. 9A Mon-Fri 9:00-17:00 Sat 10:00-13:00 Tel: Mobile/WhatsApp: VEHICLE FINANCING & TRADE-IN POSSIBLE NISSAN NAVARA 2.3dci 4x4 Doka automatic 2-seats truck registration * Navigation system, * Automatic air conditioning, * ABS , ESP, central locking with remote control 2x keys, * CD radio, * on-board computer * tow bar up to max. 3,500kg, * Doka 2-seats, truck registration, * center armrest, * driving lock, * seat heating * outside mirror, parking brake * vehicle from 1st owner * Cruise control * Multifunction steering wheel Please arrange a test drive by phone Subject to prior sale and errors Kodpfx Aaew A Ai Hsrolt Call us!! We speak English. Financing, Trade-in, you can find further offers on our homepage The information provided in advertisements, on the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed properties. The seller also assumes no liability for typing, spelling and data transmission errors. The equipment listed may need to be checked separately. Please understand that, although the technical and visual condition of this vehicle is good, we prefer to sell it to businesses or for export due to its age and mileage, with the exclusion of any warranty. Thank you very much! The vehicle description is only for general identification of the vehicle and does not constitute a guarantee in the sense of sales law. The information does not claim to be complete and is not considered a guaranteed property in the sense of Section 434 BGB Paragraph 1 Sentence 3. Errors and prior sale remain reserved.

Condition: good (used), Year of construction: 2000, operating hours: 2,790 h, load capacity: 1,500 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,200 mm, Nissan FD01A15 duplo330 sideshift / 4th function DIESEL FULL CAB. LOW HOURS. Video available via Whatsapp. Ongoing stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a fluctuating inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Klodpjycgr Dsfx Aarot

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Kljdpfx Aspcibmjarjt

Condition: used, mileage: 235,000 km, power: 126 kW (171.31 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2008, emission class: euro4, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, had accident, immobilizer system, * Nissan Navara Pick Up Double King Cab XE 4x4 – Passenger Car Registration – * 2.5 l Diesel – Displacement: 2,488 cc – 126 kW / 176 hp – Euro 4 – Green Emissions Sticker – * ATTENTION: VEHICLE HAS A TRANSMISSION ISSUE – WHEN WARM, 4TH AND 5TH GEAR MAY OCCASIONALLY JUMP OUT – CAUSE UNKNOWN – VEHICLE IS DRIVABLE – SOLD AS IS, IN CURRENT CONDITION – * VIN: VSKCVND40U0329130 – German vehicle – German registration document – * Tow bar with 2,600 kg braked towing capacity – 750 kg unbraked – * Vehicle available immediately – Preferred sale to trade / export / commercial operators * Viewing by appointment only – * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not constitute warranted characteristics. * The seller assumes no liability for typographical or data transmission errors. Klodjxgldrjpfx Aarjt * Subject to prior sale, changes, and errors. Special Equipment: Metallic paint, Topline package Additional Equipment: Driver and passenger airbags, active front head restraints, steering wheel audio/radio controls, automatic headlight activation, electrically adjustable and heated exterior mirrors, exterior mirrors with ground lighting, exterior mirrors with chrome trim, outside temperature display, integrated indicators in exterior mirrors, Bluetooth interface, Nissan Brake Assist system, 6-disc CD changer, roof rack, limited-slip differential, aluminum entry sills, electronic brakeforce distribution (EBD), electric front and rear windows, side protection, Bluetooth hands-free kit, front footwell lighting, center console cup holders, seatbelt pretensioners, leather handbrake lever, heated rear window, auto-dimming interior mirror, ISOFIX child seat mounts, body/cabin: double cab, body: pick-up, 2-zone automatic climate control, Comfort package, chrome front grille, lumbar support driver’s seat, height-adjustable steering column, alloy wheels, engine 2.5 l – 126 kW dCi Diesel CAT, radio preparation, 6 speakers, wheelbase 3,200 mm, full-size spare wheel, split/folding rear seat, leather gearshift/selector lever, height-adjustable front seatbelts, height-adjustable driver’s seat, sun visors with mirrors, 12V socket in center console, chrome rear bumper, partially body-colored bumpers, side steps, interior chrome door handles, tinted windows, dark-tinted rear windows, UV-protection glazing.

Year of construction: 2021, condition: new, Selling price: € 525, US$ 554,6 Kljdpfx Aaon Tm S Aorst We supply high quality mini excavator quick couplers for all brand-models We can find very cheap shipping quotes, for detailed information please contact us

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser source manufacturer: Max Photonics, laser source model: Max Photonics 6kW mit CE, laser power: 6,000 W, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 240 mm, pipe length (max.): 6,050 mm, working length: 8,050 mm, working width: 250 mm, working height: 250 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 280 mm, feed rate X-axis: 116 m/min, feed rate Y-axis: 131 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 100 kg, power: 6,000 kW (8,157.72 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 5,000 kg, total length: 12,500 mm, total width: 2,400 mm, total height: 2,550 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, With a fully redesigned machine concept, it unites maximum stability, highest efficiency, precise processing, and intelligent automation in one system. This makes it optimally suited for processing a wide variety of metal tubes and profiles – flexible, reliable, and powerful. A patented, innovative design combined with an exclusive automatic loading and unloading system significantly boosts productivity. The system operates faster, more stably, and more intelligently, and is available in different configurations to suit your individual requirements. Thanks to enhanced dynamics and increased performance, the machine delivers outstanding results across all processing operations – whether cutting, drilling, or complex contour cutting. The cutting quality is of the highest standard: smooth surfaces, minimal thermal impact, and virtually no residue or rework required. Numerous patented core technologies ensure consistently high processing accuracy and perfect results – even in demanding continuous operation. Even after many years of intensive use, the system’s performance remains at an exceptionally high level. This makes your investment a sustainable, future-proof solution for your production. Cutting power: 6000W Kjdpfx Ajy R I R Eearolt Laser source: MAX Photonics Laser head: BOCI Autofocus Max. tube length: 6500mm Tube diameter: 240mm Acceleration: 1.2G

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser source manufacturer: Max Photonics, laser source model: Max Photonics 3kW mit CE, laser power: 3,000 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, pipe diameter (max.): 240 mm, pipe length (max.): 6,050 mm, working length: 8,050 mm, working width: 250 mm, working height: 250 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 280 mm, feed rate X-axis: 116 m/min, feed rate Y-axis: 131 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 100 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 5,000 kg, total length: 12,500 mm, total width: 2,400 mm, total height: 2,550 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, With a completely redesigned machine concept, it combines maximum stability, highest efficiency, precise processing, and intelligent automation in a single system. It is optimally suited for processing a wide range of metal tubes and profiles—flexible, reliable, and powerful. A patented, innovative design combined with an exclusive automatic loading and unloading system ensures a significant increase in productivity. The system operates faster, more stably, and more intelligently and is available in various configurations to precisely match your individual requirements. Thanks to improved dynamics and increased performance, the machine delivers outstanding results across all processing operations—whether cutting, drilling, or complex contour cutting. The cutting quality is of the highest standard: smooth surfaces, minimal thermal impact, and virtually no residues or reworking required. Numerous patented core technologies guarantee consistently high machining accuracy and perfect results—even during demanding continuous operation. Even after many years of intensive use, the system’s performance remains at an exceptionally high level, making it a sustainable, future-proof investment for your production. Kedpfx Aaey R I Rxsrslt Cutting power: 3000 W Laser source: MAX Photonics Laser head: BOCI Autofocus Maximum tube length: 6500 mm Tube diameter: 240 mm Acceleration: 1.2G

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6kW mit CE, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 8,500 kg, total length: 10,500 mm, total width: 4,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 4020, 6 kW – Overview Safety & Protection Fully enclosed metal safety enclosure with radiation-proof doors and windows. Environmentally friendly and operator-safe. Work Platform High and low parallel platform: Front end: Laser cutting area. Rear end: Loading and unloading area. No mutual interference → increased work efficiency. Machine Structure 10 kW bed structure: Time-segmented, sectional dust extraction. Effective heat dissipation, resistant to thermal deformation. Industrial auxiliary equipment: air conditioner, dedicated cooling system, constant temperature & humidity → stable performance & extended service life. Precision Guarantee: Bed processed with large gantry milling machine. Industrial-grade linear guides, racks, and ball screws. Full servo control, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers. Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software suite: Industry-standard, secure, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core Components Laser cutting head: BOCI BLT442 Laser source: MAX 6 kW, CE certified Water chiller: HANLI 12 kW Linear guide: TAIWAN DTX 30+20+20 Rack: TAIWAN JT Reducer: Germany Techmach Cameras: 2 units Servo motor: BOCHU Proportional valve: Felton Electronic components: SCHNEIDER Triple air inlet: nitrogen, oxygen, air Kodpfxoy R I N Ie Aarelt Lubrication system: Automatic oil supply system Accessories 30 protection lenses, 30 nozzles, toolbox. Optional: Air compressor ARS-30HP-XF-1, 1.6 MPA, dust collector 7.5 kW.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 12kW mit CE, laser power: 12,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 8,500 kg, total length: 10,500 mm, total width: 4,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser cutting machine 4020, 12 kW – Overview Safety & Protection Fully enclosed metal safety cabin with radiation-protected doors and windows. Environmentally friendly and safe for operators. Working Platform Up/down parallel working platform: Front end: Laser cutting. Rear end: Loading and unloading. No mutual interference → increased work efficiency. Machine Structure 10 kW bed structure: Time-segmented, zoned dust extraction. Robust heat dissipation, resistant to thermal influences. Industrial auxiliary equipment: Air conditioning, specialized cooling system, constant temperature & humidity → stable performance & longer service life. Precision Guarantee: Kledpey R I Nnsfx Aarot Bed processed by large gantry milling machine. Industrial-grade guide rails, rack and pinion, and screw drives. Full servo control, double-sided dual drive. High industrial standard and precision. German assembly technology: Precision calibration with laser interferometers. Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Market-standard, safe, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core Components Laser cutting head: BOCI BLT442 Laser source: MAX 12 kW, CE-certified Water chiller: HANLI 12 kW Guide rails: TAIWAN DTX 30+20+20 Machine frame: TAIWAN JT Reducer: Germany Techmach Cameras: 2 pieces Servo motor: BOCHU Proportional valve: Felton Electrical components: SCHNEIDER Triple air inlet: Nitrogen, Oxygen, Air Lubrication system: Automatic oil supply system Accessories 30 protective lenses, 30 nozzles, toolbox. Optional: Air compressor ARS-30HP-XF-1.6 MPA, dust collector 7.5 kW.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6 kW mit CE, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 8,000 kg, total length: 8,500 mm, total width: 3,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 1530, 12 kW – Overview Safety & Protection Fully enclosed metal protective chamber with radiation-resistant doors and windows. Environmentally friendly and safe for operators. Work Platform High- and low-positioned parallel platform: Front end: laser cutting. Rear end: loading and unloading. No mutual interference → increased work efficiency. Machine Structure 10 kW bed structure: Time-segmented, zoned dust extraction. Superior heat dissipation, resistant to thermal effects. Industrial auxiliary equipment: air conditioning, special cooling system, constant temperature & humidity → stable performance & longer service life. Precision Assurance: Bed processed by large gantry milling machine. Industrial-grade guide rails, racks, ball screws. Full servo drive, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software suite: Market-proven, safe, and user-friendly software. Kledpfoy R I Nhex Aarot Supports smart networking. Professional nesting software: CypNest (included). Core Components Laser cutting head BOCI BLT442 Laser source MAX 6 kW, CE certified Water chiller HANLI 6 kW Guideway TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Cameras (2 pcs) Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlet: nitrogen, oxygen, air Lubrication system: automatic oil supply system Accessories 30 protective lenses, 30 nozzles, toolbox. Optional: air compressor ARS-30HP-XF-1,6 MPA, dust collector 7.5 kW.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 12kW mit CE, laser power: 12,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 8,000 kg, total length: 8,500 mm, total width: 3,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 1530, 12 kW – Overview Safety & Protection Fully enclosed metal safety housing with radiation-shielded doors and windows. Kledpfx Ajy R I Nboarst Environmentally friendly and safe for operators. Working Platform High-low parallel platform: Front end: Laser cutting. Rear end: Loading and unloading. No mutual interference → increased work efficiency. Machine Structure 10 kW bed structure: Segmented dust extraction with time-division control. Enhanced heat dissipation, resistant to thermal effects. Industrial auxiliary equipment: air conditioner, special cooling system, constant temperature & humidity → stable performance & longer service life. Precision Guarantee: Bed machined by large gantry milling machine. Industrial-grade guide rails, gears, and ball screws. Fully servo-controlled, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Market-standard, safe, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core Components Laser cutting head BOCI BLT442 Laser source MAX 12 kW, CE certified Chiller HANLI 12 kW Guide rails TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Camera (2 units) Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlets: nitrogen, oxygen, air Lubrication system: automatic oil supply Accessories 30 protective lenses, 30 nozzles, tool kit. Optional: ARS-30HP-XF-1,6 MPA air compressor, 7.5 kW dust collector.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 752 mm, total length: 890 mm, total width: 606 mm, Tested forklift battery for your truck – 48V 5PZS 500Ah – special battery tray + 1 year warranty + incl. aquamatic system + incl. end discharge cable & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 890 mm Width 606 mm Height 752 mm Weight: approx. 930 kg Suitable for the following models and others: Still RX 20-15 Still RX 20-20 Still RX 20-20 P Toyota 5FBE15 Bendi B40/48E-180D Caterpillar EP16N Doosan B20X-5 Hyundai 18BT-9 JAC CPD25 Manitou ME 318 Mitsubishi FB16KT Nichiyu FBT80 Kljdpfxoy Rnmye Aarot Common battery sizes available, feel free to inquire. Transport possible.

Condition: as good as new (ex-display), functionality: fully functional, mileage: 4,500 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,100 mm, overall weight: 3,500 kg, empty load weight: 2,440 kg, first registration: 07/2022, loading space length: 4,800 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: steel, number of seats: 3, Year of construction: 2022, fuel: diesel, Equipment: ABS, air conditioning, cable winch, cruise control, hydraulics, onboard computer, trailer coupling, Sliding platform COULISSALU 3.5 Hydraulic Aluminium platform 4990x2060 remote control for platform and winch Slide for winch Hydraulic Winch BULL 3500 -steel CABLE Towhook High flyer Platform in high-quality extruded aluminum section 4990x2060 Profiled railings with 12 lashing points Electric tray control box with integrated fuses Manual winch and ball translation on platform 2 galvanized wheel chocks Kodpfxsy Du Rre Aarelt Tow hitch and towing ball with cranked ball joint and 12V 7-pin socket GRAND ARCEAU - Flyer-type rollbar BULL 3500 hydraulic winch Radio control of platform and winch

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13607, San Cassiano SE250, Spiral mixer, Removable bowl spiral mixer, 250-280Kg capacity bowls, FIVE bowls. Kjdoy Ef Svepfx Aarolt

Condition: used, Year of construction: 1990, Max pressure: 28 Bar Flow: 120 m³/h Suction dimension: 20 cm Discharge dimension: 20 cm Used for: Oil, Flammable Liquid Dimensions (LxWxH): 4 x 1.3 x 1.65 m Kedpfx Aaoywi Ixsrelt Approx. weight: 3,800 kg Operating hours: 76 since new

Year of construction: 2000, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,200 mm, spindle motor power: 27,000 W, spindle speed (max.): 3,000 rpm, number of axes: 3, This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine. • Table size: 1,300 x 1,100 mm • W-axis travel (boring head): 600 mm • B-axis rotation (rotary table): Continuous • Spindle orientation: Horizontal Kedpfoyguz Uox Aarslt • Tool magazine: 30 positions Technical Specification Taper Size ISO 50

Condition: good (used), La San Marco NEW 105 MULTIBOILER 2G portafilter machine New price 8.800 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each group. The temperature is set in a simple and intuitive way on the keypad of each group. The boiler for steam and hot water has an electronic automatic temperature setting that can be easily adjusted from the touch screen keypad. The innovative keypad with touch screen technology is complemented by a graphic RGB display. Setup and program guidance is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LEDs makes the machine even more ergonomic with an eye to aesthetics. Groups: 2 Power: 5,3 kW Klsdpfxjk Sgt Tj Aarst Steam lance: 2 Boiler: 10 L + 2 x 0,45 L Operation: Touch Display Multiboiler: Yes Power 230V: Yes Hot water: Programmable Power 400V: No Size LxDxH : 790 x 535 x 515 mm Shape: Traditional Barista Lights: Yes Item condition: defective, for spare parts or for hobbyists More SM NEW 105 models - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), La San Marco NEW 105 MULTIBOILER 2G coffee maker New price 8.800 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. The Multiboiler technology allows precise temperature control for each boiler of each group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature setting that can be easily adjusted via the touchscreen keypad. The innovative keypad with touch screen technology is complemented by a graphic RGB display. Set-up and programme guidance is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. Workstation lighting with customisable multicolour LEDs makes the machine even more ergonomic with an eye to aesthetics. Groups: 2 Power: 5.3 kW Steam lance: 2 Boiler: 10 L + 2 x 0,45 L Operation: Touch Display Multiboiler: Yes Power 230V: Yes Hot water: Programmable Power 380V: No Size LxDxH : 790 x 535 x 515 mm Kedpfokyt Nrox Aarelt Shape: Traditional Barista Lights: Yes Item condition: defective, for spare parts or for hobbyists You can find more SM NEW 105 models - new and used - in our shop! International shipping costs on request!

Condition: good (used), La San Marco NEW 105 MULTIBOILER 2G portafilter machine New price 8.800 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each group. The temperature is set in a simple and intuitive way on the keypad of each group. The boiler for steam and hot water has an electronic automatic temperature setting that can be easily adjusted from the touch screen keypad. The innovative keypad with touch screen technology is complemented by a graphic RGB display. Setup and program guidance is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LEDs makes the machine even more ergonomic with an eye to aesthetics. Groups: 2 Power: 5,3 kW Steam lance: 2 Ksdpek Sgttjfx Aarolt Boiler: 10 L + 2 x 0,45 L Operation: Touch Display Multiboiler: Yes Power 230V: No Hot water: Programmable Power 400V: Yes Size LxDxH : 790 x 535 x 515 mm Shape: Traditional Barista Lights: Yes Item condition: defective, for spare parts or for hobbyists More SM NEW 105 models - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Kjdeh Uyg Nspfx Aarelt

Condition: like new (used), functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MAX 12kW mit CE, laser power: 12,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, power: 12,000 kW (16,315.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 8,000 kg, total length: 8,500 mm, total width: 3,500 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 1530, 12 kW – Overview Safety & Protection Fully enclosed metal safety cabin with radiation-protected doors and windows. Environmentally friendly and safe for operators. Work Platform Parallel platform design with upper and lower levels: Front section: Laser cutting. Rear section: Loading and unloading. No interference between operations → increased work efficiency. Machine Structure 10 kW bed design: Segmented, time-controlled dust extraction. Excellent heat dissipation, thermal resistance. Industrial auxiliary equipment: Air conditioner, special cooling system, constant temperature & humidity → stable performance & extended service life. Precision Guarantee: Bed processed with a large gantry milling machine. Industrial linear guides, gears, and screw drives. Full servo control, dual-sided double drive. High industrial quality and precision. German assembly techniques: Precision laser interferometer calibration Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Industry-standard, safe, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core Components Kledpfx Aasycfuwerst Laser cutting head: BOCI BLT442 Laser source: MAX 12 kW, CE certified Water chiller: HANLI 12 kW Linear guides: TAIWAN DTX 30+20+20 Frame: TAIWAN JT Reducer: Germany Techmach Cameras: 2 units Servo motor: BOCHU Proportional valve: Felton Electronic components: SCHNEIDER Triple air inlets: nitrogen, oxygen, air Lubrication system: Automatic oil supply system Accessories 30 protective lenses, 30 nozzles, toolbox. Optional: ARS-30HP-XF-1.6 MPA air compressor, 7.5 kW dust collector.