Used Saris K1 256 150 1500 1 Heckkipper for sale (83,729)

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, maximum load weight: 1,062 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 1500 1, Single-axle tipper trailer NEW VEHICLE Internal dimensions: 256cm x 150cm Sideboard height: 30cm Bed height: 67cm Total weight: 1500kg Payload: 1059kg Braked single-axle trailer Overrun brake and parking brake by AL-KO 1500kg axle with brake and cooling fins Ljdpfx Aisghpbnoqjhl Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on plywood floor Automatic jockey wheel with 400kg support load 6 noise-reducing tie-down points with 800kg tensile force Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Large tipping angle of 41 degrees backwards Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on a tilted vehicle -Folding crank for rear supports -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension sideboards 30cm with tension lock -Flat cover with or without bows -High cover 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration document 200 € net Pictures are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, also for caravans. In addition, we have a large range of spare parts and accessories, also for trailers from various manufacturers. Visit us online or come by directly!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 462 kg, maximum load weight: 1,038 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 150 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 150 1500 1 Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading height: 67cm Gross weight: 1500kg Payload: 1059kg Braked single-axle trailer Overrun brake and handbrake by AL-KO 1500kg axle with brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile side walls with tension locks Sides folding and removable on all sides 15mm thick, anti-slip and robust phenolic plywood flooring Additional steel plate on wooden floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile strength Reinforced 13" C-grade tyres with steel valve M+S tires Net/rope hooks on frame 13-pin plug LED marker lights at the front Rear lights with reversing light, rear fog and triangular reflectors Upper frame mounted on rubber bushings Large tipping angle of 41 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -100km/h equipment (shock absorbers) -Spare wheel with holder -Without side walls (discounted price) -Increased side wall height to 35cm -Black Edition (black powder-coated side walls and rims) -Ramp rails -U-profile for attaching the original SARIS ramp rail -Electric tipping control -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric control -Safety prop for maintenance work on tilted vehicle -Complete LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Mesh side extensions in various heights, also closed -Additional 30cm side walls with tension lock -Flat cover with or without bars -High cover 160cm or 180cm Lhedpferk Iybjx Aiqel Further accessories available on request! Plus freight to Gera and vehicle registration documents: €200 net Images are for illustrative purposes only and may show accessories at extra cost. Have you not yet found the right trailer? We permanently have 50–100 units in stock, ready for immediate collection. Workshop open weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers. Additionally, we have a wide range of spare parts and accessories for trailers from all manufacturers. Get expert advice by phone, visit our website or drop by in person.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Lhjdpfezlb D Sex Aiqol Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm Ljdpfxoyupd He Aiqjhl - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-11, empty load weight: 546 kg, maximum load weight: 2,166 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2700 2, Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 150cm Side board height: 30cm Loading area height: 67cm Total weight: 2700kg Payload: 2154kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT 2x 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C-tyre with steel valve M+S tyres Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber bearings Large tipping angle of 48 degrees backwards Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Side board height increased to 35cm -Black Edition (Powder-coated side boards and rims in black) -Ramps -U-profile for attaching the original SARIS ramp -Electric tipping control -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side boards 30cm with tensioning latch -Flat cover with or without rail -High cover 160cm or 180cm Further accessories on request! Plus freight to Gera and vehicle registration document €200 net Images are for illustrative purposes only and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, also for caravans. Lhedpfx Ajghpclsiqjl Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 326 kg, maximum load weight: 1,174 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 1500 1 NEW VEHICLE Internal dimensions: 256 cm x 150 cm Side wall height: 30 cm Loading surface height: 66 cm Gross vehicle weight: 1500 kg Payload: 1182 kg Braked single-axle high loader Overrun brake and handbrake by KNOTT Axle with large brakes and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tension latches Drop-down and removable on all sides 15 mm thick, non-slip, durable phenolic plywood floor Automatic jockey wheel rated for 400 kg support load 8 noise-reducing lashing eyes with 800 kg tensile strength Reinforced 13" C-rated tires with steel valves M+S (Mud & Snow) tires Net/rope hooks on the frame 13-pin plug LED front marker lights Rear lamps with reversing light, fog light (NSL), and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026: - Equipment for 100 km/h approval (shock absorbers) - Spare wheel with holder - Without sideboards (discount) - Side wall extension to 35 cm - Black Edition (powder-coated sideboards and rims in black) - Loading ramps - Steel plate on floor panel - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Mesh sides in various heights, also enclosed - 30 cm extension side walls with tension latches - Flat tarpaulin with or without bows - High tarpaulin 160 cm or 180 cm More accessories available on request! Plus shipping to Gera and vehicle registration document: €200 net Lhsdpfx Aiork Ir Ujqol Images are exemplary and may show optional equipment subject to surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate pickup. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Specialist for axle repairs, including for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh (Note: unclear reference, not translated) We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by in person.

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h Lsdpfx Aoyga Utsiqjhl • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: good (used), Year of construction: 2006, 1 used abrasive blasting system Lhedjzyx Siepfx Aiqsl Manufacturer: GLÄSNER Type: DSK 1500 W Year of manufacture: 2006 Factory number: 5162-003 Technical data Working area: 1,400 × 1,150 × 900 mm Max. operating pressure: 6 bar Drive power: 2.2 kW Process: Abrasive blasting Abrasive blasting tank: included Turntable: included Lighting: included Dust extraction and filtration unit Compressed air treatment Viewing window / gloves: included CE The system was used exclusively for blasting stainless steel and is in very good condition.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t Lsdez Aalvspfx Aiqohl - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-10, empty load weight: 535 kg, maximum load weight: 1,465 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2000 2 Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 150cm Side board height: 30cm Loading platform height: 66cm Total weight: 2000kg Payload: 1465kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT 2 axles with 1350kg brake Low chassis Lhsdpfxoghpcpj Aiqsl Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 48 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Side board height increased to 35cm -Black Edition (Powder-coated side boards and rims in black) -Ramps -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on a tipped vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side boards 30cm with tensioning closure -Flat sheet with or without frame -High sheet 160cm or 180cm Further accessories available on request! Plus freight to Gera and vehicle registration document 200 € net Images are for illustrative purposes only and may show optional accessories that incur additional costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Visit us online or come directly!

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Ledpfx Aisz Aarcjqohl Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-15, empty load weight: 449 kg, maximum load weight: 901 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,340 mm, loading space height: 1,500 mm, loading space volume: 5 m³, suspension: other, tire size: 185 R 14 C, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS GO 256 134 150 1350 1 Box trailer NEW VEHICLE Internal dimensions: 256cm x 134cm Internal height: 150cm Loading platform height: 54cm Total weight: 1350Kg Payload: 901Kg Braked single-axle low loader Overrun brake and parking brake by AL-KO 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm screen-printed plywood walls and roof Interior: Gray Exterior: White GRP coating Optimal base for wrapping or lettering Rear double doors made of screen-printed plywood with locking mechanism Water drain above the double doors 15mm thick, non-slip, and robust screen-printed plywood floor Lhodpfx Aisghpb Seqjl Bow jockey wheel Lashing rail (airline) with 600Kg pulling force integrated into the floor 4 adjustable lashing points for airline rail LED interior light 14" reinforced C tires M+S tires 13-pin connector Side marker lights in front Rear lights with reversing light and triangular reflectors 2x U-shaped chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 - Modification of the internal height to 138cm or 180cm - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Ramps - Side door on the left or right, 72cm - Ramp instead of double doors, 750Kg incl. lifting aid - SARIS aluminum wheels - Complete LED lighting - Anti-theft device - Anchor rail with locking bar - Rear supports Further accessories available upon request! Plus freight to Gera and vehicle registration certificate 250 € net. Pictures are for illustrative purposes and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 319 kg, maximum load weight: 1,031 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 1350 1 NEW VEHICLE Internal dimensions: 256cm x 150cm Side panel height: 30cm Loading platform height: 66cm Total weight: 1350Kg Payload: 1031Kg Braked single-axle trailer Overrun brake and parking brake by KNOTT Axle with large brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Automatic jockey wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (powder-coated side panels and rims in black) -Ramps -Steel plate on the base plate -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh Lhjdpfszb Nc Ajx Aiqol -H-frame -Leaf guard in various heights, also closed -Extension side panels 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle registration document 200 € net. Images are for illustrative purposes and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to our premises.

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Ljdpezy I Hvsfx Aiqohl Price: Upon request

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Lhjdpfx Aswqqwboiqel

Condition: new, machine/vehicle number: NEW-7, empty load weight: 326 kg, maximum load weight: 1,174 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 276 150 1500 1 Internal dimensions: 276cm x 150cm Side board height: 30cm Loading platform height: 66cm Total weight: 1500Kg Payload: 1174Kg Braked single-axle trailer Overrun brake and handbrake by AL-KO Large 1500Kg brake with cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed plywood floor Automatic support wheel with 400Kg support load 8 noise-reducing tie-down points with 800Kg tensile force Reinforced 13" C tire with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflector Ljdpfxeghpczs Aiqshl Optional accessories: -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Steel plate on the floor -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension sideboards 30cm with tensioning latch -Flat cover with or without rails -High cover 160cm or 180cm More accessories available on request! Plus freight to Gera and vehicle registration document 200 € net Images are for illustration purposes only and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. Wide range of trailer rentals. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5290, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Lhsdjz Aawxepfx Aiqsl Technical data: - Year of construction: 2020 - Serial number: 5290 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Year of construction: 2005, condition: used, Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible. Ledpfx Aijzybvqjqehl

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143984 Serial number: 143984 The KUKA KRC4 linear axis is a high-quality axis that is ideal for industrial applications. It offers precise motion control and is particularly important for automation processes and robotic systems in manufacturing. Lsdpfx Asvzr Svoiqehl With its robust design, it guarantees reliable performance in demanding applications.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Lodpfx Asz Aaw Seiqehl - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: excellent (used), Year of construction: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 11.2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Size of the mounting platens: 695x695 mm Ejector: electric Clamping unit: toggle Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed mounting platen Air valve x 3 on the side of the moving mounting platen Hydraulic core pull x 1 on the side of the fixed mounting platen Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Ljdpfszy I Imsx Aiqjhl Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2006, Arburg 470C 1500-400 with robot Wittmann W721 Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm injection weight: 184 g Injection pressure: 2000 bar Metering volume: 201 ccm Clamping unit: clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 650x650 mm Lodpfxezy I Hps Aiqjhl ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of manufacture: 2006 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions: Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 470C 1500-400 with the Wittmann W711 robot Year of construction: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Ljdpfx Ajzy I H Ajiqjhl Clamping unit: Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Robot Wittmann W711 Year of construction: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 9.7 kW Total output: 28.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: new, functionality: fully functional, machine/vehicle number: NEW-11, empty load weight: 579 kg, maximum load weight: 2,121 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2700 2, Rear tipper, electric operation NEW VEHICLE Internal dimensions: 276cm x 150cm Side panel height: 30cm Loading platform height: 67cm Total weight: 2700Kg Payload: 2121Kg Braked tandem axle trailer Overrun brake and handbrake from KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Additional steel plate on the plywood floor Automatic jockey wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 Lhsdpfx Aezu Sa Neiqel -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Ramps -U-profile for attaching the original SARIS ramp -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without bows -High cover 160cm or 180cm Further accessories on request! Plus freight to Gera and vehicle registration document 200 € net Pictures are examples and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Specialist for axle repairs, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Ledpjz D Utbefx Aiqjhl Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz