Used Sauerburger Carat 2500 for sale (4,073)

Condition: used, Year of construction: 2023, 1,385 kg Working shaftVario with width S / PTO speed 1000 rpm PTO shaft W 2400 / both sides 1 3/8 inch Z6 length 1810 ( 31 / hydraulic embankment mulcher / linear lateral adjustment - hydraulic cylinder adjustment / hydraulic height adjustment of mulching head Pgjdstvgtxspfx Ai Tsu

Condition: used, Year of construction: 2005, Sauerburger rear-mounted PEGASUS 6300 and front-mounted mulcher WM 3000 in combination. Pgsdpfx Ais Aghy Rs Teu

Condition: like new (used), Year of construction: 2010, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, overall weight: 16,000 kg, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, input voltage: 50 V, number of spindles: 10, Equipment: motor brake, Description Weinig Powermat 2500 10 spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Podpfx Aoz S U Upoi Tegu Feed rate: 37 kW / 12-120 m/min, Spindle arrangement: 1 - Bottom (22 kW) - with hydro clamping and fully automatic straight-edge jointer 2 - Right (11 kW) 3 - Left (11 kW) 4 - Top (37 kW) - with fully automatic straight-edge jointer 5 - Bottom (18.5 kW) with hydro clamping and fully automatic straight-edge jointer 6 - Top (18.5 kW) - with hydro clamping and fully automatic straight-edge jointer 7 - Top (53 kW) - with hydro clamping, speed 3000-6000 RPM 8 - Bottom (53 kW) - with hydro clamping, speed 3000-6000 RPM 9 - Top (53 kW) - with hydro clamping, speed 3000-6000 RPM 10 - Bottom (53 kW) - with hydro clamping, speed 3000-6000 RPM Short infeed table, 1.3 meters (4 rollers) with 2 powered rollers above the table, and 2 powered rollers in the table. Both table rollers are adjustable in height. Table height adjustment with electronic digital display. Incl. 2 heavy-duty side pressure rollers, diameter 140 mm, pneumatic. Hobyox Svm Rob Etv Ijnu Support legs, height 320 mm for table height 1190 mm Marathon P O W E R Coating for machine table, fences, and guide rails (excluding infeed table and special table tops). Special coating to protect table tops, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, particle board, plastics, metals). Automatic lubricant pump for table lubrication. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above with diameter 120 mm. In the area of the right and left spindle.

Condition: used, Year of construction: 2007, Sauerburger Mulcher HP 2600 (Int. No. 17654) Sauerburger Mulcher HP 2600 Year of manufacture: 2007 Y-shaped blades (corn/grass blades), NEW 3 rows of corn Offset, so you don’t drive on the corn rows Adjustable rotor, oscillating, 6.00m - 9.0m PTO shaft 540 rpm Freewheel in the gearbox Oscillating top link, therefore only slight lifting at the front when turning Easy operation due to the Y-shaped blades Sold on behalf of a customer Pgjdpfxo Af Tfgo Ai Tju Tires: Vredestein 600-9 V54 Financing available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly assist you with financing options both domestically and internationally. There is also the possibility of trading in other machines.

Condition: used, Year of construction: 2016, Sauerburger mulcher Draco 1800 (Internal No.: 14489) Rotary mulcher with pivoting disc Ideal for orchards and photovoltaic systems Main rotor with two oscillating blades made of special steel with 50 mm overlap Pedpfx Aj Af Tc Noi Tsgu Fixed blade with protective disc, pivoting range mechanically adjustable, tensioning device with display of the correct V-belt tension, Transport width 1.8 m Working width 1.8-2.25 m Max. offset from tractor center 2.00 m, travel distance 660 mm Length 1.3 m 168.3 Q in MM running roller, Number of main rotors / blades 3/6, pivoting disc 500 mm 515 kg Optional: PTO shaft with freewheel 350.00 EUR plus VAT, hydraulic retraction of the pivoting disc 390.00 EUR plus VAT, Domestic freight cost share 250.00 EUR plus VAT, hydraulic control of the pivoting disc adjustable via flow dividers 1,900.00 EUR plus VAT. Financing options starting from 2% are available for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. It is possible to trade in other machines.

Condition: used, Year of construction: 2024, Sauerburger Tango 1600 (Int. 11710) Year of manufacture 2024, Pgedpfx Ae Af Tdboi Tsu with idler roller, front and rear flail mower freewheel integrated in the gearbox, three-point linkage Cat I, with grinding skids, working width 1.58 m, Vario working shaft with wide flails, deflector plate, hydraulically adjustable inlet flap, PTO shaft The hydraulic opening of the inlet flap allows for optimal shredding of even large bushes and corn (seed corn). The mower is currently mounted on a Holder 3.58 and operated in push mode. The mower has front and rear gearboxes. It can be operated in both front and rear push mode. Financing options are available from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to take care of financing options in Germany and abroad. There is the possibility of trade-in of other machines.

Condition: used, Int. No. 11583 For Sauerburger H3000 mulcher, including gearbox, pulley, and side gearbox. Price is half the new price. Financing options are available from 2% for used and new machines. This is solely an advertisement for informational purposes. The purchase agreement can be concluded with us according to our general terms and conditions. We will gladly assist with financing options both domestically and internationally. Trade-in of other machines is possible. Podo Af N Ryepfx Ai Tjgu

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Psdpfx Ae Agbi Dsi Togu Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm.

Condition: like new (used), Year of construction: 2013, operating hours: 1,450 h, functionality: fully functional, turning length: 1,250 mm, spindle bore: 80 mm, Equipment: documentation/manual, Machine with very few operating hours, almost like a new machine. Machine with a lot of accessories. 20 bar pressure in the coolant. Pjdo Afzffopfx Ai Tsgu

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis Pgedpfxoz R T Exs Ai Tju - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: like new (used), Year of construction: 2009, functionality: fully functional, operating hours: 4,000 h, input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, type of input current: DC, pressing force: 160 t, stroke length: 150 mm, operating speed: 50 mm/s, reverse speed: 10 mm/s, table width: 1,300 mm, table length: 2,500 mm, table height: 150 mm, throat depth: 1,300 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 200 mm, clearance between the columns: 2,500 mm, retraction force: 100 t, oil tank capacity: 50 l, total length: 3,500 mm, total width: 4,500 mm, total height: 2,300 mm, overall weight: 6,000 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, We offer this Dimter Profitest 2500 gluing press in like-new condition, manufactured in 2009. Manufacturer: Dimter Model: Profitest 2500 Year of manufacture: 2009 Condition: like new Type: gluing press If you have any questions or require additional information, please send us a message or contact us by phone. Pgjdpfx Ajzin Aiji Tsu

Condition: excellent (used), Year of construction: 2020, This NTX 2500/1500 Second Generation is a fully equipped turn-mill center featuring a separate milling spindle and B-axis, designed for more complex 5-axis machining operations. Spindle hours: ca 7800h Control unit Fanuc F31iB5 with CELOS Ergoline (NTX Gen2) XYZ Travel 675 mm (-125+500) x 300 mm (±150) x 1562 +164mm for ATC Turning length 1530 mm Turning diameter 670 mm B-axis 240°(±120°) Main spindle speed 4000 rpm Through spindle hole 91mm Sub-spindle speed 4000 rpm Main spindle chuck 304mm (KITAGAWA B212) Sub-spindle chuck 304mm (KITAGAWA N-12A) Tool spindle speed 12000 rpm Toolchanger 76 ATC Spindle taper CAPTO C6 Machine weight 18160 kg Machine Height 2750 mm Machine floor space 6250 x 2830 mm Including: Renishaw RMP60 workpiece measuring system Tool presetter Chip conveyor Automatic Centering Steady Rest SMW Mist collector Interlit-TMF300/600 compact filter unit 70 bar Paper belt filter TMF300, tank volume 600L high pressure pump 70 bar - 32 L/min Workpiece unloader, conveyor and stocker Pgedpfx Aio Afnzhj Tju Etc. Full technical description and options in the attached document. Machine can be viewed in operation upon appointment. Available for immediate delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), functionality: fully functional, Year of construction: 1983, working width: 2,500 mm, overall weight: 50,000 kg, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, pressing force: 50 t, type of input current: three-phase, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Pedpfx Aijyznhlj Togu Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,689 h, maximum speed: 40 km/h, color: red, overall weight: 4,700 kg, first registration: 07/2017, total height: 1,950 mm, total length: 3,870 mm, total width: 1,950 mm, power: 55 kW (74.78 HP), fuel type: diesel, gearing type: hydrostat, motor manufacturer: Kohler, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, trailer coupling, Tractor unit implement carrier: - Sauerburger - Grip 4 - 75 Standard - First registration: 04.07.2017 - 2,698 operating hours - 4-cylinder Kohler diesel engine, 55 kW; 2482 cc - Hydrostat, max speed 40 km/h - Trailer coupling 10,000 kg - Front and rear lift - Front lift with side shift - Front and rear hydraulics - Front PTO - Choice of front-wheel, all-wheel steering or crab steering - Warning beacon - Air conditioning - Joystick control - All-wheel drive + lock front and rear - Unladen weight: 2,985 kg; permitted total weight: 4,700 kg - 387 cm x 195 cm x 195 cm (LxWxH) - Municipal vehicle from first owner Receive all newly listed vehicles via email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale! Pgsdpsu A S Dlefx Ai Teu

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Psdez Aaw Sjpfx Ai Togu Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 116/2024, working height: 2,500 mm, input voltage: 400 V, load capacity: 300 kg, type of input current: three-phase, power: 150 kW (203.94 HP), Equipment: CE marking, documentation/manual, Automatic robot for coating regular and irregular shapes of double- and triple-pane insulated glass. This model of automatic coating robot is economical, practical, and suitable for medium-sized and large glass factories. It is designed for all glass manufacturers who want to automate the coating process of insulated glass, thereby reducing workload, saving on labor costs, and improving production efficiency. It ensures a significant reduction in production time due to greater coating precision, thereby eliminating wasted time and materials. Pgodsz R Skajpfx Ai Tou The robot is entirely manufactured by BATTELLINO in Italy.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * 5-axis machine. * Sub-spindle. * Y-axis. * C-axis. * 1.5-meter LNS bar loader. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. Pgodpe Afgmcjfx Ai Tju * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual foot pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor with integrated particle filters. * Extensive selection of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming guide, and operating manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery, unless sold immediately.

Condition: used, workpiece weight (max.): 1,000 kg, total width: 2,700 mm, total length: 5,400 mm, workpiece diameter between centers: 500 mm, workpiece length between centers: 2,500 mm, grinding spindle motor power: 22,000 W, overall weight: 10,500 kg, FORTUNA cylindrical grinding machine Maximum workpiece dimensions: approx. diameter 500 mm x 2500 mm long Control cabinet renewed with frequency inverter for stepless workpiece speed control Grinding spindle overhauled Grinding wheel dimensions: diameter 750 / diameter 305 Center bore: MK5 Tailstock: hydraulically operated Pgedps Afwgyefx Ai Teu Various steady rests and grinding wheel arbors Currently in operation and powered on

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t Podez Aalvopfx Ai Togu - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5290, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: Psdpfx Aisz Aawxo Togu - Year of construction: 2020 - Serial number: 5290 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Pjdpfx Asz Aarcsi Togu Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit Pgedjzw D Haopfx Ai Tsu The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: used, functionality: not functional, input voltage: 220 V, type of input current: AC, input current: 8 A, Equipment: documentation/manual, Used ultrasonic welding system is being sold as defective. Podpfx Ae Af Ihnji Tsgu

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) We can assist with loading! 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Pgjdpfxsztu Aqj Ai Tsu Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport within Europe. - Video of the machine in operation available upon request; on-site testing is welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of use). Availability: Immediately available. We offer a top-class CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). Perfect technical and visual condition, immediately ready for operation. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key technical data: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table Included software: - CNC control - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced features & equipment: - Soft Sense (IHS): Accurate piercing and cutting height - DTHC: Dynamic voltage correction during cutting - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE loading: Professional loading included in the price! - Transport support: We help organize transport in Europe. - A video of the machine in operation is available upon request, on-site testing possible.

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Pgedpfx Aezwvv Tei Tsu Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.