Used Savi Savi Shear, Working Width 700 Mm for sale (107,545)

Condition: used, Savi shear, working width 700 mm Ijdpfx Ajq Tx R Neg Aotn

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. The machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 1,300 mm Cross belt: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Longitudinal sanding belt: 2,100 × 1,350 mm Voltage: 400 V Frequency: 50 Hz Itsdjzxyfhspfx Ag Ajn Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for finish, fine and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transport possible for an extra charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: good (used), 2 circular knife shears - interchangeable frames Manufacturer: SE.H. Iedpfsw Uqn Hsx Ag Aotn Shaft diameter: 150 mm Shaft length: 700 mm Price: 15,000.00 EUR / piece

Condition: used, Cast iron control/tracing marble Iodpfxez H Iy Ts Ag Astn Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T

Condition: used, Pair of cast iron angle plates Iodpfxoz H I A Is Ag Ajtn Width: 1000 mm Height: 2075 mm Depth: 700 mm Unit weight: 1 T

Condition: used, Box van with lid, loading platform dimensions 1000 x 700 mm, TPE tires, load capacity 600 kg. * with one-piece lid * angle steel construction, walls made of corrugated sheet steel, powder-coated brilliant blue, RAL 5007 * usable height 816 mm * lid easily foldable * with eyelets Itsdpfx Agsz Trgfs Aon

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity: 1040 x 3.5 mm - Light gauge sheet metal protection at the rear - Ortlinghaus brake and clutch combination Itsdpfx Agezq Uvxs Asn - Tilting roller table or sheet metal lifting system with plastic rollers - Central lubrication system

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used upright frame for roller conveyors for sale here. When placing an order, please specify the required upright heights and upright depths! Iododf S Eyjpfx Ag Aotn The scope of delivery includes: 1x Upright frame, used Material color: completely galvanized Upright height: 250 to 700 mm (freely selectable by you) Upright depth: 300 to 700 mm (freely selectable by you) Other heights and depths can be manufactured upon request. Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions. - Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all racking systems. - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: used, Workplace flooring, cut to size: B600 x S14mm, black/yellow PVC, 2-layer. Price per running meter. Safety Deckplate. · Two-layer, durable premium ergonomic mat with a non-slip, diamond-plate surface. Iodpfxsz T N Tvs Ag Ajtn · DUALlayer: foamed PVC underside, extremely robust, self-extinguishing.

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: • Year: 2017 Itedpfez E S Hhox Ag Asn • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: used, Horizontal rotary table Itjdpfez Nht Tsx Ag Aen Shelf diameter: Ø 700 mm x Height 160 mm Total external diameter: Ø 790 mm Graduation in degrees Rotation by vernier

Condition: good (used), Interroll roller conveyor with 24 V drive The 24 V roller conveyor enables pressure-free transport of individual items with the aid of a control system. Each zone is driven by a RollerDrive, which is connected to a fixed number of idler rollers via PolyVee belts. Interroll Roller conveyor Length: 1700 mm Roller length: approx. 490 mm Roller diameter: approx. 50 mm Roller material: Steel, galvanized Roller type: Interroll Series 1100 easy-running conveyor roller Drive roll drum motor drive roller Voltage: 24 V Current: 1.10 A Gear ratio: 36:1 Number of rollers: 13 Height: 800 mm Side guide 2 supports, height-adjustable Itedpfx Agotzbwdj Asn More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Oscillating shear machine KÖLLSCHEN, type BSK 2000/2 Cutting length: 2000 mm Cutting thickness: 2 mm Stand overhang: 90 mm Working height: 920 mm Power supply: 380 volts, 50 Hz Motor power: 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet metal holder - Manual back gauge, 500 mm Isdpfx Aeifu Aneg Ajtn - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with a measuring scale - Front side gauge, left, 720 mm - Electric foot switch - Manual central lubrication - Control cabinet on the machine - Machine rests on 4 oscillating elements, approximately 100 mm in height Space requirement (L x W x H): 2800 x 1700 x 1450 mm Weight: 2300 kg Good condition

Condition: used, - For older Lumag SSA400 models with a 16 mm spar width and WITHOUT an "N" at the end of the serial number, and for ALL SSA400HPROS models. Isdpfjz Tlkwox Ag Astn - Made of machine building steel S235JR. - 16 mm spar width.

Condition: used, Puller 20-2, clamping range 150 mm, clamping width 160 mm, 6 tons, KUKKO · Two-arm design · With sliding puller hooks that remain parallel · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal Itsdoz Twrgjpfx Ag Asn · Optimal adaptation of the spindle to the shaft through a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as both an external and internal puller by rotating the puller hooks. · Also suitable for removing asymmetrical workpieces. · Other technical features: weight: 3.01 kg · Material: special steel

Condition: used, Puller 20-3, clamping width 200 mm, clamping depth 250 mm, 8.5 t, KUKKO · Two-arm design · With sliding puller hooks that remain parallel · Special steel · With a robust spindle for high clamping force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adjustment of the spindle to the shaft through a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by reversing the puller hooks Ijdpfx Agez Uhdcj Aetn · Also suitable for removing asymmetrical workpieces · Further technical features: weight: 7.12 kg · Material: special steel

Condition: used, Work stand, max. height 900 mm, wood/steel tube, height-adjustable, ZARGES · Height-adjustable up to 900 mm · Adjustment increments: 100 mm · Support with lateral anti-slip edge · Sturdy steel tube frame, Ø 28 mm Itedpfx Aoz U Uz Uog Aon · Foldable · Non-slip foot caps · Further technical

Condition: used, Puller tool 204-2, clamping range 100 mm, clamping width 100 mm, lateral clamping jaw, KUKKO · with lateral clamping jaw · indispensable for removing flush-fitting ball bearings, gears, sprockets, steering levers and similar parts · the clamping jaw presses the puller hooks firmly against the part to be removed Itedpfx Ajz T E Tfog Aon · Further technical specifications: weight: 2.04 kg · Design: lateral clamping jaw

Condition: used, Pulling tool 204-0, clamping distance 70 mm, clamping width 50 mm, lateral clamping jaw, KUKKO · With lateral clamping jaw · Indispensable for removing flush-mounted ball bearings, bearing rings, and similar parts in precision mechanics, electrical workshops, in pneumatic maintenance, etc. · The claws of the pulling hooks engage under the part to be pulled when the clamping jaw is tightened, releasing it even before the actual pulling process. Itodpsz Tthqofx Ag Ajn · Other technical features: Weight: 0.69 kg · Design: lateral clamping jaw

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm Itjdpfx Agew Sguwe Ajn - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Puller set K-2030, 11-piece. Spreading width: 120 mm. Spreading distance: 100-350 mm. KUKKO · Two-/three-arm design · With extra-slim puller hooks · For tight spaces. Application: for removing gears, bearings, sprockets, and synchronizer sleeves. · Can be used as an external and internal puller by reversing the puller hooks. · Also suitable for removing asymmetrical workpieces. · Other technical specifications: Weight: 8.92 kg. Itjdpfx Agsz Ud Tys Ajn

Condition: used, Puller set KS-2030, 8-piece Spreading width: 90 mm Spreading range: 100-200 mm KUKKO · Two-/three-arm design with quick adjustment and slim puller hooks · For use in tight spaces · Optimal adaptation of the spindle to the shaft through a two-sided spindle tip (ball and point) Itodoz Udygspfx Ag Ajn

Condition: good (used), Belt conveyor 2900 x 700 x 850 mm Belt conveyor Belt width: 700 mm L x W x H = 2900 x 700 x 850 mm Iedpfsvdc Nwex Ag Aotn including Belting replacement conveyor belt You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Manufacturer: unknown Year of manufacture: unknown Overall dimensions (L x W x H) in mm: 4,500 x 1,150 x 700 Width including drive: 1,050 Conveyor length in mm (retracted): 4,500 Conveyor length in mm (extended): 12,500 Conveyor width in mm: 700 Conveyor height in mm: 640 Load capacity between 2 supports in kg: 20 Itsdpfx Agezrr U Io Ajn Support roller axle type: Steel Support roller diameter in mm: 40 Support rollers per axle: 1 Support roller material: Steel Roller pitch in mm (retracted): 50 Roller pitch in mm (extended): 115 Drive: 10 x motor stations Motor manufacturer: SEW Motor specifications: 0.12 kW (total 1.2 kW), 230 V Conveyor speed in m/s: 0.7 Net weight: 360 Special features: Emergency stop, Schuko plug, Steinmetz circuit Condition: used / fully functional Functional test: OK

Condition: used, Cross slide K400, work surface B400xT180 mm, travel distance longitudinal 320 mm, transverse 100 mm · For precise drilling and milling operations on metals, wood, and plastics Iedpfx Agsz Urvvs Aotn · Precisely adjustable prism guide · Ball cranks with adjustable scale rings, 1/10 mm graduation for accurate adjustment · Work surface 400 x 180 mm · Travel distance longitudinal 320 mm / transverse 100 mm · With 5 clamping slots (3 in the work surface and 1 each on both end faces)