Used Schön Ute/B 50 for sale (63,162)

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Pjdpjv Srfwefx Al Sopr Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm Psdpfelp U A Sjx Al Sepr stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm

Condition: used, The Samputensili S 500 B bevel gear cutting machine was designed as a universal machine for flexible machining of gears and is used by manufacturers in gear and transmission technology for the milling of bevel gears. Technical data: Gear diameter: 500 mm Module – max.: 5 Tooth width: 100 mm Space requirement approx.: 4.5 x 3.2 x 2.4 m Ppsdpfx Aloxz Ef Ss Sjr Machine weight approx.: 13,000 kg *The illustration shows the machine in its current used condition. Upon request, it can be supplied partially modernised, or as a completely retrofitted and modernised machine with new CNC control (SIEMENS ONE).

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Beautiful machine - Well equipped - No play in the joints - No oil leaks! VIN: VATZ1265CZB044737 Year of manufacture: 2017 Original operating hours: 8,350 hours Liebherr dealer maintained Special factory paint RAL 1027 curry yellow 4-cylinder inline engine, water-cooled with turbocharging, 103 hp Hydrostatic travel drive with 2 speed ranges – max. 32 km/h * Standard Z-bar linkage * Ride control / boom suspension * Hydraulic quick coupler with installation kit * Liebherr factory-installed central lubrication system * 3rd hydraulic control circuit for high-tip / grab bucket / or 4-in-1 bucket * Steel lamp brackets instead of plastic * Rear tow hitch * "Comfort" suspended driver’s seat * Comfort radio * 2 LED work lights at rear of cab roof * 2 LED work lights at front of cab roof * Adjustable steering column * Rotating beacon / warning strobe on the center of the cab roof * Crane / lashing eyes at rear and front frame * Fire extinguisher * Road approval 32 km/h Tires 17.5 x 25 L3, front axle: 2 tires, 95% tread, like new!! Tires 17.5 x 25 L3, rear axle: 2 tires, 95% tread, like new!!! Permissible total weight approx. 10,500 kg Operating weight approx. 8,500 kg Pedpfsyqn Hljx Al Sepr Offer includes quick coupler and 1.6 cbm standard bucket – Price: €46,900 net (export), plus 19% VAT for domestic sales Optional attachments at additional cost: · Folding bucket 2 cubic meters from €3,550 · High-tip bucket · Screening / mixing bucket, manufacturer "Wolf" · 5-ton pallet fork from €2,190 Prices net plus VAT or for export Sale only to businesses or for export. Sale in as-is condition. No guarantee or warranty. The indicated operating hours or kilometer readings are taken from the hour or odometer counter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not represent a binding offer and the details provided should not be regarded as warranted characteristics. The description and information serve only for general identification of the vehicle and do not constitute a legal warranty. Information is not guaranteed to be complete. Any details/descriptions and images are non-binding and do not represent assured properties. Only the stipulations in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The advertisement may contain typing or data transmission errors. The seller has not inspected the machine. Equipment needs to be checked separately if necessary. We gladly accept your vehicle as a trade-in. For further questions, please contact us. For our international customers, we can prepare all customs and export documents for smooth transfer abroad.

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: gas, color: blue, first registration: 01/2007, Year of construction: 2007, driver cabin: other, Vehicle location: Bovenden, Former combined heat and power unit from a neighboring hospital! Podpfx Ael Rbtnel Sepr Combined heat and power unit for natural gas operation with an electrical output of 48KW & thermal output of 80KW. 4-cylinder gas Otto engine! Engine type MAN E 0834 E Generator type Marelli MJB 225 MA Rated voltage 400V ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, REBAR BENDING MACHINE B 50 / Demonstration unit - CE marking - Year of manufacture: 2025 - Foot switch - Fully equipped machine with extensive accessories - For technical specifications, see data sheet Ppodpfxoy Efuks Al Sjr Dimensions (LxWxH) 1.4x1.3x1.5 meters / Weight 450 kg Errors and omissions excepted

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Swing over bed mm 500 Swing over cross slide mm 270 Distance between centres mm 1000 Spindle mm 50,8 Main motor output kW Machine dimensions: length mm 2575 Pjdpfx Aoy Eyz Sel Sopr width mm 1100 height mm Machine weight kg 1615 - 1715 - 1815

Condition: used, total width: 1,300 mm, total length: 750 mm, total height: 2,900 mm, Empty weight: 1.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive system: Gear drive - Table type: Fixed table - Table length [mm]: 700 - Table width [mm]: 600 - Drilling depth [mm]: 220 - Drilling capacity [mm]: 50 - Min. spindle speed [rpm]: 61 - Max. spindle speed [rpm]: 1239 - Transport dimensions: 750mm x 1300mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Ppedpfx Asyznbrel Ser VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2012, condition: good (used), Year of manufacture : 2012 Film width : 50mm Product size range min. mm 50 x 40 x 5 Podpfx Alsiqfkwj Sspr Product size max width x height mm 330 x 160

Condition: used, mast type: simplex, Charger Ppsdpfxjyvcm De Al Ssr Mast type: Standard

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 58 h, functionality: fully functional, The KIRA B 50 cleaning robot from Kärcher is a useful addition to any cleaning team. Intelligent, autonomous, and with the functionality of a scrubber-dryer, it efficiently handles floor cleaning of medium to large areas with consistent cleaning results, freeing up cleaning staff to focus on more demanding tasks. Pjdsv Unlxspfx Al Sspr

Condition: used, x-travel 2120 mm y-travel 1000 mm z-travel 850 mm Control Fanuc table surface area 3600x1300 mm dividing head CNC Tool changer 60 Pos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Pjdpfx Aljyqt Ine Sepr We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Ppedpsyplwfefx Al Ssr Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: refurbished (used), Year of construction: 2024, operating hours: 772 h, functionality: fully functional, working width: 510 mm, area performance: 3,060 m²/h, overall weight: 235 kg, water tank capacity: 50 l, battery voltage: 24 V, The Kärcher B50 W Bp Pack 115Ah D51+Dose+Rinse+Autofill is a compact yet powerful scrubber-dryer equipped with numerous innovative features. It features a stepless drive, a detergent dosing system, automatic shut-off of the fresh water supply during filling, and a dirty water tank rinsing system. Additionally, the machine can be configured via app, providing access to maintenance and troubleshooting assistance. We have completely overhauled the Kärcher B50 W, checking and cleaning all components for functionality. The brush deck and suction bar have been sandblasted and newly powder-coated in our facility. The machine is fitted with two new maintenance-free gel batteries that can be conveniently charged using the integrated charger. New suction lips, a new brush, and a mop are included in the delivery scope. The machine is ideal for daily cleaning of workshops, schools, sports halls, or similar facilities. Technical data: Working width: 510 mm Ppedpfxjyrquhj Al Ssr Tank capacity: 50 liters / 50 liters (fresh/dirty water) Operating time: max. 3 hours Area coverage: 3,060 m²/h

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Ppjdjlmmwropfx Al Sjr

Condition: excellent (used), pressure 50 t Pjdpjtrhf Aofx Al Sopr throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: used, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm Ppjdpfjt U Sc Djx Al Sor bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: good (used), Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz Pedpfx Asvmpgnel Sjpr -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer gearbox: ZAE geared motor with brake -Gear: Type M 50 B i = 40 : 1 -Speed: 7/70 rpm -Motor: Kobold type PO619-3-16/2MB -Power: 0,04/0.55 kW / 280 /2800 rpm -Shaft: Ø 20 x 25 mm / 23 x 48 mm -Protection class: IP44 -Brake: 8 Nm -fan motor Ppsdpfx Ajmrxanjl Ssr -Dimensions: 610/195/H183 mm -Weight: 26 kg

Condition: excellent (used), end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm Ppodpfx Aljb A Huve Ssr -Working height: 100 mm -carbide-tipped -Recording: SK50

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Ppodpfxsx Ehlce Al Ser

Year of construction: 1995, condition: used, Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning via diamond control of length and angles Ppodpfxjv Ip T Ds Al Sor Angles can be swiveled inwards and outwards (20-135°) Moving roller conveyor Soundproof cabin Minimum quantity spray device chip conveyor belt Weight: approx. 2,800 kg

Condition: used, Year of construction: 2012, operating hours: 3,947 h, Equipment: all wheel drive, Mini excavator New Holland E 50 B SR . * Operating weight 4945kg * Air conditioning Pjdpfx Ajup R Uuol Sepr * Year of manufacture 2012 * Hours 3975 * Machine is in very good condition * Ready for immediate use

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. Ppsdpfx Aljx Ein Ss Sjr The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 Pjdpsfg U Ttsfx Al Sepr feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark