Used Schaal Automatic Stamping Press for sale (30,237)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Djdpszab Ibsfx Aqcoch Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Dedpfjdzqltjx Aqcoch Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Year of construction: 2001, functionality: fully functional, Technical Specifications Press capacity: 800 kN (80 tons) Stroke rate: 60 – 320 strokes per minute (SPM) Stroke adjustment: 8 – 80 mm Ram adjustment (shut height adjustment): 80 mm Dcjdpfx Aqeyidnyocjh Table size: 830 × 700 mm Bolster plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed height over table: 120 mm Ram area: 500 × 400 mm Ram bore: Ø 50 × 90 mm Ram centering bore tolerance: 30 H7 mm Precision guided ram, multi-roller guidance system. Main motor power: 23 kW Drive system: Flywheel drive with planetary gearbox and pneumatic clutch/brake combination. Machine weight: approx. 8000 kg Gripper Feed Schaal SZV 3: Feed length: 4 – 150 mm Strip width: 10 – 270 mm Strip thickness: 0.1 – 4 mm We also have on stock Schaal SEP 80 with SWV3E 300 mm wide Servo Feeder. Unidor Control, Machine and Operator Safety. Full Technical Documentation in German including Parts list and Technical drawings.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Dcjdpfoy E Exijx Aqcsh Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: used, Year of construction: 1993, Number of drilling spindles: 8 pcs Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Drilling direction: from above, fixed Number of material clamps: 2 pcs Dsdeza Hlfjpfx Aqcjch Type of material clamping: pneumatic Design: stationary Location:

Year of construction: 2000, condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible. Dodpfszadmgsx Aqcech

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication Dsdpju Icxqofx Aqcjch - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: excellent (used), Year of construction: 2010, Helmerding Press Type: KDH 315/2100/2 Pressing force: 3,150 kN Stroke height: 40–200 mm Dodpfjy Tqahex Aqcech Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,000–1,600 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. Press after significant service work - details after direct contact. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Djdpfx Aey Udzhjqcsch Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Dodpei Db Ibefx Aqcech Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) equipped with control and Unidor tool and press safety monitoring system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003), and Soprem BR19/160/12/U Straightening machine (2003). Available as a complete turnkey lot. Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Sound Enclosure / Cabin Included: W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003) Including Soprem BR19/160/12/U Straightening machine (2003) Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Dcjdpfx Aoy S E U Rsqcoh Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: excellent (used), Year of construction: 2016, Mossini press Press force: 6,300 kN Stroke rate: 25-53 spm Stroke length: 400 mm Dsdoy Rtfnjpfx Aqcjch Slide adjustment: 500 mm Installation height: 1,200 mm Table size: 3,200 x 1,200 mm Millutensil coil line Strip width up to 1,300 mm Strip thickness: 0.5–5.0 mm Coil carrying capacity: 12,000 kg

Condition: excellent (used), Year of construction: 2013, Mossini press Press force: 10,000 kN Djdpfx Asy Rrwpoqcech Stroke rate: 20–55 rpm Stroke height: 350 mm Ram adjustment: 300 mm Shut height: 1,450 mm Table size: 4,500 x 2,500 mm 2 sliding tables Millutensil coil line Strip width: 250–1,850 mm Strip thickness: 0.5–4.0 mm Coil load capacity: 24,000 kg

Condition: excellent (used), Year of construction: 2019, Mossini Press Press force: 4,000 kN Stroke rate: 28/82 rpm Stroke height: 250 mm Ram adjustment: 350 mm Shut height: 900 mm Table size: 2,850 x 1,300 mm Millutensil Coil Line Dedpfxjy Rrtks Aqcjch Strip width: 100–800 mm Strip thickness: 0.5–4.0 mm Coil carrying capacity: 10,000 kg

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Dsdpfxsv U R Ags Aqcjch Fully rebuilt and revised in 2019

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. Dedpfxetty Nkj Aqcsch -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: ready for operation (used), Year of construction: 2001, operating hours: 46,500 h, functionality: fully functional, machine/vehicle number: 11623, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 500-110B (500 kN, year 2001, Kom. 11623) equipped with Pressensteuerung Typ B control, Unidor tool and press safety monitoring system, and EFD Micromat strip lubrication. The line includes a sound-insulating safety cabin, finished-parts output conveyor, PBK PE 250/200 USG coiling machine (2004), and HURAS HPK 1500-220 horizontal decoiler (2015). Available as a complete turnkey lot. Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model BSTA 500-110B Serial / Commission No. Kom. 11623 Year of Manufacture 2001 Control System Type B Control Software Version 7.3.5 — Language: German / English Operating Hours 46,800.0 h (as shown on press control) Press Force (Nominal) 500 kN Total Weight approx. 8,700 kg CE Marking Yes — original OEM nameplate Sound Enclosure / Cabin Included — W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable) 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range 64 mm Tool opening width (max.) 1,100 mm Bolster plate — Width × Depth 1,080 × 650 mm Ram face — Width × Depth 980 × 420 mm Baseplate opening W × D 1,060 × 200 mm Strip feed height (adjustable) 60 – 140 mm Max. strip pass-through width 250 mm Model: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage 3 × 400 V / 50 Hz Max. connected load 74 kVA Main motor power 22 kW (AC inverter-driven) Control voltage (DC) 24 V DC Pneumatic supply 6 – 10 bar (R ½" connection) Dedpfoy I A Rzsx Aqcech Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including HURAS HPR 1500 220 Horizontal Decoiler (2015) Including PBK PE 250 200 USG Coiling machine (2004) Includign EFD Micromat Strip Lubrication System Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm Dodetx E Rqepfx Aqcsch ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: Metal Stamping Press ALP-25C (25T, 2020) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25C Year of manufacture: 2020-11 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 45 mm Stroke rate: 145 strokes/min (SPM) Max. die height: 180 mm Height adjustment: 35 mm Ram working area: 170 × 150 mm Bolster area: 370 × 240 mm Country of origin: China Applications: The ALP-25C press is suitable for: Dcodpfx Ajxmwnijqceh stamping, cutting, bending, and forming metal parts; small pressing operations in tool, metal structure, and automotive parts manufacturing; working with thin and medium-gauge sheet metal. If you have any further questions, please feel free to contact us.

Year of construction: 2021, condition: excellent (used), For sale: Metal Stamping Press ALP-25J (25T, 2021) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping a wide range of metal components. Technical specifications: Nominal capacity: 25 T Stroke: 100 mm Stroke rate: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Dedpfx Aoxm U S Soqcoch Ram working area: 560 × 370 mm Bolster area: 250 × 220 mm Country of origin: China Applications: The ALP-25J press is suitable for: - Stamping, cutting, bending, and forming metal components - Small press operations in tool, metal structure, and automotive part manufacturing - Working with thin and medium-thickness sheet metal If you have any further questions, we will be happy to answer them.

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Dsdpjx I Nfrefx Aqcjch Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, For sale: a well-maintained, semi-automatic 180-ton press with low usage, as shown in the pictures. Dodpex Tg Disfx Aqcech

Condition: excellent (used), Year of construction: 2002, Manufacturer: ARISA Type: S-2-630-350-FS Dodpsyx S Iwsfx Aqcoch Pressing force: 6,300 kN Table size: 3,500 x 1,450 mm Ram size: 3,500 x 1,400 mm Stroke adjustment: 25–300 mm Installation height: 700 mm Ram adjustment: 300 mm Strokes per minute: 20–70 Control system: SIEMENS S7 Including DIMECO coil line

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Dsdpfx Aqon Smg Tjcjch Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Dcsdoxwp Nyepfx Aqcoh Subject to prior sale!