Used Scheer Top | With Template for sale (9,110)

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. Hodpfxjyaqtte Ac Nefh

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. Hedsyxr T Tspfx Ac Nefh The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,441 h, load capacity: 1,400 kg, lifting height: 3,160 mm, free lift: 1,630 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Hfjdpfx Aceyp T Sds Neh Rear tires condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Tested with 80% remaining capacity Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Description: Overhauled, serviced and inspected according to FEM 4.004 (Government safety regulations) // Completely repaired, serviced and checked Sideshift 3rd valve Rear working light Front working light Safety light,

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Router FG 314-2 - with overhead router HM / 18 Scheer - Milling length: 900 mm - Milling depth: 0–90 mm - Complete with template - Weight approx. 21 kg - 2000 watts - 7 kg - Speed: 10,000 – 18,000 rpm Transport available at additional cost! Hsdsx R Efgepfx Ac Nofh Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Hfedpsy Sd Szofx Ac Njh Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Includes a ramp.

Condition: good (used), mileage: 922,532 km, power: 427 kW (580.56 HP), first registration: 10/2016, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 8,500 kg, loading space length: 7,040 mm, loading space width: 2,460 mm, loading space height: 2,940 mm, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, onboard computer, parking heater, retarder, soot filter, spoiler, = Additional options and accessories = - Heated mirrors - Enclosed cab - Cab - Refrigerator - Leather interior - Leather upholstery - Air suspension - Particulate filter - Auxiliary heater = Notes = Scania R580 Topline 6x2 – Box with side doors – Retarder – Full air – Leather MY: 31-10-2016 KM: 922,532 YS2R6X20005440494 Box: 704 x 246 x 294 Retarder Full air suspension Leather interior Navigation system Fridge = Further information = Transmission: Opti Cruise, 12 gears, automatic Front axle: Tire size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Tire tread left: 70%; Tire tread right: 70% Rear axle 1: Tire size: 275/70R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70% Hfedpszai Sbefx Ac Noh Rear axle 2: Tire size: 275/70R22.5; Twin tires; Lift axle; Max. axle load: 8,500 kg; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30% Number of cylinders: 6 Gross vehicle weight: 28,000 kg Upholstery: Leather Technical condition: good Visual condition: good

Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter Hjdpfxowh Rlgo Ac Njfh - Plastic rollers, width 200 mm - Vertical plastic rollers

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel Hedev Dm Epjpfx Ac Nsfh 230 Volt Power Supply Price € 3,950

Condition: good (used), Semi Automatic Constant Heat Sealing Bag Machine 300mm heat seal line With foot pedal control Adjustable temperature control for different bag thickness Temperature range 30 to 200 degrees C 220 / 240 volts, 50 / 60 HZ With adjustable bag loader for different bah heights Hjdpfx Acjutg Dao Njfh In excellent condition Price € 495

Condition: good (used), Saxon Bag Sealer Stainless Steel With Stainless Steel Conveyor 230 Volts Single Phase Power Hjdpfx Asv Dm Dlec Nefh Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Price € 5,950

Condition: used, REF: MM6436 Chinese 4-head filler with gating system and touch-screen controls. Valves capable of hot filling. Hjdpfxsza T I He Ac Nofh Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: good (used), Loos 8000kg/h. Bj.2001. top condition. incl. Weishaupt burner G70 Hfedpsm Rhd Djfx Ac Neh

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Includes Loadmaster. Hodszcvx Tjpfx Ac Nsfh

Condition: good (used), Year of construction: 1997, cutting length (max.): 3,100 mm, Veneer saw with saw blade and disc instead of a planing unit. Hodpfxjzcc I Us Ac Njfh It first saws, and then instead of planing, it mills with a disc (the milling cutters are mounted on the side of a disc). Maximum cutting length: 3100 mm. Equipped with a rear support and finger stop.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Hjdpfx Aevi Eypoc Nofh Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Max. cut length 300 mm

Condition: used, Used machine Hodoyncpiepfx Ac Nofh Equipment: - Cutting length 2500 mm - With handwheel tensioning Availability: short-term Stock location: 63934 Röllbach

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Hsdpjv Trlmefx Ac Nofh Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Hfjdpspdqzxofx Ac Nsh Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 115 mm, cutting width (max.): 4,200 mm, height adjustment type: electric, SCHEER PA 7004 – 4200 x 4681 mm LIKE-NEW panel dividing system DIRECTLY FROM THE MANUFACTURER with lifting table, optimization software, and new PC control LIKE-NEW 1 year warranty For sale is a fully overhauled SCHEER PA 7004 panel dividing system with a processing capacity of 4200 x 4681 mm. The system has been technically and visually refurbished and features a new industrial PC with a Linux operating system, network connectivity, and remote maintenance capabilities. Ideally suited for industrial carpentry workshops, furniture manufacturers, interior design companies, and panel processing companies that value precision, performance, and high availability. Equipment and highlights: New PC control New industrial PC with Linux operating system Network connectivity (LAN/WLAN) TeamViewer remote maintenance USB interfaces Graphical cutting plan display Multilingual user interface 15" flat screen in the swiveling control panel Optionally available with label printing system Panel saw FM 22-4200 Hardened guides Servo-driven saw unit Feed speed 2–70 m/min Return speed up to 100 m/min Automatic lowering of the saw unit Main saw 11 kW Scoring saw 2.2 kW Automatic cut height adjustment Cut-off device Lamella protection curtain Safety guard locking Workpiece clamping protection Technical data: Cutting length: 4,200 mm Fence depth: 4,681 mm Cutting height: 115 mm Fully automatic angle pressing device For precise cross cuts with automatic workpiece fixing. Material feed table HP 5100 Servo-driven material pusher 2 top guides Rack and pinion guide 7 retractable clamping fingers 3 controlled extraction bolts 11 triple roller tracks Feed speed 25 m/min Return speed 50 m/min Four-spindle lifting table TE 5085 Table length 4,200 mm Table depth 2,800 mm Lifting height 640 mm Lowering height 280 mm Motor-driven roller tracks Right and left operation Recesses for rear loading Automatic alignment systems Longitudinal alignment WP 5038 Double execution Two motor-driven alignment fingers For panel lengths up to 4,800 mm Cross alignment WP 5037 3 pneumatic stop and alignment cylinders Integrated braking system Workpiece support Angle stop table HP 5094 2 workpiece support tables HP 5095 Air cushion system LK 5161 Radial fan and piping system included Optimization software OPTIMIN The system features the proven OPTIMIN cutting plan optimization. Bills of materials are entered directly into the machine, automatically optimized, and immediately made available for processing. Advantages: Material savings Shorter processing times Optimal utilization of the system Easy operation Additional equipment: Powered roller track on the right Set of carbide saw blades Operating manual Hardware key for optimization software Conclusion A powerful and extensively equipped panel dividing system with modernized control technology, automatic alignment, lifting table, and optimization software. The machine has been completely overhauled and is ready for immediate use. ✓ LIKE-NEW ✓ New industrial PC with Linux ✓ Network compatible & TeamViewer Hsdpfoza Efwox Ac Njfh ✓ Optimization software OPTIMIN ✓ 1 year warranty

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 115 mm, cutting width (max.): 4,200 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, SCHEER PA 7012PK – 4200 x 4200 mm Like-new, high-performance panel dividing system with postforming unit, head cutting saws, and vacuum loading system. LIKE NEW - FROM THE MANUFACTURER - 1 year warranty For sale is a powerful and extensively equipped SCHEER PA 7012PK panel dividing system with a cutting capacity of 4200 x 4200 mm. The system has been professionally overhauled and is ideally suited for industrial furniture and interior design companies with high demands for precision, performance and automation. Technical data Cutting length: 4,200 mm Cutting height: 115 mm Saw blade overhang: 135 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Automatic cutting height adjustment Residual cuts up to 5 mm possible Hardened guides Automatic forward and backward movement of the saw unit Main and scoring saws with integrated extraction Fully automatic angle pressing device Material feed HP 5107-4200 Servo-driven material pusher Feed speed up to 25 m/min Return speed up to 50 m/min 7 retractable clamping fingers Closed Pertinax surface in the stop area Air cushion system instead of rollers Control & Software with integrated industrial PC. Highlights: SSD hard drive Linux operating system Network-enabled (LAN/WLAN) Remote maintenance via TeamViewer / Remote Desktop Graphical cutting plan display Multilingual user interface 17" flat-screen monitor in swiveling control panel Virtually unlimited cutting plan management Optimization software OPTIMIN The integrated cutting plan optimization enables the direct creation and calculation of optimized cutting plans on the machine. Bills of materials are entered and automatically converted into economical cutting layouts. Postforming unit Integrated postforming unit Material height up to 80 mm Hfsdpjza Eazofx Ac Nsh Lift table TE 5085-4200 Four-spindle lift table Can be loaded from three sides Table size: 4,200 x 2,200 mm Stack height up to 650 mm Motor-driven roller conveyors on the right and left Fully automatic alignment systems Longitudinal alignment WP 5035-4200 Automatic positioning Working area 2,000 – 4,200 mm Transverse alignment WP 5034-4200 Three alignment fingers Working area 1,200 – 2,200 mm Front tables Angle stop table HP 5094-2406 3 workpiece support tables HP 5095-2406 Pertinax supports Air cushion system LK 5162 for all front tables Head cutting saws Main head cutting saw KS 5000-4200 Fully automatic positioning Adjustment range 300 – 2,100 mm Extended travel up to 3,100 mm Power 7.5 kW Integrated top and bottom extraction Additional head cutting saw Manually adjustable Positioning 0 – 50 mm from the stop edge Power 7.5 kW Vacuum loading system TE 5088-4200 Additional pusher with integrated short-stroke vacuum loading system. The panels are automatically transferred from the lift table to the pre-stacking table and fed into the processing process. This enables short cycle times and a high degree of automation. Conclusion An extremely rare and fully equipped industrial panel dividing system with extensive automation, postforming equipment, double head cutting system and vacuum loading. Ideal for the furniture industry, shop fitting, interior design, as well as larger carpentry and joinery businesses. Machine available immediately – 1 year warranty.

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Hfjdpfxeyzt Nzj Ac Njh Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit.

Condition: like new (used), - TOPSOLID’PDM SERVER license - TOPSOLID’DESIGN PRO license with USB dongle - TOPSOLID’DESIGN PRO + CAM M2 + PP HAAS – FANUC license with USB dongle Hfjdpfxezbyb Ns Ac Neh

Condition: ready for operation (used), Year of construction: 1989, cutting length (max.): 3,100 mm, Pneumatic pressure beam; rear stop Hfjdpfxjyn Nr Ds Ac Nsh

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW Hfedpfx Aeb A Iiajc Nsh -Recording: 10 x 17 mm -Number: 1x quill processing units available Price: per piece -Weight: 25 kg/piece

Condition: used, Number of boring spindles 1 St. Motor output 1,1 kW Workpiece thickness ca. 100 mm Hodelfcnwepfx Ac Njfh Working width 650 mm Foot-operated drill machine Scheer type BM340