Used Schelling Fh4 580 for sale (1,334)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: 241.371, saw blade diameter: 350 mm, total length: 7,300 mm, total width: 7,600 mm, cutting width (max.): 5,800 mm, power: 15 kW (20.39 HP), cutting height (max.): 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 46 A, plate length: 7,300 mm, platform width: 5,800 mm, saw blade bore: 30 mm, table height: 970 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Working height, longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Tjdjytfxwjpfx Ahmsc Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Condition: used, machine/vehicle number: 008582, Max. panel width: 2200 mm Tsdoy Stvispfx Ahmjc Max. panel length: 4200 mm Main saw blade projection: 105 mm No of Grippers: 9 Panel Rotation Station: yes

Condition: good (used), Year of construction: 2011, machine/vehicle number: 241.186, functionality: fully functional, input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 3,300 mm, saw blade diameter: 350 mm, Equipment: saw blade guard, For sale is a professional and efficient panel saw, IMA Schelling model FT4 330. The machine is currently in operation at a custom furniture manufacturing facility. It has been regularly serviced and is ready for immediate use. It is used for cutting particleboard, MDF boards, and kitchen countertops. Key information and technical condition: Year of manufacture: 2011 Power: 15 kW Power supply: 400V (3 phases) 50Hz Condition: good, in continuous operation Tedpfjzvyc Ujx Ahmjc Usage history: the saw has been used in a single-shift operation, 8 hours per day.

Condition: excellent (used), Year of construction: 2019, Panel saw SCHELLING FH4 with turning device and panel storage system. Todszfavyspfx Ahmjc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 521.111, saw blade diameter: 360 mm, type of input current: three-phase, cutting width (max.): 3,300 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 51 A, Equipment: saw blade guard, For sale: a professional and efficient IMA Schelling FH 4 330 panel saw. The machine is used in a custom furniture manufacturing facility. It is regularly serviced and ready for immediate operation. It is used for cutting chipboard, MDF boards, and kitchen countertops. Tjdpfx Aozvyggehmjc Key information and technical condition: Year of manufacture: 2017 Power: 18kW Power supply: 400V (3 phases) 50Hz Condition: good, in continuous operation Usage history: the saw has been operated in a single-shift mode, 8 hours per day.

Condition: used, machine/vehicle number: 008597, Position 1: Automatic Loading Panel Saws SCHELLING-VS 12 - FH6 - FH4 Tjdpoy Stvpefx Ahmoc Position 2: Front-Loading Panel Saws SCHELLING-VS 12 - FH6 - FH4 Position 3: Automated Warehouse SCHELLING-VS 12 - FH6 - FH4

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Tedpfeyufixex Ahmsc Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: used, Year of construction: 1980, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 4,300 mm, saw blade diameter: 400 mm, saw blade bore: 30 mm, total length: 6,000 mm, total width: 5,000 mm, total height: 180 mm, overall weight: 3,500 kg, table height: 900 mm, Equipment: saw blade guard, scorer, We are offering this used Schelling FH430 panel dividing saw, manufactured in 1980. Tedpszw D Dxefx Ahmoc Manufacturer: Schelling Model: FH430 Type: Panel dividing saw Year of manufacture: 1980 Condition: used If you have any questions or require further information, please do not hesitate to contact us by sending a message or calling us.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Tedpsx Ebzdsfx Ahmoc Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Tedpfou A R D Dex Ahmjc Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 7 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) _____ Max. blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 - Kw 18 Adjustable speed of the saw carriage (m/min) 0 - 160 No. 3 Front supporting tables with Air blowing system Total power (Kw) 35

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Tjdpfxjp R Sdhj Ahmsc Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Condition: used, empty load weight: 7,540 kg, maximum load weight: 14,460 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2001, loading space length: 10,450 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, aluminum rims, 1 axle, BPW axles, air suspension, forced steering, lashing eyes, supports, crane behind the house, emergency stop, foldable, 2-point hydraulic support, 3x hydraulic extensions, 1x mechanical extension. Superstructure: Crane Ferrari 7m/t, Honda GX 630 separate engine for crane hydraulics, crane, 2.66m = 2.35t, 11.29m = 0.47t. Crane: 2.66m = 2.35t, 4.19m = 1.545t, 5.89m = 1.015t, 7.69m = 0.73t, 9.49m = 0.57t, 11.29m = 0.47t, (mechanically possible for an extra charge, 13.25m = 0.34t), drum brakes, center and corner outriggers foldable, 2,000 crane operating hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Tsdpfxsi Rq I Ne Ahmsc

Condition: ready for operation (used), Year of construction: 2011, A panel storage system including a saw is available. 1) Surface storage Becker, year of manufacture: 2011, length: 24900mm, width: 14170mm, stack height: 2000mm, lifting height: 2100mm, max. panel dimensions X/Y: 4200mm/2100mm, min. panel dimensions X/Y: 1800mm/600mm, max. lifting weight: 250kg, travel speed horizontal/vertical: 120m/min/40m/min, stack positions: 38, panel capacity at 20mm panel thickness: approx. 3400pieces. Including saw linkage, offcut handling with automatic measurement and separation device. 2) Panel sizing saw Schelling fh 4, year of manufacture: 2011, max. panel dimensions X/Y: 4100mm/2100mm, max. panel thickness: 60mm, thickness tolerance: 0.2mm, max. saw blade diameter: 350mm, cutting length: 4200mm, feed speed: 80m/min. Including storage linkage, lifting and lowering device, central cleaning system, infeed and outfeed systems and further accessories. This is a complete and connected system, including control system, software and optimization connections. Documentation available. An on-site inspection is possible. Expected to be available August 2026. Tjdpfx Aheyrtagsmec

Year of construction: 2016, condition: good (used), functionality: fully functional, Storage System Machine Designation Tedoxdtv Ropfx Ahmoc Vacuum Stacking Device Machine Number: 150.138 Type: VS 16 Length of Carrier Track (Travel Path): 28.5 m Bridge Span (Travel Path): 16 m Overall Height: 3600 mm Clearance Height: 2700 mm Maximum Stacking Height (incl. supports): 2000 mm Stack Gap: 100 mm Positioning Accuracy: ±5 mm Support Height: 60 mm Input Stack Height: 1900 mm Length Adjustment Vacuum Load Handling Length: 2000 – 4200 mm Vacuum Suction Capacity: 2 x 40 m³/h Table: Panel Sizes for laminated chipboard, laminated MDF boards, laminated HDF boards, solid wood and composite panels, blockboards, honeycomb panels Length: 1250 - 4100 mm Width: 330 - 2100 mm Thickness: 4 - 100 mm

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Tsdpfoxvc N Djx Ahmjc Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Tsdpfxexvc Rzs Ahmec Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: used, Year of construction: 2003, TECHNICAL DATA SHEET 1. General Information Manufacturer: SCHELLING Anlagenbau GmbH Country of Origin: Austria Machine Type / Model: FX-H 430 / 400 Machine Number (Serial No.): 220.047 Year of Manufacture: 2003 Machine Condition: Used / Second-hand 2. Application Primary Application: Plywood cutting Material Type: Plywood sheets and wood-based panels Cutting Type: Straight panel cutting, industrial panel sizing 3. Electrical Specifications Supply Voltage: 400 V Frequency: 50 Hz Phase: 3-phase (3~) Rated Current: 40 A Installed Power: 21 kW Tedpfsydimajx Ahmec 4. Mechanical / Functional Characteristics Machine Category: Industrial cutting machine Construction: Heavy-duty industrial steel frame Drive System: Electric motor-driven cutting unit Control System: Siemens components (to be confirmed) 5. Safety & Compliance CE Conformity: Applicable (documentation to be confirmed) Safety Features: Emergency stop, protective guards

Condition: ready for operation (used), Year of construction: 2007, Main motor (kW): 27 Tsdpfszgwpgjx Ahmsc Infeed device Saw length (mm): 3300 Saw width (mm): 3300 Panel thickness (mm): 40 All specifications are manufacturer’s data.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 208.025, functionality: fully functional, cutting width (max.): 4,200 mm, cutting length (max.): 4,200 mm, stack height: 2,000 mm, Auction of a panel dividing saw with automatic magazine! TECHNICAL DETAILS Tjdpfx Ahezhm E Homjc Capacity: 4,200 mm x 4,200 mm Saw blade overhang at 90°: 72 mm Saw blade overhang at 45°: 50 mm Saw carriage feed rate (forward): 0-100 m/min Saw carriage feed rate (reverse): 0-100 m/min Feed rate of program slider: 0-25 m/min Program slider return speed: 80 m/min Collet maximum opening: 84 mm Collet positions: 65/245/395/985/1,605/2,225/2,845/3,465 mm Cross-pressure range: 50 - 1,250 mm MACHINE DETAILS Main saw motor: 14 kW Scoring saw motor: 1.5 kW Electrical supply: 400 V, 50 Hz, 3-phase Automatic magazine Magazine dimensions: 33.1 x 9.4 m Magazine height: 3,600 mm Stack height: 2,000 mm Input stack height: 1,900 mm Magazine speed X: 0-150 m/min Magazine speed Y: 0-150 m/min Magazine speed Z: 0-60 m/min Maximum panel weight: 300 kg Length adjustment of vacuum lifter: 2,000 - 4,200 mm Width adjustment of vacuum lifter: 1,000 x 2,100 mm Vacuum pump: 40 m³/h Rotating device: 90°

Condition: used, Year of construction: 2005, - Saw motor: up to 19 kW at 2930 rpm, 50 Hz - Scoring motor: 1.5 kW at 2830 rpm, 50 Hz Panel dividing saw Manufacturer: Schelling Type: FM-H 430 Year of manufacture: 2005 Technical data Todpozuy Diefx Ahmjc Infeed speed: Forward: 0-25 m/min Reverse: 80 m/min Saw feed speed: Forward: up to 120 m/min Reverse: 120 m/min Saw motor: up to 19 kW at 2930 rpm, 50 Hz Scoring motor: 1.5 kW at 2830 rpm, 50 Hz Clamping opening: 113 mm Cutting straightness: +/- 0.1 mm over a cutting length of 3 m Dimensional accuracy: +/- 0.2 mm length, +/- 0.2 mm width, +/- 0.3 mm diagonal Main saw blade: Diameter: 450 mm Inner bore diameter: 30 mm Saw blade thickness: 4.4 mm Number of teeth: 72 Scoring blade: Diameter: 200 mm Inner bore diameter: 20 mm Saw blade thickness: 4.2 / 3.5 mm Number of teeth: 36 Edge scoring blade: Diameter: 220 mm Inner bore diameter: 20 mm Saw blade thickness: 4 / 4.8 mm Number of teeth: 2 x 24 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Tedpfxowuucio Ahmjc Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 Tsdpstk It Sjfx Ahmsc År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: not inspected (used), Year of construction: 1993, power: 11 kW (14.96 HP), cutting width (max.): 4,300 mm, saw blade diameter: 400 mm, cutting length (max.): 4,260 mm, cutting height with scoring (max.): 105 mm, Equipment: scorer, Machine including Laweco conveyor lines with lifting device, load capacity 5,000 kg, platform size 4,100x2,100 mm. The machine comes from a company liquidation. Tsdpfxsx Iuzxs Ahmoc

Condition: ready for operation (used), Schelling D66 Planer width 650 mm Maximum planing height 220 mm Number of knives 4 Table length 1,100 mm Number of feed rollers 1 Main motor 5.5 kW Table rollers Knife shaft with strip planing knives Material transport via steel roller Weight approx. 1,085 kg Space required, length 1.2 m Tedpfszcutpsx Ahmec Space required, width 1.4 m Space required, height 1.1 m Condition: Functionality tested

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: diesel, operation weight: 7,500 kg, axle configuration: 4x2, first registration: 10/1977, Year of construction: 1977, Equipment: hydraulics, Technically in order Tsdpfx Aot S Idrshmjc