Used Schiess 2500 for sale (3,128)

Condition: used, faceplate diameter 2500 mm Thickness 240 mm T-slot - distance 175 mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m Optional with 4 jaws €3750 The tech. Data are manufacturer or operator information and therefore non- Lhsdpfx Aeyuqiqsgtjk binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, faceplate diameter 2500 mm Thickness 240 mm T-slot - distance 175 mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m Optional with 4 jaws €3750 With bed from Schiess KZ 250 Optionally, a Schiess KZ 250 drive gear can be purchased for €9,500 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Lodpfsyuqknex Agtohk We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1980, turning diameter 7000 mm faceplate diameter 3500 mm workpiece height 3000 mm 160 mm 1998 Lhodpfsuddlzsx Agtek Control Siemens 840 C max. table load 60000 kg electr. connected load 400 V Serial number 11 33 0051 total power requirement 71 kW weight of the machine ca. / t required space 13 x 6 m The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm Ledpjuddpgjfx Agtohk turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Portal-Type Multitasking Turning and Milling Center in Gantry Design Brand: SCHIESS | Type: VMG 5-PS | Year of construction: 2010 / Start-up: 2011 Lhodjy Dvwyepfx Agtek The machine can be inspected by appointment. Condition: Operational / ready for use. TECHNICAL DATA: - X-axis (Gantry): 13.500 (20.000) mm - Y-axis (Support slide): 10.900 mm - Z-axis (RAM): 3.000 mm - Drive power RAM: 100 kW - Passage width max.: 6.500 mm - Faceplate diameter: 5.000 mm - Workpiece weight on the faceplate max.: 150 tons - CNC Control System: SINUMERIK 840D sl Additional excellent, comprehensive features. Detailed technical data sheet and information on equipment available on request. No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Lodpfozvnbxsx Agtjhk Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Condition: as good as new (ex-display), Year of construction: 2012, ⭐ PREMIUM LOW-HOURS BORING MILL — READY FOR IMMEDIATE USE ⭐ Ledpfx Aepa N Uhegtehk Bohrwerk SCHIESS SMT BMT 130 (2012) | Low Hours (~10k) | Heidenhain iTNC 530 | Ball Bar Tested ​Description: ​PREMIUM OFFER: LOW HOURS & VERIFIED GEOMETRY ​The Opportunity: You are looking at a Schiess SMT BMT-130 (Year 2012) with a transparent history of light usage. With only ~10,000 Spindle Hours (and 8,900 Program Run Hours), this machine has averaged less than 1 shift per day since new. It is NOT a tired production machine. ​✅ JUST COMPLETED (Ready for Inspection): ​Geometry Verified: Passed the Renishaw Ball Bar Test with excellent results (Proof of precision available). ​Aesthetics: Professional Fresh Paint applied. The machine looks excellent. ​Functionality: Automatic Tool Changer (ATC) fully serviced and tested. ​TECHNICAL DATA (Verified on Screen): ​Control: Heidenhain iTNC 530 ​Spindle Time: approx. 10,090 h ​Program Run: approx. 8,900 h ​Spindle Diameter: 130 mm (ISO 50) ​WHY BUY THIS MACHINE? ​Authentic Condition: The low hours are genuine and verified by the control unit. ​Ready to Work: Geometry checked, ATC working, looking great. ​Price: At €230,000, it offers the best Price/Performance ratio on the market for a 2012 machine. ​VIDEO PROOF by request Technical data: Spindle diameter - 130mm Spindle Type - ISO 7:24 No50 Spindle Speed - 3000 RPM W axis - 800mm Y axis - 2000mm Z axis - 1600mm X axis - 4000mm Table size - 1800x2200mm Table loading capacity - 12.000kg General dimensions - 6800x6300x4600mm Machine Weight - 35000kg

Condition: used, Year of construction: 2009, turning height: 3,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 3,400 mm, faceplate diameter: 2,950 mm, workpiece diameter (max.): 3,300 mm, VERTICAL LATHE SCHIESS CNC FAGOR 8070 (C-AXIS + LIVE TOOLING) TECHNICAL SPECIFICATIONS Brand: Schiess Model: TVMF 320-3000 Year: 2009 Maximum turning diameter: 3400 mm Maximum turning height: 2580 mm Load capacity: 20 t C-axis (0.001°) CNC: Fagor 8070 (70 kW) Table diameter: 2950 mm Distance between columns: 3300 mm Angular milling head PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE) Ljdpexh Hmkofx Agtohk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Lhsdpfxjx Svm Rs Agtok 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm Lhjdpewu D Afefx Agtjk T size: 22mm Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Ledpfx Agezdk A Uotshk Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6692 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump 125 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Lodpjzc Iavofx Agtohk Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6693 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump length ways 125 mm Hole to hole jump in width 250 mm Length:1200mm Ledpfxjzc H Uxj Agtehk Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1980, SCHIESS HBM Horizontal milling boring machine CNC YOM 1980 X – travel 5900 mm Y – travel 3400 mm Z – travel 1350 mm W—travel 900 mm (together with z or with milling head) Spindle diameter 180 mm Table 2500x2000 mm, load 30 tons, for positioning with new DRO Floor plates for fixation of workpieces Controls CNC NUM with side PC for files uploading Angle head extended ISO 40 Angle head extended ISO 50 Universal angle head ISO 100 Chips conveyor Overall dimensions 13mx11m, floorplates 10 meters, height 2+5 meters, spindle 180 mm Ledpohh Dqhsfx Agtehk Total weight of machine 96 tons, can be transported with 5 trucks

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, overall weight: 50,000 kg, working width: 2,500 mm, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated. Lhsdpfx Agsyznhlstok

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. - Table diameter: 1,250 mm Ledpfoyfurqjx Agtjhk - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl - Tool holder Inspection is possible at any time by prior appointment.

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Faceplate diameter: 1800 mm Swinging diameter: 2000 mm Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Lhedpfxozadago Agtek Tool changer: 12 positions

Condition: good (used), Make: SCHIESS FRORIEP Type: DV 45 Year: 1980 Specifications Metric US Standard Table Length 3000 mm Table Width 3000 mm Lodpfjku Aaljx Agtjhk Table load 40000 Movement V-axis 1600 mm Rotation B-Axis 360000 ° Rotation speed B-Axis 100 Grad/Min Omw/min. Movement speed V-axis 4500 mm/min. Dimensions (Estimate) Length 5320 mm Width 3000 mm Height 1080 mm Weight 24000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1990, condition: used, spindle taper 2 x SK 40 forward bearing diameter 110 mm milling head speed 100 - 4500 U/min milling drive 5,1 kW workpiece length - max. 830 mm workpiece dia. with double equipment max. 135 mm taper diameter 78 g6 mm centre height 260 mm turning speed range - stepless max. 15 U/min Ljdpjyt Rwrjfx Agtohk distance of spindles 135 mm spindle nose DIN 55026 Gr. 5 stroke of workpiece slide 810 mm Feed speed max. 6 m/min. surface area 200 x 1750 mm stroke of tool slide 120 mm Feed speed max. 2 m/min. column movement 200 mm tailstock quill stroke 100 mm morse taper 3 MK centre height 260 mm axial distance of the quills 135 mm passage of steadyrest 40 - 80 mm control SIEMENS SINUMERIK 810 weight of the machine ca. 6,5 t with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolant

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Speed: 0 - 315 rpm Lhjdpswqk Umefx Agtek Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm D 66 – 85 mm L = 8000 mm D 86 – 105 mm L = 12,000 mm D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Ljdpfxjy H Ebte Agtshk Range 2 450 - 450 - 160 kNm

Condition: used, turning diameter over bed 3800 mm turning diameter over slide rest 3200 mm turning length 12000 mm faceplate diameter 3100 mm steady 2 bed width 4000 mm turning speeds 200 U/min workpiece weight 90.000 kg Hydrostatik Spindellagerung Hydrostatik Lynette The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Lsdpfx Ageyqwa Ustehk If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1972, faceplate diameter 1200 mm swing diameter 1600 mm turning height 1250 mm slide adjustment 800 mm Control Siemens type 840 c power capacity 56 kW The machine was overhauled and rebuilt by Seidler. No. 97237 No. 37 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Ljdpfx Ageyqvfietehk Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Lhjdpjvp Shgsfx Agtsk Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: ready for operation (used), Year of construction: 2000, Two used mining winches are offered in very good condition, fully functional. 1. Hydraulic winch type 5101 Defries, serial no. 11617105, pulling force 20 kN, year 1985 (conversion 2010), weight 1,200 kg Ljdpjyzncijfx Agtehk 2. Planeta, type SB306-E-SP, serial no. 2002968, pulling force 50 kN, year 2000, weight: 1,128 kg (cabinet 164 kg).