Used Schlipp, Enos Druckfüller for sale (225)

Condition: used, Year of construction: 1974, Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data  Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) Labelling Machine – Enos Euro C5000 (2019) Capacity: Up to 5,000 containers/h (depending on label and format) Formats: Bottles, cans, other cylindrical containers Application: Labelling Configuration: Manual side-barrier adjustment (tool-free) Scope of Delivery  Isobaric Filling Machine | Schilpp | Contibloc 20/5 | 1974 | 20 filling valves, 5 crown capping heads Labelling Machine | Enos Euro | C5000 | 2019 | Manual side-barrier adjustment   Nledpsyr Nr Ssfx Aa Ioc

Condition: used, Year of construction: 2008, Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data:  manufacturer: ENOS, Italy model: Eticap year of manufacture: 2008 labelling Heads: 2 (wet-glue heads) Head 1: front and neck labels Head 2: back labels operation Direction: Left to right production Capacity: 4.000/h adjusted for: cylindrical glass bottles 0,7 L = Ø75mm 1,0 L = Ø86mm condition: Stored off-line since 2020, machine in a good condition actual label sizes:  front label: 131mm height, 77mm width back label: 114mm height, 66mm width Nlodpfx Aey Scb Iea Ioc

Condition: used, Year of construction: 2015, Overview This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data Capacity: approx. 1,200 bottles/hour (standard labels) up to approx. 1,500 – 1,800 bottles/hour (small labels) approx. 1,100 bottles/hour (front and back from one roll) Formats: Diameter 50 – 100 mm, conical bottle shapes Application: Bottle labelling (beverage, wine, spirits) Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll Label positions: Front, back Incl. Capsule applicator, Capsule shrink unit, Conveyor system and Accumulation table Nlsdpfey Hkghsx Aa Ijc

Condition: used, Year of construction: 2002, Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data Capacity: approx. 2,500 bottles per hour Labelling technology: Pressure-sensitive (self-adhesive) Number of stations: 3 Applications Front label Back label Seal label Bottle Formats Container type: Glass bottles Supported formats: Bordeaux Burgundy Format parts: Included for both bottle types Njdpfoyxxxcox Aa Iolc

Condition: used, Year of construction: 2002, Overview This ENOS Base automatic self-adhesive labelling machine was manufactured in 2002 and is designed for the application of front and back labels on various bottle shapes. The machine uses pressure-sensitive (self-adhesive) labelling technology, which allows flexible processing without the need for mechanical format parts. The system can handle round, cylindrical, and square bottles within a volume range of 0.2 L to 1.0 L, making it suitable for a wide variety of beverage, spirits, or specialty product applications. With a production capacity of approximately 1,000 bottles per hour (0.7 L format), the machine is well suited for small to medium production environments. Technical Data Manufacturer: ENOS Model: Base Machine type: Automatic self-adhesive labelling machine Year of manufacture: 2002 Labelling technology: Pressure-sensitive (self-adhesive) Label positions: Front label Back label Capacity: approx. 1,000 bottles per hour (at 0.7 L) Bottle formats: 0.2 L – 1.0 L Bottle shapes: Round Cylindrical Square Format parts: Not required Condition: Used, dismanteled  Nodpfsyuulpox Aa Iolc

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,000 h, functionality: fully functional, Glue labeling machine for one label Various magazines available for different labels hourly output approx. 2000 bottles Njdeq H Axiepfx Aa Ijlc Bottle stars for approx. 90mm diameter installed

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm Closure types: Crown caps Filling system: Isobaric (for beer and carbonated beverages) Product types: Beer and other carbonated drinks Incl. dummy bottles and CIP cups With double pre evacuation systsem for lower oxygen pick up Machine is cleanable with a CIP system Njdpfx Aaezcu Slj Iolc

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data Manufacturer: Krones AG Machine Type: Filling and capping monoblock Model / Identification: Krones Modulfill Year of Manufacture: 2012 Application: Filling and closing of glass bottles Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) Filling System: Volumetric filling Filling Valves: 60 Capping Heads: 12 Closure Type Observed: Plastic screw cap Target Output: approx. 15,000 bottles/hour Operating Hours: 41,381 h Production Counter: 40,754 h Control Interface: Krones iPanel CD Electrical Supply: 400 / 230 V Current Type: AC 3/N/PE Frequency: 50 Hz Full Load Current: 36 A Construction: Stainless steel and glass safety enclosure Condition: Used, observed in operational production environment Nledpfozcga Usx Aa Ijc

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data Capacity: approx. 70 cans/min (500 ml) approx. 100 cans/min (250 / 330 ml) Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) Application: Filling and seaming of cans (beer, soft drinks, RTDs) Configuration: 10 filling valves / 2 seaming heads Filling system: Counter-pressure filling Filling pressure: approx. 0.15 – 0.4 MPa Filling temperature: approx. 1 – 4 °C CO₂ management: Pre-purging and undercover gassing, oxygen reduction system Seaming system: Lid size 202 (200 optional), manual lid feeding Control system: Siemens S7-1200 PLC with HMI touchscreen Drive system: Frequency inverter (Danfoss), unified drive Utilities: Power consumption: approx. 5 kW Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa CO₂ supply: ≥ 0.3 MPa Water consumption: approx. 0.2 m³/h Dimensions: approx. 3,153 × 1,980 × 2,350 mm Weight: approx. 5,500 kg Scope of Delivery Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer Control system | Siemens | S7-1200 | PLC with touchscreen HMI Drive system | Danfoss | Frequency inverter Filling valve cores | 1 set Seaming rollers | 1 set (#1 and #2) Seaming chuck | 1 unit Can mouth seals | 10 units Filling valve seals | 10 sets Nodpfxozbhi Ij Aa Iolc

Condition: used, Year of construction: 2020, Overview This isobaric filling machine was manufactured in 2020 by Rizzolio. The machine is designed for bottle filling and is equipped with a double pre-evacuation system, making it suitable for products such as frizzante. It is currently stored and mounted on wheels for mobile use. No capper is included. The machine can be viewed in person at any time.  Technical data Capacity: approx. 550 bottles/hour (0.33 L, depending on operator) Formats: 0.33 L / 0.5 L / 0.75 L (general range approx. 0.3 L – 1.0 L) Application: Bottle filling Configuration: Filling system with double pre-evacuation, integrated product pump, 3×6 air pipes Bottle diameter: approx. 55 – 90 mm Adjustment: Stepless adjustment of bottle diameter and height Nlsdpfx Aaoy Ttzus Iec

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  Capacity: 10,000 bottles per hour Formats: 1,0 l PET bottles 0,5 l PET bottles 0,33 l PET bottles Working direction: Clockwise Rinsing system: 36 rinsing nozzles 2 channel rinser With stainless steel pipes Filling system: Isobaric system 36 filling valves Capping system Manufacturer: Arol 9 capping heads With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps Dimension Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  Rinser, filler, capper in triblock construction Vacuum barrier system Stainless steel CIP cups Cap feeding system Nljdswiy Tvspfx Aa Ijc

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C & 1500bph 15°C Currently set up for: Glass Bottles: 0,187ml 0,375ml 0,750ml 1500ml  Caps/Corks Cork (boucheuse liège) Screw cap Decorative Cap (Champagne style) Incl. CIP and wine filtration Nodpsv Aag Defx Aa Ijlc

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pick&Place neckhandling system Integrated foaming system Neumo butterfly valves Nljdpfx Aaowiizpe Isc

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  Capacity: 44,000 bph (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: Isobaric (mechanical filling system) Number of filling stations: 144 Crowner: 24 stations (crown cork) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: Air-conditioned, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Direction: Left to right Scope of Delivery Filler: KHS Innofill DMG SVF 144-KK24 Crown corker with 24 stations Control cabinet and operator panel Bottle clamping star wheels CIP cups High-pressure injection (HDE) Bottle shower at discharge Bottle table in roof optic Central lubrication system VPN remote access capability Safety housing (updated in 2016, with flushing system) Touch panel Cork feeding unit by NSM Filling level inspection system: Krones Checkmat (2015) Nedpfx Ajwif Dgea Iolc

Condition: used, Year of construction: 1991, Overview This isobaric PET bottle filling and capping machine was manufactured in 1991 by German company SEN AG (Seitz Enzinger Noll AG). The block machine includes an Zalkin capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected.  Technical data  filling and capping machine as a block system number of filling stations: 124 number of capping stations: 20 isobaric filling system suitable to carbonated soft drinks capping system: Zalkin for screw caps  cap feeding system: Gassner  capacity: 19.900/h at 1,5L formats: 1,5L PET and 0,5L PET   direction: left-right  Nlsdpfxsy Sccle Aa Isc

Condition: used, Year of construction: 1997, Overview This rotary pressure filling machine was manufactured in 1997 by NATE. The Veral 60-12 is designed for the filling and closing of beer and carbonated beverages in glass bottles. The machine operates as a pressure filler with vacuum pre-evacuation, ensuring stable filling conditions for carbonated products. It has been fully overhauled in 2023, including reconstruction of filler, capper and vacuum pump. The machine is not yet in production after rebuild and is prepared for PLC and control system integration (not included).  Technical data Capacity: approx. 20,000 bph (500 ml) Formats: 0.5 L long neck / 0.66 L / 1.0 L Application: Filling of beer and carbonated beverages Configuration: 60 filling valves / 12 capping heads Filling system: Pressure filling with vacuum pre-evacuation Filling pressure: approx. 0.05 – 0.06 MPa Product temperature: approx. 1 – 7 °C Material: Stainless steel (AISI 304 / 316) Nledpfoy Azrtex Aa Ijc

Condition: used, Year of construction: 2013, Overview  The pressure filler was built in 2013 by the German manufacturer KHS. The pressure filler is still in use at a large German brewery and can be inspected at any time.  Technical data  Capacity: 22,000 - 65,000 bph  Number of filling stations: 168 Number of capping stations: 24  Pitch circle filler: 5040 mm Scope of delivery  Valve node Vacuum unit Hygienic inlet Fill level and closure inspection Rejection and rejection belt Technical documentation Incl. program backup Extensive transporters available, which can be purchased additionally Nedpfxel Sm S De Aa Iolc

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  Capacity: up to 1,600 cph (33 cl); output up to 650 L/h Formats: 33 cl standard, 33 cl sleek, 50 cl standard Application: Can filling Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns Lid format: CDL202 Can diameter: 50 mm – 85 mm Nledpfoyudacex Aa Ioc

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: Screw capper – 11 heads Crown cork capper – 11 heads Closure handling: Integrated closure sorting systems on the machine Bottle Formats: 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request Nsdpfxjytqzwj Aa Ielc

Condition: used, Year of construction: 2013, Overview  This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data  Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery  Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system   Nodpfx Aasymg Hie Islc

Condition: used, Year of construction: 1996, Overview This isobaric PET bottle filling and capping machine was manufactured in 1996 by German company Krones. The block machine includes an ALCOA capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected.  Technical data  filling and capping machine as a block system number of filling stations: 132 number of capping stations: 30 isobaric filling system suitable to carbonated soft drinks capping system: ALCOA Kupi 30/1080 for screw caps  cap feeding system: Gassner  capacity: 36.000/h at 1,0L  including neck handling system  bootle lifting cylinders direction: left-right / clockwise Nlodpfxoydbrbj Aa Isc

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available Nlodpfjvy D Adex Aa Ioc

Condition: used, Year of construction: 2015, Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V   Nljdpjxd Ez Eofx Aa Isc

Condition: used, Year of construction: 1966, Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  Capacity: 2,500 bph Formats: Prepared for 0.33 L Longneck Filling temperature: 6°C Overhaul & refurbishment details General overhaul in 2016: Pre-evacuation New rotary ball connection New stainless-steel table New electrics New valve control cabinet in stainless-steel design 0.33 L guiding set Sihi vacuum pump Renewed in 2023: Seals on lifting cylinders and filling valves Vacuum and overpressure valves equipped with new seals and springs Nodpeyb Sdvefx Aa Iolc

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) Capacity: Up to 3,000 bottles/hour (330 ml) Filling system: 12 counterpressure long-tube valves Capping system: 4-head crown capper (26 mm) Bottle format: 0.33 L (prepared) Working pressure: 2.0 – 2.2 bar Working temperature: 0 – 4 °C (optimal) Oxygen pickup: 10–12 ppb dissolved oxygen Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump Product pump: Included CIP system: Automatic and programmable Machine direction: Left to right Construction: AISI 316L stainless steel Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) Capacity: 2,000 – 6,000 bph Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm Labelling stations: 1 (option for second station) Label type: Self-adhesive (also supports polypropylene labels) Bottle infeed: Screw conveyor system Sensors: Self-adjusting photocell for transparent labels Control system: Processor board with inverter-based speed regulation Output system: Smoothing unit with adjustable perforated belt Transport system: 1.5 m conveyor with traction motor Rotary tables: 1 infeed + 1 outfeed, both motorized Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer Function: Seals top and bottom of cartons Adjustments: Width and height adjustable Conveyor: Plastic rollers, 1.5 – 4.5 m   Nljdpfx Aeyb S S Hoa Isc