Used Schmersal End Switch for sale (11,990)

Condition: like new (used), Ui 500V, Uimp 6 kV, AC-15 Application: Machinery/Plant Engineering Nedpfx Aezfgbpja Reda Width: 40 mm Height: 37 mm Length: 118 mm Weight: 96 g Condition: Like new

Condition: excellent (used), DEMAG / ABUS / STAHL / KONECRANES / SCHNEIDER / TELEMECANIQUE – Pendant control stations / Pendant pushbutton stations / Empty enclosures: DEMAG Pendant Control Station / Pendant Pushbutton Station: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). 3. Type: DSE 10CS – 1 unit (new). 4. Type: DST 9 SP222 – 1 unit (new). 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Control Station / Pendant Pushbutton Station: Ndodpeyvuaksfx Aa Rea 1. Type: 70268 – 2 units (new). 2. Control cable Type: SC15X1 L., 2000 mm – 2 units (new). STAHL Pendant Control Station / Pendant Pushbutton Station: 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). KONECRANES – 1 unit (new). SCHNEIDER Pendant Control Station / Pendant Pushbutton Station: 1. Type: XACA 1436217 – 1 unit (new). TELEMECANIQUE Pendant Control Station / Empty Enclosures: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). ROTARY SWITCH – pushbutton – 1 unit (original packaging).

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approx. 40 operating hours) processed during trial operation! For sale is an absolutely new, high-end deep-drawing packaging machine, MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project, operated there for only a few test cycles in a sterile cleanroom, and is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: New, unused (New Old Stock), stored dust-free in a cleanroom • Operating hours: Only approx. 60,000 individual packs (corresponds to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length of base machine: 5,500 mm (Divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (Worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 tracks side by side / 1 row (pp. 13-14) • Actual inner cavity dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (Mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch codes and best-before dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for autonomous tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC edge strip winder RSW 20 with integrated tear-off control and winding drive for clean film disposal (p. 12). Nodpjzwgxrjfx Aa Rsda • Gas flushing system (MAP): Protective gas injection nozzles installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic diagrams in German included (pp. 19-20). 💰 Price € 29,900,- net excl. VAT • Shipping costs: Available upon request for Europe • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock (Changes and errors in technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex works.)

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush Nodoxwp A Hspfx Aa Roda • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: excellent (used), Inductive sensor, electronic sensor, safety switch, inductive proximity switch Ndjdpfxem Ui H Dj Aa Rja -Manufacturer: Schmersal, Inductive sensor proximity switch, 2 pieces, unused, original packaging -Product Type: IFL 15-333-11yPG -Quantity: 2 sets available -Price: per set -Cardboard dimensions: 125/85/H40 mm -Weight: 0.3 kg/carton

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 Nodjum I Sfspfx Aa Rsda End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: new, Schmersal 3ö 24DC/96 safety switch SN: L0082004, unused in opened original packaging, 100% functional, scope of delivery as per photos. Njdpfx Aaoy Nrz Ss Roda

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg Njdpjrcnm Nefx Aa Rjda

Condition: used, Safety switch, safety switch, magnet door contact safety switch -Manufacturer: Schmersal, magnetic door contact safety switch, packaging 2 pieces per box Ndsdjlfihyepfx Aa Rea -Type: BNS303-11Z -ID no.: 1032179000 -Number: 5x box available -Price per piece -Dimensions: 130/85/H45 mm -Weight: 0.2 kg/pc.

Condition: used, Safety switch, safety switch, magnet door contact safety switch -Manufacturer: Schmersal, magnetic door contact safety switch, packaging 2 pieces per box -Type: BNS250-11ZG -Number: 1x box available -Price per piece -Dimensions: 130/85/H45 mm Ndodpfjlfih Dsx Aa Rea -Weight: 0.2 kg/pc.

Condition: good (used), Safety relay, safety controller, emergency stop switching device, switching device, undervoltage relay, safety switching device -Manufacturer: Schmersal, safety relay safety switching device unused original packaging -Type: SRB 301LC/BR -Number: 25x relay available -Price per piece Nedpfomkm Nrox Aa Rsda -Dimension: 120/25/H100 mm -Weight: 0.2 kg/pc.

Condition: used, Limit switches, buttons, safety switches, position switches, safety switches, safety limit switches Nsdjg Sxzhspfx Aa Rsda -Manufacturer: Schmersal, position switch unused in original packaging -Type: MD 441-11y-M20 -Number: 2x switches available -Price per piece -Dimension box: 160/105 / H115 mm -Weight: 1.8kg / piece

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 720 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 90 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch, emergency stop switch and restart protection. Without Fixing Holder: max. Length of workpiece, finished: 300mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 90kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 720x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Nodpfxeid Ixde Aa Rsda inklusive folgendem Zubehör: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: used, mileage: 11,545 km, power: 450 kW (611.83 HP), first registration: 03/2024, fuel type: gasoline, next inspection (TÜV): 08/2028, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, second-hand vehicle warranty, Internal Vehicle No.: G200312 German Vehicle Available immediately at our location in Kaufungen - Kassel More INFO at: Dirk Bruchhäuser *Viktoria Sologubova (Polish, Russian, Ukrainian, English) MAYBACH Equipment Highlights: Champagne glasses Decorative elements MANUFAKTUR wood walnut brown open-pored aluminum lines Parking package with remote parking functions ENERGIZING Package Rear MANUFAKTUR emblem package platinum color Driving Assistance Package with DRIVEPILOT High-end interior package ENERGIZING AIR CONTROL Rear axle steering Auxiliary heater Cooler compartment DIGITALLIGHT with projection function Alternative smartphone position in the rear Automatic telephony 53.3 cm (21") Maybach forged wheels in multi-spoke design MBUX Interior Assistant MBUX Interior Assistant in the rear TV tuner ... BRAKE CALIPERS PAINTED GOLD 19" STEERING COLUMN BRACKET, MANUALLY HEIGHT ADJUSTABLE WHEEL PROTECT SET AUTOMATIC TRANSMISSION REAR AXLE LEFT-HAND DRIVE CHASSIS WITH 4-MATIC/ALL-WHEEL DRIVE CAPACITY 6.0 LITERS CONTROL CODE SINDELFINGEN PLANT SUN PROTECTION PACKAGE SPECIAL MODEL "GRAND EDITION INTERIOR" SPECIAL MODEL R 170 USA SPECIAL MODEL FLEET PACKAGE EXCLUSIVE PACKAGE REAR SEAT COMFORT PACKAGE WEAPONS COMPARTMENT IN TRUNK MEMORY PACKAGE PANORAMIC SLIDING ROOF AND SUN SHIELD ILLUMINATED SUMMER TIRES LM 7 SPOKE DESIGN 16 INCH "SARGAS" REAR SEAT BELT LOCK WITH SWITCH CLOTHING BAG FRONT PASSENGER SEAT WITH WEIGHT DETECTION (WSS) 1/3 REAR SEAT CUSHION REMOVABLE STEP BOARD TRIM ILLUMINATED PLUG SOCKET 12 V IN LOADING COMPARTMENT EXTERIOR LIGHT AND VIEW PACKAGE PEDESTRIAN PROTECTION FRONT AXLE HALF SHAFT, LEFT FRONT AXLE HALF SHAFT, RIGHT SERVICE SET TRACKING LEATHER INDIVIDUAL REAR SEATS ACTIVE PARKING ASSISTANCE DAYTIME RUNNING LAMP TYPE DESIGNATION ON TRUNK LID - ELIMINATION TYPE DESIGNATION ON FENDER/SIDE DELETION LEATHER PINE GREEN MEMORY PACKAGE (DRIVER SEAT, STEERING COLUMN, MIRROR) MEMORY REAR SEAT SKI BAG EQUIPMENT MADE TO PA 1 REAR SIDEBAG LEFT AND RIGHT EQUIPMENT MADE TO PA 1 PURE RED - NON-METALLIC INVALID/ACTIVE CHARCOAL FILTER REFRIGERATOR IN REAR INVALID / MOBILE ADDITIONAL CELLPHONE IN CENTER CONNECTION WIRING HARNESS FOR TELEPHONE CODE TEMPORARY INVALID INVALID / CELLPHONE IN FRONT ARMREST LANGUAGE INSTRUMENT CLUSTER - GERMAN PREPARATION FOR NAVIGATION RETROFITTING REMOVAL COSTS FOR CODE 668 REMOVAL COSTS FOR CODE 542 AND 668 FABRIC FLORA VIOLET UNI AMETHYST MICA SILK GLOSS FABRIC ELEGANCE - BLACK/ANTHRACITE FABRIC ELEGANCE - BLUE DIRECT BUSINESS CENTER, NATIONAL/EXPORT INTERNATIONAL AUXILIARY ORGANIZATION AUTOMATIC CLUTCH SYSTEM (AKS) DYNAMICS SEAT, FRONT LEFT AND RIGHT CREAM HEATED STEERING WHEEL FABRIC ELEGANCE - BEIGE FABRIC ELEGANCE - RED FOLDING TABLE, MANUALLY ADJUSTABLE, IN REAR LEFT AND RIGHT FABRIC ELEGANCE - BLACK/ANTHRACITE FABRIC ELEGANCE - BLUE INFLATION PRESSURE CONTROL HIGH LINE/MID LINE UNDERBODY PROTECTION (SKID PLATE) AIRMATIC DUAL CONTROL / AIR SUSPENSION SEMI-ACTIVE INVALID/ OUTSIDE REARVIEW MIRROR LEFT AND RIGHT CRYSTAL DIGENIT BLUE - METALLIC PAINT LEATHER EXCLUSIVE - RED LEATHER EXCLUSIVE LIGHT BROWN LEATHER EXCLUSIVE - BROWN LEATHER EXCLUSIVE - RED ELECTRIC BLIND FOR REAR WINDOW THEFT WARNING SYSTEM AUTOMATIC CLIMATE CONTROL CLIMATE CONTROL SYSTEM IN REAR PAJETT RED - METALLIC HEAT INSULATING + IR REFLECTING SAFETY GLASS ALL-ROUND HEADLINER ALCANTARA BLACK INTELLIGENT HEADLIGHT CONTROL PLUS (IHC+) Nsdpfx Aezknzuea Rsda BASIC WHEEL

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3458 F, working width: 2,500 mm, Double tenoner FRIULMAC 2003, 3+3 heads Nsdpox Rdrfofx Aa Rjda

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, workpiece weight (max.): 2,000 kg, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick! Nsdey Tni Tspfx Aa Roda

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Njdpow Enqujfx Aa Rjda Units available: 8 units in stock

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Nedpfezc Rdksx Aa Rjda

Condition: used, Year of construction: 2013, functionality: fully functional, URBAN post milling cutter. Njdpfxjzpyhke Aa Rsda

Condition: used, Year of construction: 2007, saw-blade dia. 250 mm turning speeds 2800 U/min pressure 6-7 bar Ndsdeztrwlopfx Aa Rsa weight of the machine ca. 273 kg

Condition: excellent (used), ABB SACE Emax E3S/MS 25 2500A 4-Pole Drawout Switch-Disconnector with Cradle ABB SACE Emax E3S/MS 25 heavy-duty low-voltage air switch-disconnector, rated at 2500 A, supplied with its withdrawable chassis and rear busbar connections. Designed for use as a main incomer, bus coupler or isolating switch in industrial low-voltage distribution systems, data centres, generator installations, production facilities and critical-power applications. This is an MS switch-disconnector / isolator, not a circuit breaker fitted with an electronic protection trip unit. Technical details Manufacturer: ABB Ndedpfx Ajzlyk Dea Roa Series: SACE Emax E3 Model: E3S/MS 25 Equipment type: Air switch-disconnector / isolator Rated uninterrupted current, Iu: 2500 A at 40°C Number of poles: 4 Version: Withdrawable / drawout Rated short-time withstand current, Icw: 75 kA for 1 second Manual stored-energy operating mechanism Push ON and Push OFF controls Mechanical position and spring-status indicators Rear high-current busbar terminals Withdrawable chassis / fixed part included Key-locking mechanism fitted

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: water, total width: 1,150 mm, total length: 2,500 mm, total height: 1,300 mm, fuel: diesel, overall weight: 1,410 kg, cubic capacity: 5,320 cm³, noise level: 68 dB, power: 80 kW (108.77 HP), battery voltage: 24 V, Equipment: documentation/manual, Warehouse clearance, everything must go: HELVETICA POWER® 100 KVA / 80 KW emergency power generator, diesel generator, power generator ⭐️ CE-compliant according to applicable regulations ⭐️ with 100% "brushless" copper alternator, Stamford type: "CE"-certified high-quality synchronous alternator with 100% copper winding! ⭐️ digital control with remote control for operation as an emergency power generator – new! ⭐️ "Diesel engine from RICARDO ("KOFO" premium series) ⭐️ including ATS unit for emergency power operation ⭐️ Super-Silent type, noise (LP1m) < 68 dB ⭐️ Diesel particulate filter and air filter in stock Ndodpfx Ajzwfk Toa Rsa About the engine manufacturer Ricardo ⭐️ Ricardo has been building ship diesels for almost 100 years and is a leading engine manufacturer in this field. ⭐️ This engine comes from the premium series – a top-of-the-line unit with top-quality components Warranty · Guarantee · Service ⭐️ One year manufacturer's warranty! ⭐️ Optional: 2-year warranty/guarantee, which goes far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Deutschland (for Europe) ⭐️ Switzerland-wide and Europe-wide service available. Payment · Delivery ⭐️ Payment: upon purchase 🚚 Collection: Konstanz warehouse (Germany) 🚚 Delivery: possible throughout Germany (mainland) for an extra charge – worldwide delivery on request Other models & configurations ⭐️ Are you looking for a different unit? ⭐️ More or less kW, alternative engine (e.g. Cummins, Deutz, Volvo) ⭐️ larger tank, additional tank or tank and water heater ⭐️ individual configuration is possible Technical data Rated power: 80 KW/100 KVA 50 Hz 220V / 400V - three-phase water-cooled, with 1500 revolutions with AVR (for load-dependent speed control) large tank for 8 hours of operation Size: 2500x1150x1300mm Weight: 1410kg including sockets: 1x 230 V / 16 A 1x CEE 400 V / 32 A 1x CEE 400 V / 32 A 2x CEE 400 V / 63 A Other When using your power generator, please pay attention to the relevant guidelines that must be followed. Keyword list: power generator, generator, emergency power unit, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup electricity, power supply, power source, self-sufficient power supply, island operation, construction power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, quiet generator, silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, changeover switch, power distributor, CEE

Condition: excellent (used), functionality: fully functional, Horizontal profiling machine with automatic feed and work cycle. Tool rotation speed is adjustable via electronic control. The high tool rotation speed improves the quality of machining at variable angles and on coated profiles. Performs 90° and variable-angle milling from -45° to +45°. Soundproofed work area with fully enclosed housing. Self-tilting adjustable stop. Voltage: 220 V. Ndedpfxezr H Ico Aa Roa

Year of construction: 2016, condition: used, Serial no. 15-3599B, primarily comprising: feed station with 2 product lines, continuous cycle conveyor, 2 forming stations, turning station, micro-lubrication station, through-feed washing machine, Manufacturer: Bous, Model: Duwamat K1000 WSST, Year: 2016, Serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16–24°, fine filter, oil separator, control cabinets, system control with operator panel, Manufacturer: Siemens, Model: SIMATIC HMI touch, inspection system with 2 cameras, Manufacturer: KEYENCE, Model: Vision System, eddy current testing device, Manufacturer: Rohmann, Model: Elotest IS500, laser marking system, Manufacturer: Videojet, Model: 7510, fiber laser, laser power 50 W, discharge station, roller conveyor system for crate removal, 2 product lines, satellite terminals, switch cabinets, safety devices, plexiglass enclosure, peripheral units, including extraction system, Manufacturer: ESTA, Model: Whispersog 2.2 JET, overnut feeder with loading bunker, vibrating bowl feeder, separation unit, loading station, set of trolleys, set of load carriers, trolleys. Nsdpfx Aasy A Ih Uo Rjda Subject to prior sale.

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 Nodjk Aa Ebspfx Aa Reda RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics