Used Schoen Ute 100 for sale (23,375)

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm Gisdpfelp U Euex Alxst table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm Godpfx Aleyzd I Uexsit -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Gsdpfx Aogbvkvslxoit Stroke: 600mm Weight: 43 tons Height: 4700mm Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Gsdjlmmwrjpfx Alxjit

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm table surface area 470x400 mm Gedpfx Aolp Uz Ujlxoit weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm Gisdpfelp U A Sjx Alxst

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Gedpfox Ehlcex Alxoit

Condition: good (used), Year of construction: 2000, functionality: fully functional, pressing force: 20 t, stroke length: 150 mm, table width: 800 mm, table length: 500 mm, installation height: 400 mm, hydraulic double column press Schoen UTE/B20 year 2000 used control Siemens S 7 pressing force: 200 kN Installation height 400 mm stroke: 150 mm table width: 800 mm Gsdpfx Ajt Dzpfolxjit Table depth: 500 mm

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation Godpfotiwgiex Alxjit

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Gsdpou Udp Iefx Alxeit

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 Godpfx Alov Ehbboxsit min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Year of construction: 2025, condition: good (used), functionality: fully functional, Height-adjustable table frame modules for individual use with various panels and superstructures. The upper rails are designed for Demmeler / Siegmund plates with 28 mm holes, sized 3000 x 1500 mm. Electro-hydraulic height adjustment: 650 - 1050 mm. Load capacity: 2,000 kg. Gijdpfxoy Axvve Alxjt

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2374, functionality: not functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 150 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 580 mm, table length: 450 mm, table height: 900 mm, ram plate width: 580 mm, ram plate length: 450 mm, distance table to ram: 430 mm, oil tank capacity: 380 l, total length: 1,200 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 4,200 kg, installation height: 430 mm, pressing speed: 25 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Gijdpfx Aljxyxx Aexjt

Condition: excellent (used), Control unit, heating controller, osmosis control - control box, heating controller, heating control device -Manufacturer: Sauter, equitherm 100 heating controller with accessories, unused, original packaging -Type: EQJW 41 D 10 -Temperature sensor: EGT 30 B 10 / EGT 31 B 10 Gisdpsx Hxcdofx Alxst -Number: 3x heating controllers available -Price: per piece -Transport dimensions: 210/210/H165 mm -Weight: 2 kg/piece

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 28 958, travel distance X-axis: 100 mm, travel distance Y-axis: 160 mm, TECHNICAL DETAILS Maximum permissible pitch circle diameter: 80 mm Maximum gear length: 170 mm Total length: 240 mm Mounting diameter: 32 mm Radial slide travel (X-axis): 100 mm Tangential slide travel (Y-axis): 160 mm Axial movement Z-axis: 300 mm/min Workpiece spindle - bore: 45 mm Giodpfx Alow T Rz Djxet MACHINE DETAILS Approx. machine weight: 7,000 kg Approx. dimensions (LxWxH): 9,130 x 3,895 x 3,450 mm Voltage: 400 V Frequency: 50 Hz Connected load: 45 kVA

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,500 kg, workpiece weight (max.): 750 kg, machine/vehicle number: F101, TECHNICAL DETAILS Pump output: 5.5 kW Heating element output: 4.2 kW Rotary basket load capacity: max. 750 kg Compressed air connection: max. 10 bar MACHINE DETAILS Unladen weight: approx. 1,500 kg Electrical connection Connection: 400 V Current consumption: 63 A Frequency: 50 Hz Godpfxsxztt Dj Alxjit

Condition: like new (used), functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, rotational speed (max.): 10,000 rpm, shaft diameter: 12 mm, mount diameter: 10 mm, shaft length under head: 2,000 mm, space requirement height: 3,000 mm, 5 x Pferd Mammut - Electronic Suspension Motors: In stock at Kinket SSP B.V. These pendant motors offer an excellent solution for many industrial applications such as grinding, polishing, brushing and milling. Features 5 x Pferd Mammut - Electronic Suspension Motors: Infinitely Adjustable Speed: The Pferd Hang motors are equipped with an infinitely adjustable speed, from 100 to 10000 rpm. This allows you to choose the optimal speed to suit the specific tasks and materials you are machining. This gives you complete control over your machining processes. Complete Package for Direct Use: At Kinket SSP, we supply used hanging motors including the necessary trailing contacts and a 12-meter long VAHLE contact rail. Versatile: Whether you work in metalworking, woodworking, plastics processing or other industries, these flexible shaft pendant motors offer versatility and performance to meet your requirements. Their proven track record in various applications makes them a reliable choice for a wide range of machining needs. Quality: The 5 flexible shaft machines are in excellent condition. Each of the machines has been meticulously inspected. Summary: 5 x PFERD flexible shaft machines 5 x suspension brackets 5 x flexible shaft 12x2000mm Gjdpfx Ajtvfnuelxoit 5 x straight handpiece 1 x 12 meter long VAHLE contact rail These machines are completely similar to the Suhner Rotomax suspension motors. Current new price approximately: €36000 Selling price of this well used set: €25000 We also have several new and used flexible shaft machines available from stock ( about 30 pieces ) of the brands Suhner / Biax and Pferd. So if you are interested in a mobile or standing machine is also possible. We also have several used and new handpieces in stock. Orbital sander / right-angle handpiece with pin or m14 thread etc. Please ask us for the current offer.

Year of construction: 2006, condition: used, Technical data of the basic equipment Electrical connection values: Device total 230/400V 50Hz 50A 35 KW Motor washing pump 400/690V 50Hz 9,5A 4KW Heating elements: (3x9kW) 230/400V 50/60Hz 13,5A 9KW Motor steam extraction 230/400V 50HZ 1.1A 0,45kW Motor rotary basket drive 230/400V 50Hz 1.1A 0.37kW Giodpfxen Nyt Ho Alxet Pneumatic connection values: Compressed air supply line min. 6 bar / max. 10 bar Performance data: Wash pump flow rate 280 l/min Delivery pressure washing pump 5 bar Dimensions, weights, contents data: Liquid volume tank 1 washing 650 L liquid volume tank 2 rinsing 265 L perm. basket load 750kg usable basket diagonal 1400 mm usable height in the unit 800 mm loading height 920 mm height approx. 3010 mm width approx. 2365 mm depth approx. 1665 mm empty weight approx. 1320 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: Gijdpfx Ajndk N Aolxjt - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), Kreuter chocolate temperer Gedpfxjfh Tngo Alxjit Model: TMK100 Serial: 7906/91 Refurbished by WolfDE in 2013, 100Kg chocolate temperer, adjustable temp controls, agitation with scrape surface, with all manuals, 3Ph

Condition: ready for operation (used), Year of construction: 2018, A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Gisdpfx Alswhfnpexst

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Gedoxt Hn Sepfx Alxeit Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ Giedpfjy Rkd Ijx Alxst - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Gijdpfx Alory Trpoxot Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm Giodpfx Aev Svb Ajlxjt daylight 1200 mm table surface area 1650 x 1250 mm die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation