Used Scm Scm E10 for sale (1,097)

Condition: ready for operation (used), Year of construction: 2019, This SCM E10 edgebander was manufactured in 2019. It features a 0.4 to 3 mm edgebanding thickness capacity and can handle panel heights from 8 to 80 mm. The machine supports minimum panel dimensions of 50 mm in width and 210 mm in length. It operates with two feed speeds of 4 and 8 m/min and a maximum temperature range of 140 to 220 degrees C. Installed motor power is 3.5 kW. Contact us for more information about this machine. • Edgebanding Thickness Capacity: 0.4 to 3 mm • Thickness of Edges with Shear Device: • (80 mm height) 0.4 to 1.5 mm • (50 mm height) 0.4 to 2.5 mm • (45 mm height) 0.4 to 3 mm • Panel Height Capacity: 8 to 80 mm • Edge Height: 10 to 83 mm • Minimum Panel Width: 50 mm • Minimum Panel Length: 210 mm • Minimum Internal Radius with 0.4 mm Edgebanding: • Concave: 25 mm • Convex: 5 mm • Feed Speeds: 4 and 8 m/min Isdpfx Aeyabmkjb Njat • Maximum Operating Temperature: 140 to 220 degrees C • Installed Motor Power: 35 kW • Overall Dimensions: 39.37" x 29.13" x 43.3"

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Number of milling spindles: 1 Type of milling table: Beam table Tool changer positions: 24 MACHINE DETAILS Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Transport packages: 1 EQUIPMENT Drilling tool Isdpjy Nybtofx Ab Neat Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AHH/157/00, functionality: fully functional, total length: 12,500 mm, total width: 2,400 mm, overall weight: 4,000 kg, Equipment: CE marking, TECHNICAL DETAILS Iaodpfsy Nxrdjx Ab Not The machine has the following configuration: 1. Unit type: Pre-milling unit 2. Unit type: Glue application unit 3. Unit type: Pressure rollers 4. Unit type: End trimming unit 5. Unit type: Rough milling unit 6. Unit type: Corner rounding unit 7. Unit type: Radius scraping unit 8. Unit type: Flat scraping unit 9. Unit type: Brushing unit MACHINE DETAILS Voltage: 400 V Current consumption: 36 A Fuse: 63 A Power: 14.4 kW Dimensions & Weight Dimensions (L x W x H): 12,500 x 2,400 x 1,900 mm Weight: 4,000 kg EQUIPMENT Tools CE marking

Condition: used, machine/vehicle number: 008407, X axis working area: 6700 mm Y axis working area: 1520 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Iodpjycdaxjfx Ab Njat Number of controlled axes: 5 axes Total number of tool changer positions: 48

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Iaodpox A E Tfofx Ab Nst Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Max length workable: 2400 mm Isdpfow Idduox Ab Njat Max height workable: 250 mm

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Iodpfx Abow Idc Rs Noat Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2000, CNC Wood Machining Centre manufactured in 2000. This SCM Windor 60 features multiple vertical profiling spindles and an integrated drilling unit, designed for complex wood profiling and drilling operations. It includes a dedicated window profile machining setup and a multi-station tooling arrangement. If you are looking to get high-quality wood machining capabilities, consider the SCM Windor 60 machine we have for sale. Contact us for further details. • Technical Configuration: • Angular window machining centre • Multiple vertical profiling spindles • Integrated drilling unit • Multi-tool profiling configuration • Freud tooling system installed • Left and right vertical spindle groups • Dedicated window profile machining setup • Complex wood profiling and drilling operations Iaodpsy S A Stefx Ab Njt • Multi-station tooling arrangement

Condition: used, machine/vehicle number: 008468, X axis working area: 3680 mm Y axis working area: 1380 mm Iedpfx Ajy Sgp Asb Nsat Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 34

Condition: excellent (used), Year of construction: 2022, Tilting Spindle Moulder Manufacturer: SCM Model: NOVA TI 105 Year of manufacture: 2022 Table size: 254 x 85 cm Power: 7 kW Tilting: Single-sided 45° Height adjustment: 120 mm Spindle diameter: 30 mm Height and angle adjustment: Electric Left/right rotation: Yes Speeds: 3500/6000/8000/10000 rpm Iodpfx Aey Sg Ncob Nsat Motor brake: Yes Including feeder

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Iasdpfx Abey Dta Ss Not

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Iaodpfx Aex Twdyeb Nst

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Isdpfx Ajx Twcvob Noat

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · X-Y travel: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm C-axis deactivated – 3-axis machine The base structure is a monolithic construction made of thick-walled steel. It is reinforced throughout the entire machine bed with welded-in triangular plates, which makes it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the key to lasting precision and stability. The machine layout allows the operator an optimal workflow despite minimal space requirements. The resulting base frame thus provides the machining unit with a balanced and secure foundation, ensuring excellent load distribution. The mobile unit carrier is built as a solid monoblock. It is positioned in X-direction on ground prismatic guides with recirculating ball carriages. The working unit is again mounted on ground prismatic guides and a recirculating ball carriage on this mobile unit carrier. Description of aggregates and accessories (basic equipment) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill interface: M 10 with 11 mm fitting Grooving saw unit in X: · Integrated in drill head · Grooving saw blade with max. diameter 120 mm Main milling unit (Position 2): · Tool holder HSK 63F · Speed: 1,500 - 24,000 rpm stepless via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Includes: 4 pcs. tool holders (right) without collet Tool changer R8L: Automatic tool changer for 8 tools. Mounted on the rear unit carrier for quick tool access. · Number of tool stations: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight all tools: 22 kg · Holder for 1 angle gear · Moves in X direction Isdpfx Abox Twccs Nsat Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Work table: The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X direction · 12 round vacuum cups D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · Retractable reference stops are CNC controlled · Pendulum machining standard (2 work zones) --- other clamping systems available as options --- Axis movement: The drive system in X, Y and Z is via ground recirculating ball screws...

Condition: excellent (used), CATALOG NUMBER 7901 Technical specifications: - track width: 300mm - working width of roller: 300mm - max saw blade diameter: 350mm - saw blade bore diameter: 70mm - max cutting height: 120mm - table width with extension: 750mm - table length: 1530mm - from above: - kickback prevention barriers (safety barrier against material reverse) - metal sliding roller - kickback prevention barriers - metal sliding roller - shaft with saw blades - 2 smooth metal sliding rollers - from below: - guide rail - kickback prevention barriers - track - central track lubrication - stepless feed speed adjustment - feed motor: 1.5kW - main motor: 22kW - brake - suction nozzle diameter: 200mm - overall dimensions (L/W/H): 2300x1370x1570mm - weight approx.: 1700kg ADVANTAGES – Italian manufacturing – very good condition – technical DTR documentation – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR (calculated at 4.2 PLN/EUR) Iajdpfx Absy S Aake Net (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: - working width: 240 [mm] - working height: 120 [mm] - number of spindles: 6 - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Planer in very good condtion. First owner! Isdpfsizxf Hox Ab Nsat

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 9 m/min, total length: 4,400 mm, total width: 685 mm, Equipment: CE marking, documentation/manual, SCM Olimpic K 230 evo edge banding machine in excellent condition. Bought new, first owner. All documentation and tools are included. Extraction pipes with branches are included up to the shut-off valve. Extra set of diamond pre-milling tools. Additional options: - Rounding unit - Nesting sensors - Riepe bottles at 3 positions - Glue scraper unit Technical data: - Feed speed m/min: 9 - Panel thickness mm: 8 – 60 - Edge band thickness in strips mm: 0.4 – 3 - Edge band thickness on roll (incl. covers) mm: 0.4 – 3 Iajdpfjyxhqnsx Ab Net - Max. cross-section edge material for cutting mm²: 135 - Roll holder diameter mm: 780 - Max. edge band overhang vs. panel mm: 4 (2 – 2) - Min. distance between 2 panels mm: 700 (600*) - Min. panel length (minimum width 100 mm) - With edge band in roll or strips mm: 160 (140*) - With solid wood strips mm: 220 (140*) - Min. panel width with edge band on roll (min. length 210 mm) mm: 90 - Working height of the machine mm: 900 - Width of fixed panel support mm: 500

Condition: used, Year of construction: 2016, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Colour: Grey Empty weight: 1.310 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) Iasdpfx Aexy Rk Rjb Njt - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, working area 2.600 x 1.250 mm Isdpfxsn A Dwgj Ab Neat spindle drive 7,5 kW feed max. 38 m/min x-axis 2.700 mm y-axis 1.600 mm z-axis 250 mm SCM Routech R 3000 CNC machining center for processing sheet material with automatic feeding (vacuum destacker) and discharge. Video: Upon request Special price for self-disassembly and self-collection.

Condition: used, The Invincible Lubrication Iaodpfx Aoy Rrydob Nst Adjustment stops Orientable head 380V

Condition: used, Cart 320cm Tiltable blade Iasdpfxey Rrrye Ab Not slash 380V

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,280 mm, travel distance Z-axis: 150 mm, overall weight: 6,300 kg, spindle motor power: 18,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details. • Typical applications: nesting production; windows and doors manufacturing; stair components production • Table size (L x W): 4200 x 2300 mm • Controlled axes: 3 (X, Y, Z) Iedpfxoyu Rbmj Ab Noat • Axis drives: Brushless motors • Rapid traverse: X 75 m/min; Y 75 m/min; Z 15 m/min • Lubrication: Automatic central lubrication system • Work table: Nesting table; large-format multifunctional aluminum matrix; pressed aluminum construction mounted directly to the base; designed for vacuum clamping of large panels • Main spindle: 1 electrospindle, HSK F63 tool holder; 600–24,000 rpm; 11 kW inverter; up to approx. 18 kW in working range (12,000–18,000 rpm); CW/CCW rotation; air cooling with fan; pneumatic tool clamping • Tool changer: Side tool magazine TR-10; 10 positions; 130 mm spacing; max 8 kg per position; automatic tool change • Workpiece clamping: Vacuum (nesting table); 2 vacuum pumps, 250 m³/h each • CNC control: SCM PC control • Software: Xilog Maestro; Xilog Plus; graphic programming editor; DXF import; subprogram and macro management • Electrical: 400 V; 50/60 Hz • Construction: Heavy welded gantry; high-rigidity industrial frame; aluminum matrix table mounted directly to the base • Safety: Fixed safety fencing on two sides; CE marking • History/condition: One owner since new; used continuously in one company; regularly serviced; technical condition very good Additional equipment • Automatic dust extraction hood

Condition: ready for operation (used), Year of construction: 2003, number of axes: 3, This 3-axis SCM PRATIX 48 NST was manufactured in 2003. It features a working area of approximately 1220 x 2440 mm and is equipped with a vacuum nesting table. The machine includes an HSK electrospindle with a power range of 7.5–9 kW and a tool changer, either linear or side-mounted. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM PRATIX 48 NST machine we have for sale. Contact us for further details. Isdpfxey R Rp Ds Ab Neat • Working area: approx. 4' × 8' (1220 × 2440 mm) • Table: Vacuum nesting table • Spindle: HSK electrospindle, 7.5–9 kW • Tool changer: Linear or side-mounted ATC • Drilling block: Vertical drills (standard) • Controller: SCM Xilog

Condition: used, Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: Isdpfoy I Srzjx Ab Noat - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planing width: 230 mm, Planing and Moulding Machine / Four-Sided Planer Manufacturer: SCM Model: Superset XL Year of manufacture: 2003 Planing machine with 5 spindles (bottom-right-left-top-universal), previously used in a parquet production facility. Working width: 230 mm Working height: 120 mm Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bottom Iaedpey Rk Hcofx Ab Nst Right Left Top Universal spindle Weight approx. 3000 kg