Used Screw Compressor Renner Rs132D (2018) for sale (9,223)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Nwjdpfxjzu Aibe Ag Usk Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, machine/vehicle number: RS18_5_ReAN19440656, pressure (max.): 15 bar, Showcase screw compressor RENNER RS 18.5 - 15 bar Year of manufacture: 2018 Operating hours: 2 operating hours Technical specifications Type: RS 18.5 Operating pressure: 15 bar(ue) Delivery volume at 15 bar, according to ISO 1217 Appendix C: 1.89 m³/min Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Nwodjv Rbvcspfx Ag Uek Sound pressure level: 71 dB(A) Length: 1287 mm Width: 799 mm Height: 1296 mm Weight: 532 kg Compressed air connection: G 1 1/4" Visit our Retail store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar operating pressure 10 bar nominal power 30.0 KW operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - Nwodpfjn Stanex Ag Ujk 1,640 mm weight approx. 850 kg

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Nwodpfxezmub Te Ag Uok

Condition: excellent (used), Year of construction: 2014, operating hours: 52 h, functionality: fully functional, power: 85 kW (115.57 HP), fuel type: electric, operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, 5 × RENNER screw compressors – 2 × RSF 85 + 3 × RSF 45 – Frequency-controlled – Water cooling – Heat recovery – Modbus A total of 5 compressors: - RENNER RSF 85 (85 kW) – 52 operating hours - RENNER RSF 85 (85 kW) – 123 operating hours - RENNER RSF 45 (45 kW) – 22 operating hours - RENNER RSF 45 (45 kW) – 138 operating hours - RENNER RSF 45 (45 kW) – 53 operating hours For sale is a package of RENNER RSF screw compressors in an industrial design. All machines come from an industrial test bench system in our own facility and were procured for a development project. Due to a project change, the test benches never went into productive operation. The compressors were then dismantled and stored. This is a specially configured industrial design with special features and practically no productive runtime: - Frequency control - RENNERtronic Plus control system - Modbus interface – integration into building automation systems possible - allowing external setpoint input (pressure/speed) - Water cooling - Design for high cooling water temperatures (60/80 °C) – but does not necessarily have to be used - High outlet temperature for efficient heat recovery (ideal for heating support) Technical data RSF 85 85 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 14.5 m³/min Water cooling RENNERtronic Plus Modbus RSF 45 45 kW Frequency-controlled Operating pressure 5–10 bar Flow rate up to approx. 7.25 m³/min Water cooling RENNERtronic Plus Modbus The compressors were specifically designed for the utilization of waste heat. The water cooling allows high cooling water temperatures to be achieved, making the systems ideally suited for heat recovery and feeding into heating systems. Nwedpfx Agozi Ukme Ujk The operating pressure can be increased to up to 15 bar by a modification of the pulleys and V-belts as provided by RENNER. A corresponding offer from RENNER is available, but the modification was never needed. Inspection: The machines are dismantled and stored. An inspection is possible at any time by appointment. We will gladly send further photos, nameplates and technical documents upon request. Price: Negotiable / Offers welcome.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Nwedpfx Aozf Ivusg Ujk Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: like new (used), Year of construction: 2018, operating hours: 145 h, machine/vehicle number: MA0003_SN807103, Demonstration Machine available immediately: RENNER RS-18,5 oil-injected screw compressor. Made in Germany The compressor is in very good condition with 45 operating hour. Nodpedulwnsfx Ag Uowk Pressure: 10 bar Rated power: 18,5 kW Delivery quantity: 2620 liters / min Sound level: 71 dB (A) Compressed air output: 1 1/4 " Dimensions Length x Width x Height: 1287 x 799 x 1296 mm Weight: 532 kg Operating hour: 145 Bh

Condition: defective spare-parts repository (used), Year of construction: 2017, operating hours: 26,000 h, functionality: not functional, overall weight: 609 kg, total length: 1,287 mm, total width: 799 mm, total height: 1,296 mm, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 262,800 m³/h, operating pressure: 10 bar, noise level: 72 dB, type of cooling: air, Equipment: documentation/manual, The frequency inverter is defective, but otherwise the unit was fully functional until the end. Regularly maintained. Nwodpfozinwaex Ag Usk Available for sale; offers are welcome.

Condition: good (used), Year of construction: 2010, operating hours: 85,410 h, power: 15 kW (20.39 HP), Screw compressor Nsdpfx Agezu Aw Es Uowk Manufacturer: Atlas Copco Type: GA 15P Year of manufacture: 2010 Operating pressure: max. 9.8 bar Volume flow: 2.39 m³/min Power: 15 kW Operating hours under load: approx. 85,410 h Weight: 500 kg Includes refrigerant dryer.

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Date of manufacture - 2009. Working pressure - 10 bar. Njdpszu Aw Ssfx Ag Ujwk Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Year of construction: 1998, condition: excellent (used), RENNER RS 15 screw compressor ROTORCOMP screw stage, 15KW motor, Capacity 1.92 m3 / min, Pressure 10 bar, Nodpfsh Eu A Nox Ag Uowk THE MACHINE IS FULLY OPERATING. WE HAVE A LARGER NUMBER OF COMPRESSORS FOR SALE SCREWS, REFRIGERATION DRYERS AND EQUIPMENT WELDING. WE PROVIDE REPAIRS AND SERVICE.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Nedpsyb Sdiofx Ag Uowk

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0169, Exhibit in stock immediately available (Plug and Play): RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 540 x 553 x 1014 mm Weight: 198 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors. Nwedpfjity Ecex Ag Usk

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Nedpfx Agszlaa Es Uewk Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: used, Year of construction: 2024, operating hours: 3,900 h, functionality: fully functional, power: 11 kW (14.96 HP), ISC Recycle offers you a high-quality compressor in excellent condition, ready for use. Model: RENNER RSF-PRO-2-11 Condition: Used (Very recent) Nsdpfx Ajzgr Nzog Uewk Year of manufacture: 2024 Power: 11 kW Maximum operating pressure: 10 bar Capacity/Flow rate: 2,040 ltr/min at 6.0 bar Power supply: 400V / 50Hz / 3-phase Do not hesitate to contact us for more information!

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Nwodozb Idrepfx Ag Usk Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 2015, operating hours: 49,800 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 9.8 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Product description: GA75FF A 10 APB 400 50 Product number: 0000090580 | 00000502 | 8153587723 Date of manufacture: 19/03/2015 Model: GA75_12 Product description: GA 75 Brand: Atlas Copco Air receiver mounted / Floor mounted (N) Brand: Atlas Copco (01ATLAS_CO) Commercial power: 75 kW (75KW) Cooling: Air cooled (AIR) Electrical approval: IEC (IEC) Element family: Oil Injected Screw (OIS) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Integrated dryer: Yes (Y) Mk5 expansion module: Yes (Y) Model variant: Workplace Full Feature (W_FF) Pressure vessel approval: CE / ASME (CEASME) Product company: API (API) Regulation: Elektronikon standard (MK5STD) Nwsdpfx Agszvqpfe Usk Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works, the machine is already equipped with the following special equipment: - Integrated refrigerant dryer - Integrated heat recovery - Expansion module Current operating hours: approx. 49,800 hours Used machine, sold as is, without warranty.

Condition: excellent (used), Year of construction: 2014, operating hours: 26,000 h, functionality: fully functional, overall weight: 1,603 kg, power: 55 kW (74.78 HP), 2014 Ingersoll Rand R55i Compressor 55kw screw compressor Full service history Nwedpfx Agozrxhhj Uok Approx 26k hours Very good condition

Condition: good (used), Year of construction: 2018, Screw compressor BLITZ Monsun Fast 11-10, serial number iYD0099288, manufactured in 2018, output 11 kW, maximum pressure 10 bar. Nodpeztcyqofx Ag Uewk

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Nwodpfxjztl Uds Ag Uok

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany Nwodpfx Agsyy U She Uek YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Nedpfxjv Al Nqj Ag Ujwk Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l Nsdox I Izrepfx Ag Ujwk - Integrated dryer RENNER Type RKT + 0065 - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 382 kW (519.37 HP), Description: Screw compressor ZR315VSD Njdpfx Ajvyq Rneg Uewk Characteristics: Capacity 8.60 bar Power 382 kW Voltage 400 V or 500 V Running hours at last maintenance: 7270

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Nodpfozvqp Sox Ag Ujwk Model: GA75_08 Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours Used machine, sold as is, without warranty.