Used Seabird Designs Hybm-2000L-2Layers for sale (14,062)

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HY-43, screw diameter: 110 mm, total width: 2,500 mm, total length: 8,500 mm, total height: 9,500 mm, power: 350 kW (475.87 HP), Equipment: documentation/manual, The two-layer blow molding machine is a new generation of plastic extrusion blow molding equipment. It is mainly used for molding kayaks, canoes, surfboards, and other large hollow plastic products. Bdjdsx R R Igepfx Afwog The machine uses a motor designed to deliver high torque and sufficient power for material cutting. The molten plastic is extruded into a storage die head. When the material reaches the preset volume, the wall-thickness control system continuously adjusts the opening ratio. The extruded material is formed into a parison, which is then molded into the final product.

Condition: excellent (used), functionality: fully functional, GERNAL 2000L | Tilting brewing kettle with hydraulic tilting (Process kettle with heating jacket) Manufacturer: GERNAL Model / Type: Tilting brewing kettle Working capacity: 2000 liters Internal tank dimensions: Ø 1700 x 1400 mm Bdsdpfx Afsy Umuwewsg Overall dimensions: 2300 x 2500 x 2600 mm Heating system: Double jacket Tilting system: Hydraulic Equipment: - Control cabinet - Pallet with accessories This gigantic, industrial brewing kettle with a capacity of up to 2000 liters is an advanced process device designed for food processing plants operating on a large scale. This type of kettle is a key piece of equipment in large meat processing plants, ready-meal factories, fruit and vegetable processing plants, large central kitchens, airline catering facilities, and in the sauce, soup, and culinary base production industry. The tank construction is based on double-jacket heating technology, which prevents direct contact between the raw material and the heating element. This guarantees perfectly even temperature distribution over the entire surface of the large tank (Ø1700 mm) and completely eliminates the risk of burning thick product batches. The most important advantage of the machine is the automatic, hydraulic tilting system of the working chamber. Advanced actuators, powered by an external hydraulic pump, smoothly and effortlessly rotate the kettle, allowing for rapid discharge of the cooked product directly into waiting butcher carts or onto a subsequent transport and dispensing line.

Condition: good (used), Used plastic container Last intended use: Food Article number: 10849 Volume: 2000L Type: Upright Material (in contact with media): Plastic Design: Single-walled Operating pressure according to nameplate: ATM Container dimensions: Outer diameter: 1370mm Cylinder height: 1290mm Total height: 1750mm Outlet diameter: 50mm Total width: 1470mm Total length: 1370mm Bjdpfjvphp Tjx Afwedg Facilities: Nameplate: yes Manhole: 385mm

Condition: used, This listing is for a Ormandy Newade WFI 2000l Storage Vessel. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology Ormandy Newade offers a specialized 2000l Water For Injection (WFI) storage vessel, designed to meet the highest requirements for water purity in the pharmaceutical industry. Key Features: Optimized Capacity: With a capacity of 2000 litres, this vessel is ideal for mid-sized operations, providing a balance between storage efficiency and space requirements. Configuration Flexibility: Available in both horizontal and vertical configurations, the design can be customized based on facility layout and operational needs. Insulation Options: The vessel can be fully or partially insulated, ensuring that the WFI is kept at a consistent temperature and protected from environmental influences. Material Excellence: Constructed from high-grade austenitic and Duplex stainless steel, ensuring superior corrosion resistance and longevity under rigorous conditions. Surface Finish Variety: Surface finishes from SF0 to SF6 are available, adhering to ASME BPE-2022 specifications, which is crucial for maintaining cleanliness and preventing contamination. Compliance and Standards: Industry Standards: Bdsdpsxxy Enjfx Afwsg This vessel is built to comply with key industry standards such as: PD5500 ASME VIII EN 13445 FDA compliant with 3.B1+F material certification. CE Marking: It is CE marked in accordance with the Pressure Equipment Directive, affirming its safety and regulatory compliance for pressurized applications. Applications: Pharmaceutical Production: Perfect for storing purified water used in the formulation of medications, ensuring the highest levels of purity and compliance with regulatory standards. Biotechnology: Suitable for facilities requiring strict control over water quality in bio-processing applications.

Year of construction: 2014, condition: used, This listing is for a Full Mueller PyroPure WFI System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This system is in immaculate condition as the sites steam requirements were “Turned on Time”of the Steam Generator's is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The Mueller PyroPure WFI System stands out as a high-performance, integrated solution for the pharmaceutical and biotechnology industries, focusing on the production, storage, and distribution of ultra-high-purity Water for Injection (WFI). Below is an in-depth look at its components, capabilities, and specifications. Key Components 2x Mueller P7310 Pure Steam Generator High Capacity: Generates from 0 to 700 kg/hr of pure steam, suitable for high-volume operations. Operational Flexibility: Can operate alternately with another unit of the same model, maximizing efficiency and reducing downtime. Regulatory Compliance: Meets USP WFI standards, ensuring suitability for pharmaceutical applications. Maintenance-Friendly Design: Features an external evaporator for easy access and servicing, minimizing contamination risks. Advanced Control: Equipped with an Allen Bradley Compact Logix PLC and an intuitive operator interface terminal (OIT) for real-time monitoring and control. Safety Mechanisms: Includes pressure relief valves and temperature controls to ensure safe operation. Energy Efficiency: Designed to optimize energy consumption, especially when alternating operations between units. Durable Construction: Made from high-quality stainless steel for longevity and hygienic conditions. 1x Mueller P4003 Pure Steam Condensing System Condition: This unit is in full working condition and ready for immediate release. Installed new in 2015 by Freestead Process Technology. Capacity: Produces 100 gallons per hour (379 litres per hour) of WFI-quality distillate, with a pure steam inlet capacity of 807 lb/hr (366 kg/hr). Compliance: Meets stringent USP WFI standards, is CE marked, and FDA compliant with 3.1B material certification. Core Features: Utilizes a tangential nozzle design for superior impurity separation. Drainable components to minimize contamination risks, with electro-polished 316/316L stainless steel ensuring hygienic operation. Bedpsxv Af Eefx Afwjdg Easy maintenance due to a removable tube bundle in the condenser and minimal instrumentation, requiring just 24 inches of clearance for service. 1x Ormandy Newade WFI Storage Vessel Condition: This 2000L WFI storage vessel is also in full working condition, installed in 2015 by Freestead Process Technology. Capacity: Perfectly balances storage efficiency for mid-sized operations with its 2000 litres capacity. Design Flexibility: Available in both horizontal and vertical configurations, customisable based on specific facility layouts. Material Excellence: Made from high-grade austenitic and Duplex stainless steel, ensuring durability and resistance to corrosion. Compliance: Adheres to key industry standards such as PD5500, ASME VIII, and EN 13445, and is CE marked under the Pressure Equipment Directive. 1x Fristam FPE742/185A Centrifugal Pump Condition: This robust 5.5KW sanitary pump is operational and ready for immediate use, also installed in 2015 by Freestead Process Technology. Hygienic Design: Features close internal clearances (as ...

Condition: new, Year of construction: 2024, color: red, loading space volume: 20 m³, loading space width: 2,500 mm, loading space length: 6,900 mm, loading space height: 1,250 mm, gearing type: other, total length: 6,900 mm, driver cabin: other, Vehicle location: in transit, Structure: ARCHIVE IMAGES Roll-off container for water in accordance with DIN 14505 - Water transport for at least 10,000 liters - Length: approx. 6.90 m - Width: approx. 2.50 m - Height: approx. 1.25 m - Permissible total weight: 14,000 kg - Roll-off frame must be manufactured in accordance with DIN 14505:2015 - Water tank with baffles - Dome cover 60 x 60 cm square or round (diameter 60 cm) as entry and cleaning opening - Ventilation valve - Equipment compartment in the rear area for storing 2 B 5m filling hoses, folding containers (Husky 3000 Gal.) and water-carrying fittings, size: min. 80cm deep, 200cm wide, 100cm high, closed with a simple closing flap system or roller shutter - Complete emptying must be possible without a pump at the rear, e.g. two emptying nozzles min. DN 100 with shut-off valves and Storz A coupling DN 125 in the middle of the container with a shut-off valve, also accessible at the rear - Two access nozzles DN 75 with Storz B coupling and shut-off valve, free inlet into the tank, pipe routing in the lower area of the roll-off container on the right and left or both at the back, led outwards - Automatic ventilation and final ventilation valve, volume flow min. 3,000l min - Water level indicator Bdjdpfsvhmqyex Afwog - Color: red RAL 3000 - Storage box for 2 A hoses, dimensionally stable 5 m in roof box design - Plastic coating inside - with overflow possible for use on 3-axle vehicles (tank approx. 11,500L capacity) Delivery time approx. 10 - 12 weeks Available from 5,000-25,000 liters Price depending on the number of liters between EUR 10,000.00 to approx. EUR 20,000.00 per number of liters/volume Available with self-priming water pump, self-lubricating with separate motor, delivery capacity: 129m³/hour 2000l/min, pump height: 17m, grain size: 28mm, fuel diesel, tank: 4.3 ltr., see 2907 for an additional charge of EUR 4,000! Available as a roll-off container and tank ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: BI-183/600, total length: 3,866 mm, total height: 2,841 mm, overall weight: 2,000 kg, input voltage: 400 V, track width: 600 mm, type of input current: three-phase, power: 16 kW (21.75 HP), construction width: 1,500 mm, input frequency: 50 Hz, For sale: Inject Star BI-183/600-C COOL industrial brine injector with integrated cooling, manufactured in 2009. This machine is designed for injecting brine and marinade into meat and poultry products and is suitable for professional use within the meat processing food industry. The COOL version features a cooling system, allowing the brine/marinade to be kept at a controlled temperature during the production process. This is a significant advantage for product temperature, process control, and food safety. Technical specifications: Manufacturer: Inject Star Type: BI-183/600-C COOL Machine: Brine injector Version: with cooling / COOL system Bdedpfx Aszxf Diofwog Year of manufacture: 2009 Connection power: 16 kW Electrical connection: 3 × 400 V / 50 Hz Minimum air pressure: 6 bar Maximum air pressure: 10 bar Machine number: BI1836-123 Stainless steel industrial version CE-marked Suitable for injecting beef, chicken, poultry, and other meat products with brine, marinade, or similar liquids. The machine can be inspected by appointment. Additional information, photos, and technical details are available upon request. English version for MachineSeeker: Inject Star BI-183/600-C COOL industrial brine injector with integrated cooling system, year 2009. The machine is designed for injecting brine and marinades into meat and poultry products and is suitable for professional use in the meat processing industry. The COOL version is equipped with an integrated cooling system, allowing the brine or marinade to be kept at a controlled low temperature during production.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw/resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. Bdodpfxjzxrtqs Afwsg The machine is particularly suitable for cutting and resawing planks and boards and features a continuously variable feed rate and a cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine No.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Continuously variable feed rate Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm length × 600 mm diameter Equipment: Resawing device for cutting planks and boards programmable cutting depth control ELGO Electric Type 87P pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm heavy-duty industrial design Condition and scope of delivery as shown in the photos Important note regarding the control: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site. Transportation possible for an additional fee! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Bdsdpfx Afezv Rhuewsg Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Bdedpfewl H Nijx Afwog Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: used, functionality: fully functional, overall weight: 5,000 kg, plate width: 1,200 mm, plate length: 1,200 mm, Equipment: type plate available, AMF Zero Point System – Clamping System with Zero Point Clamping Plates, Consoles, Hydraulic Unit, and Accessories Manufacturer: AMF System: Zero Point System Year of Manufacture (Components): Primarily 2013 / 2014 Offered is a comprehensive AMF Zero Point clamping system from industrial use. The system consists of several hydraulic zero point clamping plates, zero point clamping consoles, round changeover and clamping plates, intermediate flanges, adapter elements, an AMF high-pressure hydraulic unit, and extensive AMF clamping and system accessories. The components come from a cohesive clamping and machining system and are suitable for creating flexible workpiece, fixture, and pallet clamping systems on machine tools and machining centers. Individual sale of the components is possible. The existing system includes, among other things: - 1 × AMF Hydraulic Unit, Part No. 515841 - 1 × Large quantity of AMF K20 Zero Point Clamping Modules and System Accessories - 2 × Hydraulic AMF Zero Point Clamping Plates approx. 1,200 × 1,200 mm - 2 × Sets of AMF Zero Point Clamping Consoles, each with 4 stations and a total of 8 K20 clamping modules each Bdjdpfx Aozx Akasfwog - 1 × Clamping Plate Ø 650 mm / 8 Clamping Slots - 1 × Clamping Plate Ø 650 mm / 16 Clamping Slots - 1 × Clamping Plate Ø 1,000 mm / 8 Clamping Slots - 1 × Intermediate Flange / Changeover Table Ø 800 mm - 1 × Semi-circular Clamping Device - Several intermediate and adapter rings - 1 × Large Intermediate Flange / Clamping Device Ø approx. 1,250 mm - Various AMF Clamping Modules, Clamping Studs, Height Elements, Couplings, and Hydraulic Lines - Existing technical documentation Key Technical Data: Hydraulic Unit AMF - Part No.: 515841 - Manufacturer No.: 0113 0469 - Operating Pressure: 40–400 bar - Flow Rate: 2.5 l/min - Supply: 400 V / 50 Hz - Motor Power: 1.1 kW - Separate cable-connected control unit - Hydraulic connections with quick-release couplings AMF Zero Point Stations 1,200 × 1,200 mm - Hydraulic actuation - K20 Zero Point Clamping Modules - Operating Pressure: 50–60 bar - Dimensions: approx. 1,200 × 1,200 mm - Weight: approx. 423–424 kg per plate - Years of Manufacture: 2013 / 2014 AMF Zero Point Clamping Consoles - 4 stations per set - 2 K20 clamping modules per station - A total of 8 K20 clamping modules per set - Hydraulic actuation - Operating Pressure: 50–60 bar - Console Height: approx. 143 mm Changeover and Clamping Plates Various designs with: - Ø 650 mm - Ø 800 mm - Ø 1,000 mm - Ø approx. 1,250 mm - Radial T-slots - AMF Zero Point Clamping Modules - Underside clamping studs - Various adapter and mounting options Condition: Used, industrial condition. The components show the usual signs of wear, clamping, mounting, and storage. Some dirt, discoloration, and minor superficial corrosion marks are present. Some of the AMF system accessories are still in their original packaging or appear to be unused. A current functional, leak, or accuracy test of the hydraulic and pneumatic components has not been performed. Sale in the existing condition and scope of delivery as shown in the images. Inspection is possible by appointment. Individual sale is expressly possible.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. This machine is particularly suitable for surface, fine, and paint sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 980 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for paint, fine, and surface sanding Weight: approx. 4,000 kg Bedpfx Afszxy Nyswodg Equipment: Electronic control panel Pneumatic unit adjustment Conveyor belt Dust extraction connections CE marking Important note regarding the pass height: The 1,300 mm you mentioned cannot be correct. For a wide belt sanding machine of this design, the workpiece pass height is usually only in the range of a few hundred millimeters. Therefore, I would not include 1,300 mm in the advertisement unless we are certain of the correct value. Transport possible for an extra charge! The machine is currently still at the customer's location. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to reservation. All information without guarantee.

Condition: like new (used), Year of construction: 2020, operating hours: 9,422 h, functionality: fully functional, We are selling, on behalf of a client, a used, recent-model, like-new 5-axis machining center with a GANTRY design; model DMU 340 Gantry; year of manufacture 2020; 9422 operating hours; 2991 spindle hours. It features a SIEMENS CELOS operator interface. All specifications, technical data, or configurations of the machine are available upon request. Bedpszx Ek Ajfx Afwjdg The machine is available for demonstration and can be inspected immediately. Further original photographs are available upon request and after verification of your identity. A resale to dealers is not currently planned. Please refrain from making such inquiries.

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Bdjdpfx Asrn Sqhofwog Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Year of construction: 2013, condition: used, GEA Sour Cream Thermization Line Capacity: 1,500–2,000 l/h Year: 2013 Installed & Connected – Excellent Overall Condition Complete GEA Process Line We are offering a complete GEA Sour Cream Thermization Line originally designed for the thermal treatment of sour cream and fermented cream products. The line was installed in 2013 and remains installed and connected on site. It is available for inspection and can be offered complete with associated process equipment, automation, and technical documentation. The system was supplied as a complete GEA process line and includes a buffer tank, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and fully automated process control. Main Application Originally designed for: • Sour Cream • Fermented Cream (25% fat) Potential Applications • Kefir • Cultured Buttermilk • Drinking Yogurt • Ayran • Cultured Dairy Beverages • Other fermented and viscous dairy products Process Capacity • Approx. 1,500–2,000 l/h Original Process Parameters • Product: Sour Cream / Fermented Cream (25% fat)• Maximum product viscosity: 230 cP • Feeding temperature: 15°C • Thermization temperature: 55–70°C • Outlet temperature: 20–50°C Scope of Supply 1. Sour Cream Buffer Tank 10,000 L Stainless Steel Insulated Tank • Approx. 10,000 litre capacity • Stainless steel construction • Insulated design • Agitator with 5.5 kW drive • CIP spray balls • Temperature and level instrumentation • Hygienic dairy execution • Complete with service platform and access ladder Manufacturer: • PRO-WAM Year: • 2013 2. GEA Thermization Skid GEA Ecoflex Plate Heat Exchanger System Complete thermization module including: • Regeneration section • Hot water heating section • Cooling section with ice water • Integrated hot water circuit • Stainless steel skid-mounted designMain features: • GEA Ecoflex plate heat exchanger • AISI 316 heat transfer plates • Maximum working pressure: 10 bar • Hygienic dairy construction • Fully integrated process control 3. Pumps & Process Equipment Product Pumps • Tuchenhagen TP centrifugal feed/CIP pump • Tuchenhagen VPSH positive displacement rotary lobe booster pump Process Equipment • Stainless steel process piping • Automated sanitary valves • Distribution valves • Butterfly valves • Temperature instrumentation • Pressure instrumentation • Auxiliary process equipment 4. Hot Water Circuit Complete hot water generation and control package including: • GEA Ecobraze brazed plate heat exchanger • Grundfos circulation pump • Samson steam control valve • Samson on/off valve • Spirax steam equipment • Expansion vessel with safety module • Temperature instrumentation• Pressure gauge 5. CIP Dosing System Integrated CIP dosing and cleaning section including: • Dosing pump • Suction lances with level sensors • Distribution valves • Water shut-off valve • Water reducing valve Designed for automated cleaning and sanitization of the process line. 6. Automation & Control Bdodpfszffzuox Afweg Fully automated process control system including: • Siemens S7-315 PLC • Siemens MP277 10" HMI touch panel • Profibus / Ethernet communication • Automatic thermization control • Automatic CIP control • Alarm management • Process parameter monitoring • Data recording functionality • Festo pneumatic valve island • Stainless steel control cabinets Automation Level • Fully automatic production operation • Fully automatic CIP operation ...

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools Bdedoy Tybnepfx Afwsg -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. This machine is particularly suitable for surface, fine, and paint sanding and features electronic control as well as cross and longitudinal sanding units. Bjdpfx Aozxyfhefwjdg The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 980 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for paint, fine, and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Conveyor belt Dust extraction connections CE marking Important note regarding the pass height: The 1,300 mm you mentioned cannot be correct. For a wide belt sanding machine of this design, the workpiece pass height is usually only in the range of a few hundred millimeters. Therefore, I would not include 1,300 mm in the advertisement unless we are certain of the correct value. Transport possible for an extra charge! The machine is currently still at the customer's location. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to reservation. All information without guarantee.

Condition: ready for operation (used), machine/vehicle number: 2405/73, Year of construction: 1976, Heavy-duty trailer / industrial trailer AEG – 60 t payload For sale is a robust AEG heavy-duty industrial trailer with a payload capacity of 60 tons. The trailer is ideal for internal transport of heavy machinery, equipment, steel structures, and other heavy loads. Technical data: * Manufacturer: AEG * Year of manufacture: 1976 * Payload capacity: 60,000 kg / 60 t * Tare weight: approx. 7,100 kg * Inventory number: 2405-71 * Loading area length: 6.00 m * Loading area width: 2.50 m * Loading height: 1.18 m * Design: Heavy-duty / industrial trailer Due to its high payload capacity, the trailer is particularly interesting for industrial companies, mechanical engineering firms, plant builders, and heavy-load logistics companies. Bsdpfx Aszxnv Usfwsdg Inspection is possible by prior arrangement. Further technical information and photos can be provided upon request. The sale is made excluding any warranty for defects, to the extent permitted by law. Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm Bdedpezu Avbjfx Afwjg • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, pressing force: 2 t, bale length: 1,200 mm, bale width: 500 mm, bale height: 400 mm, bale weight: 100 kg, overall weight: 1,820 kg, This is a fully automatic baling machine that ties the bales with two steel wires (2.2 mm in diameter). A fan blows the waste paper into the machine through special tubes with a diameter of 100 mm. The fan and approximately 10-meter-long tube are included in the price. The machine is in working condition and can be tested. For sale due to lack of use; ideal for baling waste paper from printing and hygiene products. Bodpfjy Ic Rusx Afwsdg

Year of construction: 2026, operating hours: 20 h, condition: like new (used), functionality: fully functional, PE30 Commercial Chocolate Enrobing & Cooling Line – 30kg Tank – 2.7m Cooling Tunnel – Almost New We are selling our complete PE30 chocolate enrobing and cooling line following the closure of our recently launched protein bar production facility in London. The equipment was purchased new specifically for our own production and only went into operation around March 2026. Since then, approximately 25,000 chocolate-coated protein bars have passed through the line, so it has had relatively light commercial use and remains in excellent condition. The equipment is being sold solely due to the closure of our production facility for business and financial reasons – not because of any fault with the machinery. Complete system includes: PE30 chocolate melting & enrobing machine 30kg chocolate melting/holding tank Chocolate enrobing section with stainless-steel mesh conveyor Custom-made acrylic enclosure/cover for improved temperature stability around the chocolate 2.7m refrigerated cooling tunnel Food-grade PU cooling conveyor Copeland compressor External ventilation/extraction fan Associated components supplied with the system The custom acrylic cover was purchased separately and designed specifically for our machine to help maintain a more controlled temperature around the chocolate during enrobing. It is included in the sale. PE30 specifications Manufacturer: Anhui Dixin Machinery Technology Co., Ltd. Model: PE30 Capacity: 30kg Power: 220V / 1 Phase / 50Hz, 1.8kW Material: SUS304 stainless steel Working speed: 2m/min Mesh: 200 × 1000mm Belt: 200 × 1200mm Dimensions: approx. 1230 × 850 × 1450mm 2.7m cooling tunnel SUS304 stainless steel Food-grade PU belt 200mm × 2700mm belt Bdodpezx D Dbofx Afweg 220V / 1 Phase / 50Hz 2.8kW Copeland 2HP compressor Temperature capability down to approx. -15°C Dimensions: approx. 2800 × 850 × 1380mm Weight: approx. 220kg These technical specifications are taken from the original manufacturer's documentation. The system also includes a ventilation fan intended to be installed/vented outside the production area. We used the line for premium chocolate-coated protein bars, but it can also be suitable for energy/nutrition bars, confectionery, biscuits, bakery products and other chocolate-coated products. The manufacturer also specifies the cooling tunnel for a range of food applications. The machine is currently located in Wimbledon, London, UK. Inspection can be arranged, and videos of the equipment operating can be provided to serious buyers. We are also selling other equipment from our protein bar production facility, including protein bar extrusion/forming machinery, chocolate processing equipment, flow-wrapping machines, mixers and stainless-steel production equipment. Machines can be purchased individually or as part of a complete protein/energy bar production line. Collection from Wimbledon, London. Buyer to arrange suitable transport and installation unless otherwise agreed.

Condition: good (used), Year of construction: 2007, functionality: fully functional, For sale is a mobile Hartenberger "Wirex CZ-1/1 band saw / mobile sawmill in a robust design. The system is designed for cutting round timber or logs into boards, planks, and squared timber. The existing hydraulic log handling system with a loading/lifting arm, log turner, and log clamp allows even larger logs to be handled and positioned on the system. Technical data / equipment: Manufacturer: Hartenberger Holzbearbeitungsmaschinen Model: Wirex CZ-1/1 Machine type: Band saw / mobile sawmill Year of manufacture: 03/2007 Engine power: 12 kW Total weight: approx. 2,500 kg Width: approx. 2,355 mm Height: approx. 2,850 mm Mobile design Tandem chassis Electric, continuously adjustable feed Feed rate: approx. 4–35 m/min Electric height adjustment via chain Roller diameter: approx. 500 mm Saw blade length: approx. 4,800 mm Saw blade width: approx. 35–45 mm 1 loading/lifting arm 1 log turner with gripper Bodpfx Afszxrnnowjdg 1 hydraulic log clamp Hydraulic log handling Roller/support track for the logs Dust extraction connections Sturdy steel frame construction Condition and scope of delivery as per photos The machine is currently still at the customer's site. The system is in used condition, with signs of wear and tear appropriate for its age. Inspection and demonstration possible by appointment. Transport possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, intermediate sales and changes reserved. All information without guarantee.

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Bodpfx Afozxuz Dewsdg

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Bdodpfsihf Twsx Afwsg Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swiveling spindle milling machine, manufactured in 1996. This compact and robust milling machine features a milling spindle that can be swiveled up to 45°, several speed settings, and clockwise/counterclockwise rotation. The spindle adjustment is conveniently controlled via the side handwheel. Technical data: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Milling spindle swivels: up to 45° Clockwise/counterclockwise rotation Motor brake Bodpezxx Egsfx Afwodg Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, in condition appropriate for its age and well-maintained. The machine has a compact design and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location. The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sale, and changes are subject to modification. All information is provided without guarantee.