Used Segem Debarking Machine for sale (72,980)

Condition: excellent (used), Debarking plant SEGEM ERT110.5, passage width 110 cm, 5 knives, complete with mechanization. Njdpfx Asxvlm Sofdsdc

Condition: excellent (used), Year of construction: 1998, COMPLETE WOOD DEBARKING PLANT ENTRIENDUNGSMASCHINE SEGEM ERT110.5, FEEDTHROUGH 110 CM, 5 KNIVES Ndedpfxsxvluve Afdsc

Condition: excellent (used), Catalog number: 8058 TECHNICAL DATA - max. log diameter approx. 750mm - main engine 55kW ADVANTAGES – German-made – for debarking logs – used debarker, very good condition – machine equipped with a feeder and an output conveyor – video of the machine in operation *This is a courtesy listing – the machine is located at a sawmill 15 km from the company headquarters. Nsdpezx Sfysfx Afdjdc Net price: 90,000 PLN Net price: 20,930 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! - Minimum length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm Njdpfx Afsw D Hy Sededc - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm incl. rotor - Feed speed up to 114 m/min (currently set to 95 m/min)

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Ndjdpfxsruq Dfs Afdjc

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Nedpfx Ajw Emhfjfdedc Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Ndedpfe Aayk Rex Afdec Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Ndedpfx Afjxxb Rrodec Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Söderhamns Rotary Debarker Cambio 85 - 66 - A Diameter: 10 - 66 cm Ndsdpfx Aoxtc Afofdjc Main motor: 30 kW

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm Nedpfxex D Tbmj Afdjdc ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: not inspected (used), Used Segem debarking machine for sale. Information available upon request. Ndjdpfxozr Ev Sj Afdjc

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting trough for long timber. Spare parts. Nodpewxdimjfx Afdsdc

Condition: as good as new (ex-display), Year of construction: 2025, HÄWA / SWT Maschinenbau Debarking Machine – New -- ---Demonstration unit --- Immediately available - Made in Germany - Model H256 / 800 - Manufactured from a heavy welded steel construction - 4 pairs of main log drive wheels Njdpfx Aexx Am Uofdjdc - 1 split, toothed pair of main log drive wheels - Frequency-controlled log drive - Milling arm made from a heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and guide ring - Milling head equipped with carbide inserts - Hydraulic lowering of the milling head - Frequency-controlled feed for milling head - Log drive wheels 800mm - Log diameter 0.2m – 1.0m - Log length 1.0m – 6.0m - Total connected load 35kW - With HBC radio remote control

Condition: new, Wiedemann Entrindungsanlagen is a family-run company with decades of experience in wood debarking for both stationary and mobile applications. We are manufacturers of debarking machines with rotor openings of up to 120 cm. We also offer butt end reducers and complete log yards. For further information please contact us by e-mail or telephone. Ndedpfxotzftcj Afdec

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM Nodpfsz Eh Egox Afdedc TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately Ndedpfx Afjwt Ry Uedjc

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Nodpfx Afsz St Hwedsdc Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: new, A machine with three functions: debarking, tapering, and chamfering wood. From railings to children’s swings: With the compact standard version S, wood of any kind can be used economically. The three functions – debarking, tapering, and chamfering – allow for the effortless production of logs, posts, and rods. - Trunk diameter: 3-25 cm - Operated by one person - With PTO drive - Blower with pipe bend NW160 Ndsdpfxe Adgdfo Afdec - Simple discharge flap - With 3-point linkage - Including 2 support stands - Including tapering device

Condition: new, Year of construction: 2026, ECS500 / ECS500 E Debarking and Trimming Machine • Weight: 150 kg / 250 kg • Drive: Hub drive PTO / Electric three-phase motor 5.5 kW • Dimensions (L x W x H): 100 cm x 90 cm x 155 cm • 3-point tractor attachment Nodpfx Afer D Nk Nedjdc • Blade disc diameter 500 mm • Blades are resharpenable and replaceable Price: €5,400 / €6,700

Condition: new, One machine, five functions: debarking, tapering, cutting to length, chamfering, and sawing with a single machine. Ndsdpfx Ao Adgd Sjfdjc 1. Debarking: Logs with a diameter of up to 250 mm. 2. Splitting: The V-shaped guide allows the roundwood to be split precisely. The adjustable side stop enables boards to be cut. (Model K500) 3. Tapering: A slope next to the circular saw blade causes the wedges to fall to the ground during the tapering process. 4. Cutting to length: Also for longer pieces (up to 190 mm roundwood). 5. Chamfering: Chamfering the end of the roundwood. Upgrading low-quality wood – continuously adjustable from Ø 30 - 250 mm. Debarked wood is of higher quality and has excellent storage stability. Durable quality thanks to high-quality materials and solid machine construction. Three-point linkage, Category I and II. Tapering device. Blower with pipe bend, Ø 160 mm. Simple discharge flap. Circular saw with 500 mm carbide-tipped saw blade.

Condition: new, Description The AMR EKO E + Scie debarking machine is a versatile and powerful device specifically designed for processing small-diameter timber. With its continuously variable processing range from Ø 40 to 250 mm, it enables debarking, pointing, and beveling of the wood in a single operation. This results in higher-quality debarked wood with excellent storage stability. The machine impresses with its durable quality, based on high-quality materials, as well as a pointing device and a powerful fan with a pipe bend of Ø 160 mm. The simple discharge flap and the two support stands ensure user-friendly operation. In addition, the machine is equipped with a circular saw, which further enhances its functionality. - Enhance the value of small-diameter timber - continuously variable from Ø 40 - 250 mm - Debark, point, and bevel with a single machine - Debarked wood is of higher quality and has excellent and long-lasting storage stability - Universally applicable via PTO shaft or electric motor - Durable quality due to high-quality materials - Pointing device - Fan with pipe bend Ø 160 mm - Simple discharge flap - 2 support stands - Incl. circular saw Ndsdpfxe Adgg Ho Afdec Drive: Electric motor 400 V/11 kW Debarking knives: 4 Saw blade wood diameter: approx. 170 mm Wood length: 1,500-3,000 mm Wood diameter for pointing: 40-150 mm Wood diameter for debarking: 40-250 mm Maximum speed: 2,400 rpm Feed knives: 2 Circular saw blade, carbide: Ø 500/30

Condition: new, A machine with three functions: debarking, tapering, and beveling wood. From railings to children’s swings: With the compact standard model S, wood of any kind can be used economically. The three functions – debarking, tapering, and beveling – allow for the effortless production of roundwood, posts, and poles. - Trunk diameter: 3-25 cm - Operated by one person Nsdpfs Adgdljx Afdodc - with 400V/11kW electric motor - with electromechanical brake - Blower with pipe bend NW160 - simple discharge flap - with 3-point linkage - incl. 2 support stands - incl. tapering device

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC. Ndedpez R Rbdofx Afdec

Condition: new, One machine, five functions: debarking, tapering, cutting to length, chamfering, and sawing with a single machine. 1. Debarking: Logs with a diameter of up to 250 mm. 2. Splitting: The V-shaped guide allows the roundwood to be split precisely. The adjustable side stop enables boards to be cut. (Model K500) 3. Tapering: A slope next to the circular saw blade causes the wedges to fall to the ground during the tapering process. 4. Cutting to length: Also for longer pieces (up to 190 mm roundwood). 5. Chamfering: Chamfering the end of the roundwood. Upgrading low-quality wood – continuously adjustable from Ø 30 - 250 mm. Ndodpfx Aj Adgd Eefdjc Debarked wood is of higher quality and has excellent storage stability. Durable quality thanks to high-quality materials and solid machine construction. Three-point linkage, Category I and II. Tapering device. Blower with pipe bend, Ø 160 mm. Simple discharge flap. Circular saw with 500 mm carbide-tipped saw blade.

Condition: new, Description The AMR EKO P + Scie debarking machine is a versatile device for upgrading low-grade timber with a diameter of Ø 40 - 250 mm. With this machine, debarking, tapering, and beveling can be performed in a single operation, resulting in debarked timber with higher quality and improved storage stability. Thanks to the use of high-quality materials, the machine guarantees long-lasting quality. The three-point linkage is compatible with Cat. I and II tractors. For further optimization, the machine is equipped with a tapering device, a fan with a pipe bend Ø 160 mm, and a simple discharge flap. Two support struts also provide additional stability. Included is a circular saw, which expands the functionality of the debarking machine. - Upgrade low-grade timber – continuously adjustable from Ø 40 - 250 mm - Debarking, tapering, and beveling with one machine - Debarked timber becomes higher quality and has very good and long storage stability - Universally applicable via PTO shaft or electric motor - Long-lasting quality thanks to high-quality materials - Three-point linkage Cat. I and II for EKO P - Tapering device - Fan with pipe bend Ø 160 mm - Simple discharge flap - 2 support struts - Incl. circular saw Drive with tractor: from 25 HP Circular saw blade, carbide-tipped: Ø 500/30 Debarking knives: 4 Njdpfxe Adggmj Afdedc Timber diameter: approx. 170 mm Timber diameter: 40-250 mm Feed knives: 2 Timber length: 1,500-3,000 mm Timber diameter: 40-150 mm Max. speed: 2,400 rpm