Used Senergie Gmbh Used Chp Unit for sale (105,127)

Condition: used, Year of construction: 2008, Name: Used CHP Unit Manufacturer: SEnergie GmbH Type: G6.12TI Year built: 2008 Generator: NEWAGE STAMFORD Chodpfx Ahey Am Rnjmec Generator Type: UC.I274D2 Generator kW: 100 kW Fuel type: Sewage gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88,9 % Dimensions: L 3.500 x W 1.100 x H 2.500 mm Empty weight: 3.000 kg Technical doc.: Yes Message: In 2018 a new engine was installed and the generator was rewound. Last service on October 15. 2021 with 86.102 hours. Accessories: A switch cabinet Condition: Second hand Price: On demand

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Chedpfx Ahez Iyq Tomec

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site. Cjdoz Hngmjpfx Ahmehc

Condition: used, Year of construction: 2005, operating hours: 140,000 h, functionality: limited functionality, Name: Used CHP Unit Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year built: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel type: Sewage gas Chjdpowyax Tsfx Ahmec Electrical power: 53 kW Thermal power: 87 kW Driving force: MAN E0836 E302, 6 Zylinder, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Empty weight: 2200 kg Technical doc.: Yes Message: The Engine was changad in 2013 Condition: Used Price: On demand

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning, rotary valve airlock, silencer, frequency inverter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the cleaned return air was fed back into the production area. The filter system is labeled with H1 and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial No.: 000909 Airflow rate: 10,500 m³/h Filter area: 62.5 m² Weight of the filter system: approx. 1,600 kg Filtration: surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter unit: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is separately rated with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency inverter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary valve airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of blades: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Capacity: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: The system includes: - Silencer, connection Ø 400 mm - Return air duct to the production hall - Complete system control - Danfoss frequency inverter - Automatic pneumatic filter cleaning - Rotary valve airlock - Extensive galvanized dust extraction and return air ductwork Large parts of the existing pipelines can be taken over after consultation. The system is still in its assembled condition. This allows the installation, duct routing and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Removal by: July 31, 2027 at the latest The system is sold in its current assembled condition. Dismantling, removal, loading and transport are entirely the responsibility of the buyer and at their own expense. If sold abroad, transport, export/import and customs duties will also be borne by the buyer. Inspection possible by appointment. Sale as is, without warranty. Cjdpfxez Ikzpo Ahmohc Selling price: 15,500.00 EUR Price net, any applicable taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2009, operating hours: 64,000 h, functionality: limited functionality, overall weight: 2,500 kg, fuel type: gas, motor manufacturer: MAN, Köhler & Ziegler MAN GAS Combined Heat and Power Plant (CHP) 54 kW - Leroy Somer Generator We are offering a Combined Heat and Power Plant (CHP) ⭐︎ Condition: The CHP unit is used but in good condition. ⭐︎ Condition: good (used) Fully operational and well maintained! Recently dismantled! The MAN E0834 E302 is a stationary natural gas aspirated engine primarily used in combined heat and power plants (CHP) for the simultaneous generation of electricity and heat. This four-stroke Otto gas engine features a compact design with four cylinders in-line. Manufacturer: Köhler & Ziegler, Germany Engine: - Manufacturer: MAN - Engine type: MAN E0834 E302 - Design: 4-cylinder in-line engine, water-cooled - 4.6 litre - 1500 rpm Generator - Manufacturer: Leroy Somer (Germany) - 90 kW - 3 phase 400 Volt - 50 Hertz - Operating hours: approx. 64,000 hours Dimensions: L:3100 mm x W: 1000 mm x H: 2000 mm Codpfx Aey Rz N Uohmjhc Weight: approx. 2500 kg Condition: - Used – Good The generator was used in a publicly accessible building. Regular maintenance was carried out ⭐︎ Further technical data: see photos. Scope of delivery as shown Will be delivered as shown Inspection before purchase is possible and expressly encouraged. All our items are dismantled, cleaned, and visually checked for damages by our qualified personnel before sale. For all item-relevant data/information, please refer to the description and photos. All statements are made to the best of our knowledge and belief. The offered goods are sold as described and inspected. International buyers welcome Please inquire for shipping costs to Europe and overseas #2. Storage Shelf 44-1-8 Scope of delivery: - MAN GAS CHP unit 54 kW - With electrical control cabinet Shipping: - Nationwide transport within Germany is available for an additional charge - To provide an exact freight quote, please send me a request with your ZIP code

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Csdpfxez D Htgs Ahmehc Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design Cjdpszizkyefx Ahmjhc ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. Cjdez Irfvepfx Ahmshc New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Year of construction: 2021, condition: used, Refrigeration Dryer – ALUP ADD 36 Manufacturer: ALUP Kompressoren GmbH Model: ADD 36 (1) Year of manufacture: 2021 Machine type: Refrigerated compressed air dryer Description The ALUP ADD 36 is a refrigerated compressed air dryer designed to remove moisture from compressed air systems. The unit ensures dry and clean compressed air, protecting pneumatic equipment and improving the reliability of production systems. This dryer is suitable for industrial applications where consistent air quality is required, including manufacturing, packaging, and processing lines. Technical Specifications - Manufacturer: ALUP Kompressoren GmbH - Model: ADD 36 (1) - Year: 2021 - Product number: 4102005889 - Serial number: ITJ560627 - Power supply: 230 V - Frequency: 50 Hz - Power consumption: 0.236 kW - Phase: 1 Ph Operating Specifications - Working pressure: 15 bar - Maximum pressure: 15 bar Codpfxoyt H Due Ahmshc - Maximum inlet temperature: 55 °C - Maximum ambient temperature: 43 °C - Refrigerant type: R513A Key Features - Reliable moisture removal from compressed air systems - Compact and energy-efficient design - Protects pneumatic tools and machinery - Suitable for continuous industrial operation - Easy integration into existing compressor installations Applications - Industrial compressed air systems - Food and packaging production lines - Manufacturing facilities - Pneumatic equipment protection Condition Used. More photos and full specifications: /

Year of construction: 2025, condition: new, functionality: fully functional, Unused, brand new CHP unit with a TOYOTA 4Y engine, all-in-one design, employing a “plug and play” concept for easier and cost-effective installation, a user-friendly interface, a safety module for enhanced hardware protection, and a single-bearing generator to minimize potential engine damage. This 20 kWe CHP unit is ideally suited for locations with a continuous demand for both electricity and heat. The key to CHP’s economic viability lies in utilizing the heat generated in conjunction with electricity production. Product location: Indop, d.o.o., Primorska 6a, 3325 Šoštanj, Slovenia. Codpszl H Atjfx Ahmehc

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Cjdpfx Ahozw Ukcomjhc Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2020, condition: used, functionality: fully functional, Flow rack with picking aid Rack information: Codpfxjzz Ruxj Ahmjhc - 131 product compartments + 4 return compartments: - 5 units from left to right (1st unit: 26 compartments / 1 return. 2nd unit: 28 compartments. 3rd unit: 26 compartments / 1 return. 4th unit: 26 compartments / 1 return. 5th unit: 25 compartments / 1 return (originally 26 compartments / 1 return)) - 5th unit - 25 compartments, accessible with Strödter lifting aid - The supermarket can also be modularly assembled in other widths and with different compartment layouts. - At the beginning of 2025, 4 compartments were converted to reinforced rollers and an extended insertion area. - Manufacturer: AQS Logistic Systems GmbH; Siemensstraße 5; 57290 Neunkirchen - Year of manufacture: 2020 - Dimensions: Depth: 12m / Width: 5 units, each 7.5m --> Total width: 38m - Shelves: Dimensions: 800x400x20 L/W/H, 294 pieces, new and original packaging available. - Spare parts available - Attention! Rollers are partially defective. Lifting aid information: - The picking aid from Strödter Handling Technology GmbH was manufactured in 2023. Its gripper can be pivoted from top to bottom (90°C) and was designed for removing toilet bowls from the rack. The toilet bowls were removed from the flow rack using the lifting aid, tilted by 90°, and placed on a tray on a pallet. - Thanks to a new gripper, the lifting aid can also be used for any products. The maximum load capacity is 45 kg. Additional information: The flow rack and the lifting aid can also be purchased separately.

Condition: used, Year of construction: 2013, functionality: fully functional, 2 units available, including silencer and gas control unit. Csdpjz D S Ngofx Ahmehc

Year of construction: 2014, operating hours: 59,436 h, condition: used, functionality: fully functional, machine/vehicle number: 100010336, Buderus Loganova EN20 CHP Unit, 19 kW electric / 38 kW thermal For sale is a Buderus Loganova EN20 combined heat and power (CHP) unit manufactured in 2014. The unit comes from a commercial property in 70567 Stuttgart and is being decommissioned due to an upgrade of the energy supply. Since commissioning, the CHP unit has been regularly serviced as part of a premium maintenance contract. A documented service history is available. °°°Technical Data:°°° * Manufacturer: Buderus Chjdpjzv Sfnsfx Ahmjc * Type: Loganova EN20 * Serial Number: 100010336 * Year of Manufacture: 2014 * Electrical Power: 19 kW * Thermal Power: approx. 38 kW * Fuel: Natural Gas * Fuel Power: 35–56 kW * Electrical Operating Range: 9.5–19.0 kW * Supply Voltage: 400 V * Rated Current: 36 A * Rated Frequency: 50 Hz * Pre-fuse: min. 63 A * Gas Inlet Pressure: 20–65 mbar * Max. Supply Temperature: 85 °C * Max. Operating Pressure: < 6 bar * Device Type: B23 * Protection Class: IP40 * Rated Speed: 1,522 rpm °°°Operating Hours:°°° * 59,436 operating hours * 6,031 start cycles °°°Condition:°°° The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. Based on initial assessment, the heating water pump is defective. The CHP unit is currently out of operation and is being offered with the corresponding repair requirements. °°°Location:°°° 70567 Stuttgart, Germany The planned decommissioning or dismantling is expected to take place between August and September 2026. An inspection is possible after prior arrangement. We will gladly provide additional photos, technical documents, and information on the available service and maintenance history upon request. Sale of a used technical unit in its current condition.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 81159538275956, power: 275 kW (373.90 HP), number of cylinders: 12, rotational speed (min.): 1,500 rpm, overall weight: 1,763 kg, Available MAN based woodgas modules. Available quantity - 23 units. Never used (new) Under separate agreement for potential buyers we offer service of rebuilding these engines to natural gas or diesel specs. MAN V12X-2200  12 cylinders. 29,6 litres displacement  Bore 138 mm, stoke 165 mm  Power 1618 kW MAN V12X-2000  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1471 kW MAN V12-1900  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1397 kW Chedpjxcudaofx Ahmjc MAN V12-1650-1800  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power V12-1650-1213kW, V12-1800-1324kW MAN V12-1550-1400  12 cylinders. 24,2 litres di  Bore 128 mm, stoke 165 mm  Power V12/1550-140KW-1213KW, V12/1400-1029KW MAN diesel engines for commercial shipping MAN D3872 (LIGHT, MEDIUM-DUTY OPERATION)  12 cylinders. 29,6 litres displacement  Bore 138 mm, stroke 165 mm  Power 1471 - 1618 kW / 1213 Kw MAN D2862 DUAL FUEL (MEDIUM DUTY OPERTAION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 794kW MAN D2862 (LIGHT, MEDIUM & HEAVY-DUTY OPERATION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 1029-1471 kW / 749-1066kw / 551-735Kw MAN Auxiliary engines MAN D2862  12 cylinders. 24,24 litres displacement  Bore 128 mm, stroke 157 mm  Power 600-800kW

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Chsdpsz Ixc Ijfx Ahmoc

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. Codpszz Rpcsfx Ahmjhc - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control Chjdjz Agv Ujpfx Ahmoc - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm Codpfxez Agw Eo Ahmshc - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Csdoz Ag Rropfx Ahmohc Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit (180 kW) A professional, industrial-grade refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. The unit is in excellent, well-maintained condition commensurate with its age and was in reliable operation right up until recently. Thanks to the modern R513A refrigerant, the unit is future-proof and meets current environmental and efficiency standards. Technical Data (according to nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of Manufacture: 2019 Refrigerant: R513A (Max. charge weight: 98 kg) Chodpfjzrlzzex Ahmoc Operating Voltage: 400 V / 50 Hz Operating Current: 85.4 A (Max. operating current: 141 A) Max. Operating Pressure: LP 19 bar / HP 28 bar CE Certified: Yes (Number 0036) Performance Data & Application Range Cooling Capacity: 180 kW – Ideal for the efficient cooling of large halls or commercial spaces. Heating Capacity: 290 kW – Highly efficient air heating through the smart utilization of waste heat from the refrigeration process. Dehumidification Capacity: approx. 100 liters per hour – Perfect for precise humidity control. Areas of Application: With this combination of performance capabilities, the unit is ideally suited for industrial production halls, large warehouses, and logistics centers, as well as for demanding process cooling and commercial dehumidification tasks. "A complete solution from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Year of construction: 2012, condition: excellent (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. Cjdozklcijpfx Ahmjhc The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Item No.: B84181 Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2012 with ECU: 2 units 2012 without ECU: 3 units 2014 with ECU: 1 unit 2014 without ECU: 1 unit Total available: 7 units

Condition: used, Year of construction: 2005, operating hours: 140,000 h, Name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year built: 2005 Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Fuel type: Sewage gas Electrical power: 53 kW Thermal power: 87 kW Driving force: MAN E0836 E302, 6 Zylinder, 56kW Dimensions: L 3.600 x W 950 x H 1.750 mm Empty weight: 2.200 kg Codjwyaxgjpfx Ahmshc Technical doc.: Yes Message: The engine was changed in 2013 Condition: Second hand Price: On demand

Condition: good (used), Year of construction: 2011, 2x Mobile conveyor systems for unloading trucks/swap bodies, etc. – used: Price per unit, ex works: only €950 (net), including loading! If both systems are purchased, we will add a non-powered roller conveyor! Approx. 4 x 3 m, with feet for easy movement! One system consists of 2 belt conveyors (powered) and a roller conveyor that can be connected/extended. Of course, only one belt conveyor and the roller conveyor can also be used, etc. Manufacturer: SRD Maschinenbau GmbH Type: Mobile conveyor system Year of manufacture: 07.2011 Codpfx Asz Dtinshmjhc SERIAL NUMBER: 3447 Element width: approx. 80 cm Belt width: approx. 65 cm Length of belt element: 4.10 m Length of roller conveyor: approx. 5 m Total length when all 3 elements are assembled: approx. 13 m! Roller diameter approx. 5 cm, roller length approx. 60 cm Height: approx. 75 cm Connection values: 400V/50Hz 16A Condition: good Available: immediately Location: Hamburg